
FCC Class B digital device notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
⊲
Reorient or relocate the receiving antenna.
⊲
Increase the separation between the equipment and receiver.
⊲
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
⊲
Consult the dealer or an experienced radio/TV technician for help.
FCC ID: SIM-2538 IC: 5466A-2538
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003.
DATE OF MANUFACTURE
The serial number is found on the back of the Movesense Module.
The serial number is always 12 characters long: YYWWXXXXXXXX.
In the serial number, the first two digits (YY) are the year and the following two digits
(WW) are the week within the year when the device was manufactured.
DISPOSAL
Please dispose of the device in an appropriate way, treating it as electronic waste.
Do not throw it in the garbage. If you wish, you may return the device to your
nearest authorized Atomic dealer.
TRADEMARK
Atomic Connected, Atomic Skiing. its logos, and other Atomic and Suunto brand
trademarks and trade names are registered or unregistered trademarks of Atomic Austria
GmbH and Suunto Oy. All rights are reserved.
PATENT NOTICE
This product is protected by pending patent applications and their corresponding
national rights: USD 667,127, US 13/397,872, US 15/610,662, US 15/992,225, GB 2509339,
US 8,386,009, US 8,750,959, US 8,814,574, US 8,886,281, US 9,055,879, US 9,597,005,
US 9,861,291, US 9,993,162, A 50983/2018, A 50588/2017, A 50005/2018, A 50448/2018.
Additional patent applications have been filed.
COMPLIANCE
CE: Hereby, Atomic, declares that the radio equipment type OP184 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.atomic.com/en/certificates.
⊲
Weight: 24.0 g (0.85 oz); battery included
⊲
Dimensions: Height 49 mm (1.9 in) / Width 34 mm (1.3 in) / Thickness 17mm (0.7 in)
⊲
Operating temperature: -20° C to +60° C / -4° F to +140° F
⊲
Storage temperature: -30° C to +60° C / -22° F to +140° F
⊲
Water resistance: IPx7
⊲
Battery type: Lithium polymer (nominal capacity 215mAh)
⊲
Battery life: 100 hours
⊲
Transmission frequency: 2.4GHz (Bluetooth Smart)
⊲
Maximum radio-frequency power transmitted: 0 dBm
FCC / ISED REGULATORY NOTICES
Modification statement
Atomic has not approved any changes or modifications to this device by the user. Any
changes or modifications could void your authority or ability to operate the equipment,
and will void your warranty.
Atomic n’approuve aucune modification apportée à l’appareil par l’utilisateur, quelle
qu’en soit la nature. Tout changement ou modification peuvent annuler le droit
d’utilisation de l’appareil par l’utilisateur.
Interference statement (if it is not placed in the device)
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit
accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Wireless notice
This device complies with FCC/ISED radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102
of the ISED radio frequency (RF) Exposure rules. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
Le présent appareil est conforme à l‘exposition aux radiations FCC / ISED définies pour un
environnement non contrôlé et répond aux directives d‘exposition de la fréquence de la
FCC radiofréquence (RF) et RSS-102 de la fréquence radio (RF) ISED règles d‘exposition.
L‘émetteur ne doit pas être colocalisé ni fonctionner conjointement avec à autre antenne
ou autre émetteur.
ENEN
98