Atlantic Furniture COLUMBIA User manual

ASSEMBLY INSTRUCTIONSASSEMBLY INSTRUCTIONS
Before assembling your Columbia Crib, please read through these instructions carefully.
Thank you for choosing our new Convertible Crib.
This practical Crib design can be used as a baby’s crib, a toddler bed and then will convert to a full sized bed.
Familiarise yourself with the different parts before starting assembly.
Assembly is to be performed by qualified individuals who have experience with tools and metal fasteners.
Please save these instructions in plastic pouch attached to metal spring for future reference.
COLUMBIA CRIB
Assembling by Adult
Allen Key Provided
In Hardware Kit
Atlantic Furniture Inc.
655 Page Boulevard Springfield MA, USA 01104 / PH: 413-747-2900 / FAX : [phone]
Page1of6COLUMBIA CRIB 07172007
READY
BEFORE STARTING ASSEMBLY, READ AND UNDERSTAND ALL DIRECTIONS.
ALL NECESSARY HARDWARE AND TOOLS ARE INCLUDED IN THE HARDWARE KIT.
FULL SIZE BED
In Hardware Kit
DAY BED
TODDLER BED
CRIB

PARTS LIST
COLUMBIA CRIB
02
05
01
02
03
04
05
06
07
08
HARDWARE
HEADBOARD
FOOTBOARD
LEFT SIDE PANEL
RIGHT SIDE PANEL
GUARD RAIL
METAL SPRING
BED RAILS ( Packaged Separately )
07
LABEL
STATING ITEM NUMBER
AND MANUFACTURER
Page2of6COLUMBIA CRIB
01
06
08
03
04
07172007

A
B
C
1
2
3
JCB M6 X 50mm( 2 ”) - 8 pcs
JCB M6 X 100mm( 4”) - 2 pcs
( Actual Size )
JCB M6 X 15mm ( 5/8” )+ Split Washer-4set
Fix Side Panel to Headboard,Footboard For Side Panel and Stretcher
Fix Guard Rail / Stretcher to Footboard Leg
Fix Spring to Side Panel
BEFORE ASSEMBLY
( NOTED WHEN SHOWN ACTUAL SIZE )
HARDWARE
D
E
( Actual Size )
10 x 40mm Wooden Dowel - 8 pcs
Allen Key-1pcs
UNPACK HARDWARE AND PARTS AND COMPARE WITH LIST TO BE SURE YOU HAVE EVERYTHING YOU NEED.
PLACE EACH SCREW OR BOLT ON THE DIAGRAM OF THE ITEM THAT IS SKETCHED ACTUAL SIZE. BE SURE TO
USE THE PROPER SIZE,AS INSTRUCTED IN THE ASSEMBLY INSTRUCTIONS.
IF YOU ARE MISSING ANY PARTS, PLEASE CONTACT YOUR ATLANTIC FURNITURE DEALER OR ATLANTIC
FURNITURE 655 PAGE BOULEVARD SPRINGFIELD MA USA 01104,800-955-3726 OR CONTACT US BY EMAIL
[email protected] BE SURE TO INCLUDE YOUR ITEM CRIB IDENTIFICATION NUMBER IN YOUR EMAIL.
THE ID NUMBER CAN BE FOUND LOCATED ON THE INSIDE OF THE SIDE PANEL. BE SURE TO NEVER USE
SUBSTITUTE PARTS.
STEP 1
Insert Wooden Dowel(D),
into the receiving hole in each end of Side Panels ( 04 )( 05 ) as shown.
( Actual Size )
( Actual Size )
Page3of6
D
Assembling by Adult
Wooden Dowel
10 X 40mm
D
D
D
Locator hole will
receive(D)
COLUMBIA CRIB
04
07172007

STEP 2
STEP 3
Page4of6
02
Attach the Side Panels ( 04 )( 05 ) to the Headboard ( 02 ) and Footboard ( 03 ),using JCB M6 X 50mm ( A ).
Tighten with the Allen Key( E ).
IMPORTANT : TIGHTEN ALL BOLTS SECURELY DO NOT OVER TIGHTEN
Assembling by Adult Allen Key
E
JCB M6X50mm(2”)
A
JCB M6X15mm(5/8”)
Split Washer
C
Assembling by Adult Allen Key
E
NOTE : Metal bracket must be up.
C
C
C
C
07
4 position choices
Upper Middle
Lower Middle
E
4 position choices
C
Highest Position
Lowest Position
Install the Metal Spring ( 07 ) to Columbia Crib ,using JCB M6X15mm and Split Washer(C).
Tighten with the Allen Key(E).
IMPORTANT : TIGHTEN ALL BOLTS SECURELY DO NOT OVER TIGHTEN
AE
COLUMBIA CRIB
03
A
A
A
E
A
05
04
07172007
Locator hole will
receive ( A )

STEP 4
Page5of6
ASSEMBLED CRIB
WARNING
!
ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 in (690 mm)
IN WIDTH, BY 51 5/8 in (1310mm) IN LENGTH, AND AT LEAST 4 in (100mm)
IN THICKNESS, BUT NOT EXCEEDING 6 in (150mm).
Your Columbia Crib is now ready for use.
It is important that you recheck all bolts making sure they are tight
and that all parts are secure before use and periodically to ensure safety.
WARNING
!
When use as a Crib has been completed,you have the option to convert the Crib to a Toddler Bed.
Remove Footboard ( 03 ) that is attached to front posts ( left + right). Install Toddler
Guard Rail ( 06 ),use Wood Dowel(D),JCBM6X100mm(B)asshown.
Assembling by Adult
JCB M6 X 100mm
(4”)
B
Allen Key
E
D
Wooden Dowel
10 X 40mm
BACK VIEW
D
Tighten with the Allen Key(E).
B
Locator hole will
receive(D)
COLUMBIA CRIB
Conversion to a Toddler Bed / Day Bed
B
E06
WARNING
Spring ( 07 ) must
be installed in lowest
position as shown.
!
06
Remove Guardrail ( 06 ) that is attached to Stretcher
as shown.
06
Day Bed
Toddler Bed
07172007

Disassemble crib by removing Spring ( 07 ), Also remove Side Rails ( 04 )( 05 ) from Headboard/ Footboard.
Install The Headboard and Footboard to Bed Rail with Bed Hook ( 08 ) as shown.
Conversion to a Full Size Bed
08
FOR SLAT KIT ASSEMBLY follow assembly instructions included with slat kit.
Page6of6
08
After you finish assembling your crib, be sure all allen bolts have been tightened
securely. You must check all bolts periodically and re-tighten as necessary.
Periodically inspect crib for damaged hardware, loose joints or splintered edges.
use crib if parts are damaged or broken! Contact your Atlantic Crib
dealer or Atlantic Furniture at ( 413 ) 747-2900, or email
If you are having problems contacting us, you may also visit our website at
Please be sure to have your model identification number
written down before you make contact. The model number can be found on a
white label located on the inside of your Crib on the side panel.
DO NOT
NEVER
SUBSTITUTE PARTS OR MAKE
[email protected]
www.atlanticframe.com
ALTERATIONS TO YOUR CRIB.
MAINTENANCE OF YOUR ATLANTIC CONVERTIBLE CRIB :
ASSEMBLING THE YOUTH TODDLER BED :
When a child reaches 35 inches in height, they should be placed in a youth or
toddler bed. The minimum age for a child using a toddler bed shall be not less
than 15 months and the maximum weight shall be no greater than 50lb. If you
choose to convert this crib to a toddler bed you must use Stretcher / Guard Rail
(06).
COLUMBIA CRIB 07172007