Atomberg Ozeo User manual

OZEO®
ATOMBERG TECHNOLOGIES PVT LTD
Corporate office: Rupa Solitaire, Office No. 1205
Millenium Business Park, Mahape, Navi Mumbai 400 710.
Manufacturing unit: Plot No D-130 A & B, TTC Industrial Area
Shirawane, Navi Mumbai 400 706.
Remote key Function Description LED status
Power ON /OFF Switches ON the fan LED fades OFF
Switches OFF the fan,
LED fades OFF slowly
1-5 Fan speed Gradual change of LED fades OFF
control speed from low to high
B Boost mode Boost mode speed LED fades OFF
Timer OFF Timer/
•
Fan automatically switches LED blinks
Wakeup OFF/ ON after the set hours
Timer1 - 1 time
Timer (1,2,3 & 6 Hrs).
•
When timer Timer2 - 2 times
key is pressed for first time, Timer3 - 3 times
timer set for 1Hr.
•
If timer for Timer6 - 6 times
1 Hr is already set and timer Timer Disable - LED
key is pressed, then timer is fades OFF slowly
set for 2 Hr. Similarly, 3 and
6 Hr will set.
•
When timer for
6 Hr is already set and timer
key is pressed, it will disable
Timer.
Sleep Reduce speed
•
When sleep key is pressed Sleep Mode Enable -
of fan by 1 for
first time, sleep mode is LED fades OFF
enabled. Sleep Mode operates Sleep Mode Disable -
for 4 Hr duration. After 2 Hr LED fades OFF slowly
time duration speed of fan is
reduced by 1 and after next
2 Hr time duration speed is
further reduced by 1. Afterwards,
the fan continues to run on a
reduced constant speed. Fan
speed will not reduce below
speed 1.
•
If sleep mode is already set
and sleep key is pressed, it will
disable sleep mode.
LED LED mode When LED key is pressed for LED mode enable - LED
first time, it will turn ON LED. glows continuously
If LED is ON and LED key is LED mode disable -
pressed, it will turn OFF LED. LED OFF
Problem Cause Solution
Fan is Nut holding motor Securely fasten the nut and bolts along with
wobbling shaft and the down washers as per the instructions provided in this
rod is loose manual.
Nut holding down Securely fasten the nut and bolts along with
rod and shackle kit washers as per the instructions provided in this
is loose manual.
Screws in shackle kit Securely fasten the nut and bolts along with
and the ceiling hook washers as per the instructions provided in this
are loose manual.
Fan blades are not
A common mistake is fixing the blade in the
seated properly on reverse direction. Please set it right and securely
the motor fasten the screws.
Fan blades are out Make sure that the blades are not bent during
of balance
cleaning. Also, interchanging them helps balance
the blades.
Restart/ Regulator not Make sure the regulator is
eliminated from the
speed bypassed
connection.
variation
Blades have wrong Check the sweep of blades with the fan sweep
sweep before assembling.
Problem Cause Solution
Fan does Fuse down / MCB Check fuse of the MCB on the mains.
not start shut off
Loose wire connection Check the wire connection and restore the
to fan or to the switch connection
on the panel
Fan still does not start Please contact the service number provided.
Regulator is connected
It is recommended that the regulator should not
to the fan be connected to this ceiling fan and it is instead
controlled using the remote provided with it.
Fan Bearing inside This ceiling fan is designed to be longlasting.
making the housing However, after many years of use the bearing
noise has problems may wear off and may need to be replaced.
Fan blades are not
Make sure the blades are properly fastened to the
seated properly on body. Loose connection may cause accidents.
the motor
Shackle kit rattling Make sure that the screws and nuts are securely
fastened along with washer provided.
Canopy is touching Make sure that the canopy and the wire that
the body connects the fan are not touching the body of
the motor.
Canopy is touching Make sure that the canopy is not touching the
the ceiling ceiling.
Note: Sleep mode will not work if fan is off.
SLEEP mode adds smart comfort, as the temperature drops over the night and if
you wish to auto-reduce the speed.
With TIMER mode, you can switch OFF/ON the fan automatically after set hours to
further save energy.
