Atlona AT-SDI10SR-LC User manual

http://www.atlona.com/
Atlona HD/SD-SDI over Optical Fiber Extender
User Manual
A T -SDI10SR-LC

1
Safety and Notice
Atlona A T -SDI10SR-LC HD/SD-SDI over Optical Fiber Extender has been tested
for conformance to safety regulations and requirements, and has been certified for
international use. However, like all electronic equipments, A T -SDI10SR-LC should be
used with care. Please read and follow the safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep away the objects that might damage the device and assure that the placement
of this unit is on a stable surface.
Use only the power adapter, power cords and connection cables designed for this
unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.

2
Features
Enable transmission of digital video signal over optic fiber
Automatic cable EQ up to 300m/1000ft at SD-SDI or 150m/500ft for HD-SDI
Standard LC-type fiber optic connector
Supports following protocols:
- SMPTE 259M (270Mbps)
-SMPTE 259M (360Mbps)
-SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
-DVB ASI (270Mbps)
Automatic reclocked
HD/SDI Input signal detection LED
Atlona A T -SDI10SR-LC is an ideal and economic solution designed for
transmission of multi-rate SDI video, with embedded audio and metadata over a
multi-mode optical fiber cable.
The transmitter module receives one HD-SDI electrical input, perfectly
converts SMPTE 292M, SMPTE 259M, or DVB-ASI electrical SDI signal to
multi-mode optic SDI signals. The receiver module receives optical signal from input
LC connector, and then perfectly converts it to electrical SDI signal. Both transmitter
and receiver provide equalizing and re-clocking at input unit in order to re-construct
the signal for consistent quality. The AT-SDI10SR-LC is perfect for today’s
broadcast applications, including video production, video editing, studio to studio
and studio to CATV head end. In addition, since transmission of content is inherently
secure and immune to outside interference, fiber applications are favored in
government, military, and medical environments.
Introduction

3
Package Contents
Technical Specifications
Input connector:
Transmitter: 1x 75ΩBNC SDI
Receiver: 1x Optical LC
Output connector:
Transmitter: 1x Optical LC
Receiver: 1x 75ΩBNC SDI
SDI signal type: SMPTE-292M, SMPTE-259M, DVB-ASI
Fiber optic: Wavelength: 850 nm
Type: Multi-mode
Optical power Better than -7.5 dBm
Rise/fall <500 pS
Extinction ratio 8-10
Overshoot < 10%
Jitter < 0.2 UI
Data rates: 1485 / 1483 / 270 Mbps
Cable equalization: up to 300m/1000ft for 270 Mbps; up to 150m/500ft for
1.485 Gbps
– Automatic detection: 143Mbps / 270Mbps / 1.483Gbps / 1.485Gbps
– Automatic bypass: 177Mbps / 360Mbps / 540Mbps
Power supply: 5V 4A DC
Operation temperature: 0°C~55°C / 32°F~131°F
Dimensions: 105mm x 80mm x 25mm / 4.1”x3.2”x1” (L x W x H)
Weight: 324g / 11.4oz
1x AT-SDI10SR-LC (Transmitter + Receiver)
2x 5V 4A DC power adapter
1x User Manual
1x User manual
Remote Control (optional)

4
Transmitter
Receiver
Hardware Installation
Installation
Rear View
Front View
BNC Input: Plug in coaxial cable here
LC Output: Plug in optical fiber from the left
Rear View
Front View
LC Input: Plug in optical fiber from the
right
LC Output: Plug in coaxial cable here
Signal Detect
Signal Detect

5
Atlona warrants the A T -SDI10SR-LC HD/SD-SDI over Optical Fiber Extender to
be free from defects in the material and workmanship for 1 year from the date of
purchase from Atlona or an authorized dealer. Should this product fail to be in good
working order within 1 year warranty period,Atlona, at its option, repair or replace the unit,
provided that the unit has not been subjected to accident, disaster, abuse or any
unauthorized modifications including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for 90 days from the day of reshipment to the buyer. If the unit is delivered by mail,
customers agree to insure the unit or assume the risk of loss or damage in transit. Under
no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or fitness or merchantability for any particular
purpose, all of which are expressly disclaimed.
The content of this manual has been carefully checked and is believed to be
accurate. However, Atlona assumes no responsibility for any inaccuracies that may be
contained in this manual. Atlona will NOT be liable for direct, indirect, incidental, special,
or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. Also, the technical information contained
herein regarding the A T -SDI10SR-LC features and specifications is subject to change
without further notice.
Limited Warranty