Atak A700SI User manual

0
Model: A700SI
DIGITAL PHOTO FRAME
Precautions and maintenance
●For indoor use only
●To avoid risk of fire or electric shock, do not expose the unit to moisture or
condensation.
●To avoid overheating, do not block the ventilation holes on the back of the Digital Photo
Frame.
●Keep the Digital Photo Frame out of direct sunlight.
●Always use the eject buttons on the memory storage card slots to remove the storage
cards.
●Do not dismantle the Digital Photo Frame. There is a risk of electric shock and there are
no user-serviceable parts inside. Dismantling the Digital Photo Frame will void your
warranty.
Cleaning the LCD Screen
●Treat the screen carefully. Because the screen of the Digital Photo Frame is made of
glass and it would easily be broken or scratched.
●If fingerprints or dust accumulate on the LCD screen, we recommend using a soft,

1
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
●Moisten the cleaning cloth with the cleaning solution and apply the cloth to the screen.
WARNING: Turn the power OFF before inserting or removing a media card or USB
device. Failure to do so may cause damage to the media card, USB and the unit.
Features:
1. Supported Photo format: JPEG
2. USB Connection: USB2.0 HOST
3. Memory Card: SD/SDHC/MMC
4. Built-in flash memory to store pictures
5. View pictures in thumbnail mode
6. Auto Slideshow detects and plays a Memory Card or USB
7. Built-in Clock and calendar with slideshow
8. Image-display modes: slideshow, preview, zoom, rotate function.
9. Adjustable slideshow speed --10 kinds of transition slideshow
10. Adjustable brightness, contrast, saturation
11. Copy and delete function
12. OSD Language: Default: English (French & Spanish available in setup menu)
Packing Check List:
1. 7 inch digital photo frame 1 piece
2. User manual 1 piece
3. AC/DC adapter 1 piece

2
CONTENTS
1. Product Diagram········································································································· 3
1.1 Left Side of Frame ··································································································3
1.2 Back Buttons of Frame ···························································································3
2. Getting Started ···········································································································3
3. Operating Instruction ·······························································································4
3.1 Main Menu·············································································································4
3.2 Picture Mode ········································································································· 4
3.3 Copy & Delete Function ··························································································5
4. File····························································································································5
5. Calendar ····················································································································6
6. Setup ························································································································6
7. Stand Instruction ········································································································7
8. Technical Specifications······························································································7
9. Troubleshooting Guide································································································7

3
1. Product Diagram
1.1 Left Side of Frame
1.2 Back Buttons of Frame
2. Getting Started
2.1 Extend the digital photo frame stand on the rear to the widest position for greatest
stability. Plug one end of the AC adapter into a standard 110-240V AC outlet and
the other end into the right side the frame (DC 5V).
Note: There are different positions for the digital photo frame stand. Please refer to "Stand Instruction"
(page 8).
2.2. Remove the protective film covering the LCD screen.
2.3. Press to turn the unit on.
1. Power ON/OFF
2. UP
3. Play/Pause/OK
4. Right
5. Left
6. Down
7. Menu（Press & hold）/
Exit（Press）
1. SD/SDHC/MMC CARD
2. USB PORT
3. DC IN- for Power Adapter

4
3. Operating Instructions
3.1 Main Menu
Note: This frame will only recognize JPEG files.
3.2 Picture Mode
The memory card interface will automatically
display approximately 5 seconds after the frame
turns on.
BUTTON USE: There are two methods for
pressing the control buttons; Press – (press &
release) and Press & Hold - press and hold for
one-two seconds before releasing.
This unit supports SD/SDHC/MMC and USB 2.0.
Simply insert a memory card or USB drive and
the frame will automatically play a slideshow.
Press MENU twice to access Photo, File,
Calendar and Setup.
Slideshow Mode:
Press MENU 2x to choose between MEMORY,
SDMMC, or USB. In the main menu select Photo,
and then press to start the slide show (there
are 6 random picture transitions.)
Single Picture Display:
From the Photo main screen press:
to select desired photo, then press
to display the picture.
Changing SLIDE MODE:
In the setup menu, choose SLIDE MODE.Press
to select between single, triple, or four
window displays. Press to confirm. This will
randomly display up to 4 pictures at a time.