DO NOT use the fan regulator as the fan is operated using a remote.
Eliminate the regulator by using a direct connection from the switch to the fan.
WARNING
TROUBLESHOOTING
Your ceiling fan is designed to be longlasting with a strong body and well-tested
electronics, however if any problem arises, please refer to the guidelines shared.
Please contact a local electrician or service engineer if you need any help.
MAINTENANCE
Periodic cleaning of your ceiling fan is the only maintenance needed.
When cleaning, use only a soft lint-free cloth or brush to avoid scratching the
smooth paint finish. You can use moist cloth to remove stains if any. However, do
not use water directly. Abrasive cleaning agents are not required and should be
avoided to prevent damage to the outer finishing.
WARNING
Do not use water when cleaning your ceiling fan. It could damage the motor by
causing short-circuit and create the possibility of an electrical shock.
Do not bend the blades while cleaning. A bend in the blade may result in unstable
fixing and affect the air delivery.
INSTRUCTION
MANUAL
IMPORTANT NOTE:
Read this manual carefully before installing or
operating your new Atomberg OZEO®Ceiling Fan.
Ensure you save this manual for future reference.
290mm X 210mm: same size artwork
B
O
O
S
T
,
S
L
E
E
P
&
T
I
M
E
R
M
O
D
E
R
E
M
O
T
E
W
I
T
H

SAFETY INSTRUCTIONS
Be careful of the fan and blades while cleaning, painting, or working near the fan.
Always turn off the power to the ceiling fan before servicing.
Do not put your hand or any other objects near the fan blades while the fan is running.
Do not modify the blade design to change the air flow.
INSTALLATION
Assembly:
Mandatory Step:
Bypass or eliminate the regulator from
the connection before installing on Atomberg
fan for optimal performance
BIG ENERGY SAVINGS
Atomberg is India's most energy-efficient ceiling fan. A super-efficient BLDC motor
technology is used, which consumes very little energy. Atomberg fans consumes
just 1/3rd of the power used by ordinary induction fans. Ordinary induction fans
run on 75watts, whereas Atomberg fans run on just 28watt at full speed.
There is huge saving potential for households, and institutions such as hospitals,
colleges, schools and commercial spaces.
Shackle kit
Top canopy
Down rod
Bottom canopy
Blade
Shaft with motor
The picture shown above depicts the exact order of placement of various parts.
Step 1.
Motor
Carefully remove the motor from the box and
keep it on soft padding to prevent it from getting
scratched.
Step 2.
Ceiling
Hook
Insert the canopy into the shaft and securely,
attach the shackle to the hanger or ceiling
hook using the screws provided with the package.
Fasten the nut, and make sure that you fit the
safety nut, washer and the R-pin to prevent slipping.
Adjust the top canopy so that it covers both the
assembly and the connection.
Step 3.
Align the holes on the blade shank with the motor
holes. Securely fasten the blades with the screws
and washer provided.
HOW TO HANG THE FAN
Spring
washer
R pin
Nut
Hex
screw
Step 4.
Insert the screw to assemble the shaft and the down rod. Insert the washer, nut and
R-Pin in the sequence depicted in the illustration below. Pull down the canopy to
cover the PCB box.
ELECTRICAL WIRING INSTRUCTIONS
Ceiling
At least 7 feet
At least 1 foot
Floor
Step 5.
Step 6.
Make the correct wire connections to
operationalise the fan.
Adjust the canopy as required
Color codes of the wires may vary from region to
region. Please check your state or country notifications
regarding the same.
Dear Customer,
Congratulations on the purchase of ATOMBERG'S super-efficient OZEO
®
ceiling fan.
Please read this guide before using this product. It would also be advisable to
store this guide safely for future reference.
WARNING
Do not install or use fan if any part is damaged or missing.
This product is designed to be used only with those parts or accessories supplied
with this product and/or any accessories designed specially for use with this
product by Atomberg. Any such use of other parts or accessories may turn the
product warranty null and void, and may result in personal injury or property
damage as well.
