Atoll AM200 User manual

C ONNECTING :
Rear view of appliance :
1) Ampli IN (double pair)
2) General power plug and switch (with internal fuse)
3) Left channel Output
4) Right channel Output
D ETAILS OF FUNCTIONS :
Front view of Amplifier :
5) Power indicator led.
A DVISES :
-To optimise the performances of your amplifier, you should switch it on
at least half an hour before any listening, the time for power stage to
reach their ideal working temperature. Between two utilisation, it's better
to use the stand-by position, so that the power stages remains at their
optimal temperatures.
-We advise you to use good wires to link with the other elements (CD
player, Loudspeakers…). Don't hesitate to take advise from your dealer.
-Your Amplifier is equipped with a temporised switch on. A relay protect
loudspeakers on output power stage from over-voltage.
MODE BRIDGE MONO
To transform your Power Amplifier from Stereo to mono, you have to push the
switch (a) placed inside the appliance as shown below:
Careful: be sure that your
amplifier is unplugged and
that no other appliance is
plug in during this
operation.
E.C. M ARKING :
E.C. marking certified the conformity with low tension directive
73/23/CEE, directive CEM 89/336/CEE and national transpositions.
G UARANTEE :
The guarantee is two years long from date of purchase. We recommend
you to ask your dealer to fill the guarantee and to conserve it. The
guarantee is only available for appliance which have been use correctly.
C LEANING :
Before any cleaning, switch off your amplifier (6). Use a soft and dry rag to
clean up the appliance. Never use acetone, white-spirit, ammoniac, or any
kind of product containing abrasive agent. Never try to clean up inside the
appliance.
5
(a
)
(a)
4
1
2
3

C ONNECTING :
(Configuration : 1 Preamplifier & 2 bridged mono amplifier)
TECHNICAL FACTS AM200
Power Wrms / ch. / 8 ohms (230v)
Power Wrms / ch. / 4 ohms (230v)
Alimentation :
Total of capacitors :
Number of Inputs :
Input Impedance :
Sensitivity :
Rate Signal/Noise :
Distortion at 1kHz :
Frequency Response :
Rise Time :
Dimensions :
Weight :
120 W
200 W
660 VA
62 000 µF
2X2
220 kohms
1,8 V
100 dB
0,005%
5Hz-200kHz
1,5µs
440*90*280mm
12 Kg
ATOLL ELECTRONIQUE
®
is a French Company who conceive,
manufacture and commercialise all its products.
You have just bought an amplifier with exceptional audiophile
performance. We really thank you for your confidence in our
products. To get the best part of your amplifier, please read
carefully this manual.
C AUTIONS :
- Put your amplifier in a dry and well ventilated place, far from
source of heat;
- Do not put something on your amplifier;
- Do not make any plug in when the amplifier is on;
- Avoid any short-cut;
- Respect polarity + & - and switch left & right;
- Do not plug in two speakers in parallel on the same output.
You will find enclosed :
- a power amplifier AM200 ;
- one powerlead;
- this manual with the certificate of guarantee.
L
R
DO NOT OPEN
NE PAS OUVRIR
SERIAL NUMBER
NUMERO DESERIE
PREAMPLI
AMPLI 1
AMPLI 2
+ - + -
AUX . CD TUNER DVD . PRE OUT
L
R
POWER
DO NOT
OPEN
NE PAS
OUVRIR
SERIAL NUMBER
NUMERO DESERIE
+
RIGHT
-
+
LEFT
-
AUX . CD TUNER DVD . PRE OUT
L
R
+
DO NOT
OPEN
NE PAS
OUVRIR
SERIAL NUMBER
NUMERO DESERIE
+
RIGHT
-
PRE-OUT
+
LEFT
-


G U A R A N T E E
To present to your dealer with the invoice when returning back the
appliance:
Model AM200
ATOLL ELECTRONIQUE
®
Bd des Merisiers
50370 BRECEY
FRANCE
Dealer Stamp
Date of purchase :
Place of purchase :
Buyer signature :
O WNER ’ S M ANUAL
Stereo Power Amplifier
AM200
E L E C T R O N I Q U E