ATOMI Qi Wireless Alarm Clock User manual

Qi Wireless Alarm Clock
10W Wireless Charger +
Dual USB Pos + Alarm Clock
Date Code: 06/19
User Manual
Need assistance?
WE
CAN
HELP
DO NOT RETURN THIS
PRODUCT TO THE STORE
Call 1-800-757-1440
Mon-Fri 9:00 a.m. - 5:00 p.m. EST (US)
or email us at [e-mail]

Thankyou for purchasing
the atomi Qi Wireless Alarm Clock
Charge your smaphone with an ultra modern alarm clock
designed to hold and protect your device as it powers up.
The atomi Qi Wireless Alarm Clockfeatures Qi technology
that allows you to charge a compatible device quickly and
wirelessly through electromagnetic induction.
All you have to do is place any compatible device on the Qi
Wireless Alarm Clockto charge it.
NOTE: If a device is not Qi compatible, you will need a Qi receiver to charge the
device.
What’s Inside
1. Qi Wireless Alarm Clock
2. 5-foot Detachable Cable
Specifications
Qi Charge Pad Specifications:
Output: 10W
USB Specifications:
Input: 100-240V~50/60Hz 0.6A max
Each USB Output: 5V 2.4A max
Total USB Output Current: 2.4A max
Total: 22W Max
1
2
Place the device on the top center of your Qi Wireless
Alarm Clock. Charging will begin on contact.
Charging Your Wireless Device
Connect the wall plug to a wall outlet
and to the Qi Wireless Alarm Clock.

Steps
Press and hold the circle buon for 3 seconds
and the alarm hour will sta blinking.
Scroll wheel to adjust, press the circle buon
to confirm and move on to the next time to set.
In order, it will be: alarm hour, alarm minute,
clock hour, and clock minute.
Press circle buon to confirm the seings.
Screen returns back to normal mode if
no action is taken aer 15 seconds.
Alarm
Press the circle twice to turn OFF alarm.
Press the circle twice again to turn ON alarm.
The alarm icon indicates alarm setup is on.
At the set time, the alarm will sound for 1 minute
(60 seconds).
Press the circle buon once to turn OFF alarm.
The alarm will turn o automatically aer1 minute if
no buon is pressed.
Snooze
While the alarm is sounding, press the snooze buon to
temporarily silence the alarm for 5 minutes.
The alarm will repeat for1 minute aer 5 minutes of standby.
Screen Brightness
When the alarm is not ringing, press snooze to adjust screen
brightness (strong, middle &weak).
Press and hold the circle buon for 3 seconds
to set alarm and clock time.
The rotating scroll wheel adjusts alarm and time.
Alarm/clock time blinks while adjusting.
Seing Up Your Clock

For questions or concerns, email us at [e-mail]
Manufactured and marketed byAtomi Inc.
10 West 33rd St., New York, NY 10001
atomi™ is a trademarkof Atomi Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from the date of purchase
against defects in material and workmanship.
Safety Information
Taking care of your Qi Wireless Alarm Clockwill protect your
warranty coverage. Here is how to properly care for your
atomi Qi Wireless Alarm Clock:
• Keep it dry—any moisture, including humidity, can
corrode electronic circuits.
• Do not use your Qi Wireless Alarm Clockif it gets wet.
Wait until it dries.
• If the Qi Wireless Alarm Clock is damaged in any way, do
not use it.
• Keep it free from dust—dust can damage pas and
electronic components.
• Do not store in cold temperatures as moisture can form
inside the charger when it warms up to room
temperature.
• Do not modify the Qi Wireless Alarm Clock in anyway.
• Never drop, knock or shake the Qi Wireless Alarm Clock.
This could break internal circuit boards and mechanics.
• Always clean your Qi Wireless Alarm Clock with a so,
clean dry cloth.
Aention
Pas of the Qi Wireless Alarm Clock are magnetized.
Do not put credit cards or other magnetic storage devices
near the Qi Wireless Alarm Clock as information may be
erased.
Caution
If you have an implanted medical device, including
pacemaker, implanted cardioveer defibrillator, etc., you
should:
• Keep the Qi Wireless Alarm Clock more than 6 inches
away from the medical device.
• Unplug the Qi Wireless Alarm Clock if you think it is
inteering with your medical device.
• Follow the directions that came with your medical
device.