Athena BATHROOMS CASSINI 1500 User manual

athena.co.nz
JULY 2023
FREESTANDING BATHS
INSTALLATION GUIDE
IMPORTANT
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE INSTALLATION.
INSPECT YOUR PRODUCT PRIOR TO INSTALLING. IF THERE IS ANY DAMAGE OR PARTS
MISSING, DO NOT INSTALL. CONTACT THE MERCHANT FROM WHERE YOU PURCHASED.
ATHENA BATHROOMS
FREESTANDING BATH
INSTALLATION GUIDE
CASSINI 1500
CASSINI 1690
RIADA 1500
RIADA 1700

athena.co.nz
JULY 2023
FREESTANDING BATHS
INSTALLATION GUIDE
FOR OPTIMUM RESULTS, THE BATHROOM FLOOR SHOULD BE LEVEL.
1. Our freestanding baths are supplied on integrated steel supports with adjustable feet.
Place the bath in the desired position.
NOTE: waste placement and plumbing requirements should have been
determined and prepared by this stage; consult with a licensed tradesperson to
ensure this is done correctly.
Once in the desired position, adjust the bath feet so that the bath’s acrylic surround is
touching the floor.
2. Using a spirit level, check to ensure the top edge of the bath is level along its length
and across its width. If necessary, use the levelling feet to adjust.
NOTE: adjusting the feet may cause the acrylic surround to lift off the floor.
UNDERSIDE OF BATH
ADJUSTABLE FEET

athena.co.nz
JULY 2023
FREESTANDING BATHS
INSTALLATION GUIDE
3. Connect the waste and lower the bath into position.
4. As an option, once the bath is in its final position, the acrylic surround may be sealed
to the floor using a sanitary grade silicone.
Masking the surround and floor will ensure a neat finish.
NOTE: Make sure bath is flush to floor before silicone is applied.
Allow time for silicone to set before use.