ASYS EX-1166HMV User manual

Anleitung
Vers. 1.0 / 15.02.18
Manual
4 Port USB 2.0 Metal HUB,
screw lock
EX-1166HMV
4 Port USB 2.0 Metall HUB,
verschraubbar

2
EX-1166HMV
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
1. Beschreibung······················································································ 3
2. Lieferumfang ······················································································ 3
3. Aufbau & Anschlüsse ·········································································4-5
3.1 Aufbau······································································································ 4
3.2 Anschlüsse······························································································4-5
4. Hardware Installation············································································ 5
5. Treiber Installation ··············································································· 6
6. Reinigung ·························································································· 6
7. Technische Daten················································································ 7
8. Technische Zeichnung·········································································· 7
1. Description ························································································· 8
2. Extent of Delivery ················································································ 8
3. Layout & Connections·······································································9-10
3.1 Layout ······································································································ 9
3.2 Connections ··························································································9-10
4. Hardware Installation···········································································10
5. Driver Installation················································································11
6. Cleaning ···························································································11
7. Technical Information ··········································································12
8. Technical Drawing ··············································································12
Inhaltsverzeichnis
Index

3
EX-1166HMV Deutsch
Der EX-1166HMV ist ein USB 2.0 Metall HUB für bis zu 4 Endgeräte. Der Hub ist mit 4
Ports für Endgeräte und 1 Port für den Anschluss an den PC ausgestattet. Er unterstützt
alle USB Anschlüsse von 1.1 bis 3.1. Jeder Anschluss an der EX-1166HMV ist zusätzlich
verschraubbar. Durch die Stromversorgung über die 5V Buchse, werden an jedem Port
die vollen 500mA zur Verfügung gestellt. Der USB 2.0 Bus unterstützt optimal die Leis-
tung des schnellen NEC Chipsatz. Der EX-1166HMV gewährleistet so eine sichere Da-
tenübertragung und exzellente Performance von bis zu 480Mbit/s. Er unterstützt den Self
Power und Bus Power Modus.
Merkmale:
• Kompatibel zu USB 1.1, 2.0, 3.0 & 3.1
• Bis zu 480Mbit/s
• Es werden alle Betriebssysteme unterstützt
• Alle Anschlüsse sind verschraubbar
• Zertifiziert für
Bevor Sie den EX-1166HMV an Ihren PC anschließen, überprüfen Sie bitte zuerst den
Inhalt der Lieferung:
• EX-1166HMV
• Netzteil (5V/2A) (verschraubbar)
• USB 2.0 Kabel (verschraubbar)
• Anleitung
1. Beschreibung
2. Lieferumfang
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved

4
Deutsch EX-1166HMV
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3.1 Aufbau
3.2 Anschlüsse
3. Aufbau & Anschlüsse
5V Buchse:
ACHTUNG!!!
Nur zur Verwendung mit im Lieferumfang enthaltenem Netzteil!
4x USB 2.0
Downstream A-Buchse
(verschraubbar)
1x USB 2.0
Upstream B-Buchse
(verschraubbar)
5V Buchse
(verschraubbar)
für im Lieferumfang
enthaltenem Netzteil
Status LED
für jeden Port
Betriebs LED

5
EX-1166HMV Deutsch
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3. Aufbau & Anschlüsse
3.2 Anschlüsse
USB 2.0 A-Buchse:
USB 2.0 A-Buchse
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND
USB 2.0 B-Buchse:
USB 2.0 B-Buchse
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND
4. Hardware Installation
Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwi-
schen PC‘s gibt, können wir Ihnen nur eine generelle Anleitung zum Einbau der EX-
1166HMV geben. Bei Unklarheiten halten Sie sich bitte an die Bedienungsanleitung
Ihres Computersystems.
1. Verbinden Sie das mitgelieferte USB Kabel mit der USB B-Buchse des Hub´s.
2. Verbinden Sie jetzt den Stromanschluss des im Lieferumfang enthaltenem Netzteils
mit der 5V Buchse des Hub´s und stecken Sie den Netzstecker des Netzteils in eine
Steckdose.
3. Verbinden Sie nun das andere Ende (A-Stecker) des mitgelieferten USB Kabels mit
der A-Buchse an Ihrem PC.

6
Deutsch EX-1166HMV
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
6. Reinigung
5. Treiber Installation
Alle Betriebssysteme
Nach Abschluss der Hardwareinstallation erkennt das Betriebssystem den EX-
1166HMV automatisch und installiert diesen.
ÜBERPRÜFEN DES INSTALLIERTEN TREIBER
Öffnen Sie den >Geräte-Manager<. Jetzt müssten Sie unter „USB-Controller“folgen-
de Einträge sehen:
Sind diese oder ähnliche Einträge vorhanden, ist der USB Hub richtig installiert.
Zur Reinigung des Gerätes verwenden Sie bitte ausschließlich ein trockenes nicht fa-
serndes Tuch und entfernen Sie die Verschmutzung mit leichtem Druck. Im Bereich der
Anschlüsse bitte darauf Achten, dass keine Fasern des Tuchs in der Buchse hinterlas-
sen werden. Verwenden Sie bitte zu Reinigung in keinem Fall ein feuchtes oder
nasses Tuch!