5
3.3 Copy & Delete Function
Note: System will hint “Memory Full” if remaining built-in memory size is not enough to store the photo."
!
4. File
Select File, and then press to access the file
interface. You can browse all the picture files on
the memory card or the built-in memory.
In six-picture mode, use to select the
picture you want to delete, then press & hold
MENU to enter the delete interface, press to
confirm.
To copy a photo from a SD or USB drive to the
photo frame’s memory; Pause a single picture,
next, press & hold MENU, then use to
select “Save Picture”. Press to save
displayed picture to the digital photo frame’s
memory. NOTE: The memory will only hold 3-4
photo images.
Use to select the file you want to delete,
then press & hold MENU to enter the delete
interface, press to confirm.

6
5. Calendar
6. Setup
6.1 Language: Default Language: English (French & Spanish available)
6.2 Slide Mode: Single, triple, or four picture display.
6.3 Slide Speed: 3/5/15/30seconds, 1/5/15/30minutes and 1hour
6.4 Photo Effect: color, mono, sepia
6.5 Slide Effect:
Random, Split Horizontal in, Split Horizontal out, Jalousie, Split Vertical in, Split Vertical out, Radiation,
Surround, Fade, Right refresh, Next refresh, Pan On, Roll from down to up, Roll from up to down, Brick
6.6 Photo Mode: Auto, Optimal, Full
6.7 Display
Contrast: Press to select. Use to select from 00 (lowest) to 40 (highest).
Brightness: Press to select. Use to select from 00 (lowest) to 40 (highest).
Saturation: Press to select. Use to select from 00 (lowest) to 40 (highest).
Tint: Press to select. Use to select from 00 (lowest) to 40 (highest).
6.9 Set Time/Date: Press , choose setup items with as follows: Year, Month, Day, Hour,
Minute, Second, press , use to set, Press Save Time to confirm.
6.10 Set Time Format: 12/24, Press , select with , press , then use to set, press
to confirm.
6.11 Format Built-in Memory:
Press Setup from the main menu, then press
to access the Setup interface. Use to
select the item you want to set up. Press to
show the sub-menu and select with , then
press to enter the sub-menu item.
Select Calendar from the main menu, press
to enter, use to select the date you
want to view.

7
Press ,use !" to select or unselect to format the built-in memory.
6.12 Reset Setting: Press to default values.
Press , use !" to select or unselect to reset all settings to default values, press to confirm.
6.13 Exit: Press to exit setup interface.
7. Stand Instructions
Extend leg from slot on the back of the photo frame. Rotate the leg to choose a vertical or horizontal
position.NOTE: Please refer to the illustration shown below.
8. Technical Specifications
!Adapter:
Input: AC 100-240V~50/60HZ 350mA
Output: DC 5V/1A
!Picture Format: JPEG
!Memory Cards: SD/SDHC/MMC
!USB connection: USB 2.0 Host
!Screen Parameter:
Resolution: 480X234
Contrast: 400:1
Aspect Ratio: 16:9
9. Troubleshooting Guide
!No power:
Verify the power cord is seated firmly both in the unit and in electrical outlet.
!Can not read the CARD or USB:
Confirm whether the memory card isn’t blank or corrupt.
!Can not play the file:
Make sure the photos on your memory device are JPEG files.
!Display too bright or too dark:
Adjust the brightness and/or contrast in the setup menu.

8
!The color is light or no color:
Adjust color and contrast settings in the setup menu.
LIMITED 90-DAY WARRANTY
We warrant this product to be free from defects in material and workmanship under normal use for a
ninety-day period from the original date of purchase from an authorized ATAK dealer. We will repair or
replace the unit free of charge should it become defective under this warranty, providing you, the
original purchaser, submit proof of purchase (sales slip) along with the unit and all accessories.
During the ninety-day period from the original purchase date, we will service or exchange the unit at
no charge. To obtain warranty service or replacement within the ninety-day warranty period, please
return the product and all accessories to the original place of purchase.
For technical support, the ATAK Technical Support Center is available 24-hours a day, 7-days a week
for technical assistance or troubleshooting. Contact us by phone by calling 1-800-936-1168.
This warranty does not cover any product which has been subject to damage due to an act of nature,
misuse, neglect, accident, abuse, commercial use, or modification of, or to, any part of the product,
including the antenna. Damage to any external media such as DVD, CD, SD, USB, and/or other
memory devices are not covered nor is the cost incurred in shipping the unit for warranty repair. Under
no circumstances shall ATAK be liable for any loss (direct, indirect, incidental, foreseen, unforeseen,
special or consequential) or for any damage arising out of, or in connection with, the use of this
product.
UNDER NO CIRCUMSTANCES WILL ATAK BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
This warranty does not cover re-manufactured units, or product sold 'As Is'.
This warranty is valid only to the original purchaser of the Product in the United States, Canada, and
Mexico and grants specific legal rights.