WARNING
MOTOR 3 ALUMINIUM
BLADES
DOWN
ROD
SHACKLE
KIT
MANUALBATTERY WARRANTY
CARD
REGISTRATION
CARD
REMOTE
PACKAGE CONTENTS
Observe the following to reduce the risk of fire, electric shock or injury:
Only use this unit in the manner intended by Atomberg. If you have any
questions regarding the product, please contact Atomberg.
Before servicing or cleaning, switch off the main power panel and switch.
Wiring of the fan must be done only by a qualified and certified electrician.
WARNING
If the blades are not secured properly with the screws and the washer, it may
cause injury during operation. Also, an imbalanced fan may cause damage to
the motor and reduce the lifetime of the fan.
Any damage caused by incorrect installation and wrong practices followed while
connecting the fan are not covered under the warranty terms. Please check the
warranty terms in detail.
Do not turn on the fan until the blades are securely fastened to the ceiling fan.
The fan blade must be hung with at least 1 foot of
clearance from the ceiling for optimal performance
and safety.
Any object next to the fan must be at least 2 feet
away from the tip of the fan blade to reduce chances
of risk or injury.
The fan must be hung with at least 7 feet of
clearance from the floor to the blades.
WARNING
WARNING
USING YOUR CEILING FAN
Congratulations! You have successfully installed your new ceiling fan using the
instructions provided in this guide.
1 Restore the electrical power.
2
Power 'ON' the ceiling fan using switch on the panel in the room. The LED
indicator flashes ‘ON’ when power supply is restored.
3 Use your remote to operate the ceiling fan.
4 If you are leaving the room or facility for a long duration or on holiday, then
power 'OFF' the ceiling fan using the switch on the panel.
The performance of the fan gets affected if the regulator is not bypassed, and
may lead to speed variations, restarting or low speed. Eliminate regulators by
using a direct connection from the switch to the fan.
Any connection to wires must be securely sealed using electrical insulation tape
to prevent electric shock or fire hazard.
Avoid pinching of wires between the shackle kit, down rod and ceiling hook
assembly to prevent electric shock or fire hazard.
WARNING
Longlasting AAA batteries are used in the remote
HOW TO USE YOUR REMOTE
Product must be used along with the speed control unit/remote provided with the
fan. Do not use standard regulator used for ordinary fans.
Down rod
2
CANOPIES
REGISTRATION
CARD
YEAR
1
EXTENDED
WARRANTY
TOGGLE FEATURE
It’s as easy as flicking a switch
Atomberg fans have been programmed to respond to normal fan switches, so
that they can be controlled with ease without the remote, app or voice control.
Fan Speed 1: Toggle off and on 2 Times. Fan Speed 4: Toggle off and on 5 Times.
Fan Speed 2: Toggle off and on 3 Times. Fan Speed 5: Toggle off and on 6 Times.
Fan Speed 3: Toggle off and on 4 Times. Boost Mode: Toggle off and on 7 Times.
FEATURES
India's most energy-efficient OZEO
®
ceiling fan • More than 65% energy saving as
compared to an ordinary fan • Highest service value (air delivery/power consumed)
in India • Runs 3 times longer on inverter resulting in longer battery runtime • Smart
sensorless algorithm for greater reliability • No heating of fan even after long hours of
runtime, resulting in an extra-long life • Consistent speed even at low voltages • Easy
speed controls using a smart remote • LED indications for easy remote use • TIMER
feature automatically switches OFF the fan when the fan is in running state and
switches ON the fan when the fan is in the OFF state. • SLEEP will work for only 4 hours
of Sleep keypress. For the first 2 hour, it will reduce speed by 1, and then after the
next 2 hours, it will be reduced by 1 speed • Full copper motor and double ball-bearing
for better stability and longer life • Aluminum body and blade, resulting in zero rust
• Zinc-plated parts and accessories for rust-free life • Protective coating over
electronics for better resistance against moisture • All fans are tested for durability
in extreme conditions before shipping.
SPEED
CONTROL
BOOST
MODE
TIMER
MODE
SLEEP
MODE
The remote provided along with your
ceiling fan is ergonomically designed.
The soft controls on the remote are
longlasting.
LED
CONTROL
ON/OFF
CONTROL
“Not recommended for use in high humid areas" like Washroom, direct or indirect
exposure to water entries etc.