7
EX-1166HMV Deutsch
8. Technische Zeichnung
7. Technische Daten
Chip-Set: NEC uPD720112
Datentransfer-Rate: 480Mbit/s
Anschlüsse: 4x USB 2.0 A-Buchse (verschraubbar), 1x USB 2.0
B-Buchse (verschraubbar), 1x 5V Buchse (verschraubbar)
Hardwaresystem: USB 1.1, 2.0, 3.0 & 3.1
Betriebssystem: Alle Betriebssysteme
Betriebstemperatur: 0° bis 55° Celsius
Lagertemperatur: -20° bis 85° Celsius
Rel. Luftfeuchtigkeit: 5% bis 95%
Stromversorgung: +5 Volt
Abmessung: 152 x 60 x 23 mm
Gewicht: 300g
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved

8
English EX-1166HMV
The EX-1166HMV is a plug & play high-speed USB 2.0 metal hub for 4 USB devices.
The EX-1166HMV provides 4 ports for USB devices and 1 uplink port for PC. It sup-
ports all USB connections from 1.1 to 3.1. Each port of the EX-1166HMV is additionally
screw lock. The power over the 5V connector provides a maximum of power on each
USB port of 500mA. The EX-1166HMV design fully utilize the NEC chipset, which rep-
resents the latest in high speed USB interface technology. It uses data transfer rates up
to 480Mbit/s. It provides a secure and very high data transfer on each single port. The
EX-1166HMV support the Self Powered and Bus Powered mode.
Features:
• Compatible for USB 1.1, 2.0, 3.0 & 3.1
• Up to 480Mbit/s
• All Operating Systems are supported
• All ports are Screw Lock
• Certificate for
Before you connect the EX-1166HMV to your PC, you should first check the contents of
the delivery:
• EX-1166HMV
• Power Supply (5V/2A) (screw lock)
• USB 2.0 Cable (screw lock)
• Manual
1. Description
2. Extent of Delivery
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved

9
EX-1166HMV English
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3. Layout & Connections
3.1 Layout
3.2 Connections
5V Connector:
ATTENTION!!!
Use only with Power Supply which is included in delivery!
4x USB 2.0
Downstream A-Port
(screw lock)
1x USB 2.0
Upstream B-Port
(screw lock)
5V Connector
(screw lock)
for included external
Power Supply
Status LED
for each Port
Power LED

10
English EX-1166HMV
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
3. Layout & Connections
Because there are large differences between PC’s, we can give you only a general in-
stallation guide. Please refer your computer’s reference manual whenever in doubt.
1. Connect the USB cable to the USB B-Port at the Hub.
2. Connect the included power supply to the 5V connector at the Hub.
3. Now connect the other end from the USB cable (A-Plug) to the A-Port at your PC.
3.2 Connections
USB 2.0 A-Port:
USB 2.0 A-Port
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND
USB 2.0 B-Port:
USB 2.0 B-Port
Pin Signal Pin Signal
1VCC 3DATA+
2DATA- 4GND
4. Hardware Installation

11
EX-1166HMV English
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
6. Cleaning
5. Driver Installation
All Operating Systems
After the hardware installation the OS will recognize the device automatically and install
the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „USB-Controller“the following
new entry's:
If you see this or a similar information the device is installed correctly.
For cleaning please use only a dry fluff less cloth and remove the dirt with gently pres-
sure. In the area of the connectors please make sure that no fibres from the cloth re-
main in the connectors. Attention! Never use a moist or wet cloth for cleaning!

12
English EX-1166HMV
7. Technical Information
Chip-Set: NEC uPD720112
Data Transfer Rate: 480Mbit/s
Connectors: 4x USB 2.0 A-Port (screw lock), 1x USB 2.0 B-Port
(screw lock), 1x 5V Connector (screw lock)
Hardware System: USB 1.1, 2.0, 3.0 & 3.1
Operating System: All Operating Systems
Operating Temperature: 32°F to 131°Fahrenheit
Storage Temperature: -40°F to 185°Fahrenheit
Rel. Humidity: 5% to 95%
Power: +5 Volt
Size: 152 x 60 x 23 mm
Weight: 300g
Copyright 2018 by EXSYS Vertriebs GmbH. All Rights Reserved
8. Technical Drawing