Atomrock DC120 User manual

Atomrock Camera Installaon Guide
DC120

Privacy and Support
To protect customer’s private informaon, Atomrock promises
to keep them confidenal, and will not disclose any informaon
to a third party without permission.
To learn more about privacy, please refer to our privacy policy
at: www.atomrock.com/privacy
To register, to get support, to obtain the latest product informa-
on, compliance informaon, and to download the latest
updates at:
www.atomrock.com/support
help.atomrock.com

In the box
Camera
3 Screws 3 Anchors Waterproof connector
Drilling guide

Before Installaon
1. Check your firewall and router for required Internet connecvity.
TCP/UDP port 443 needs to be opened for secured data transmission
with the cloud.
2. It is strongly recommended to use POE switch for Atomrock’s camera
product. Please check that your switch supports 802.3af POE standard.
3. You should already have an invitaon email, which was sent during
purchase, to acvate your Atomrock account. Please login and add the
camera with its serial number and its proper license.
4. Check to see that you have a Phillips screwdriver or power drill with
Phillips screwdriver bit.
Other items you may need
1. Drill bit
2. A ladder - please ensure safety first.
Installaon Help
Please refer to help website for more informaon about installaon:
help.atomrock.com

Start Installaon
2.Install the camera
Opening the camera’s shell, you
should see three holes on camera
base. Match the holes between the
camera base and the wall. Lock them
up with the screws and put the
camera’s shell back and lock it. For
weatherproof installaon, all three
connecons need to be weatherght.
Please use the weather sealing cap
and appropriate weather sealing tapes
on all joints.
1.Drill installaon point
Take the drilling guide and place it
on the wall or ceiling. Check
drilling points and carefully use
power drill to drill holes. Aer
drilling the holes, put the anchors
into those holes.

For more informaon or support, please visit our support website: help.atomrock.com
4. Access Enterprise Cloud UI
Go the Atomrock enterprise cloud
(cloud.atomrock.com) and login.
Check the camera status and
views. You can manually change
the camera’s direcon or angles
with the camera view.
Add license to enable cloud
recording and smart analysis
funcons here.
3. Connect to the Net
Connect your Ethernet cable from
your switch to the camera, and
check the instrucon light on the
Ethernet socket to make sure the
camera’s power is on.
! By default, Atomrock device acts
as DHCP client. Please check our
support site for documentaon
about deploy on network without
DHCP.
5.Your new Cloud-enabled surveillance system is ready to work!

Noce
This label indicates that this product should not be disposed of
with household waste. It should be deposited at an appropriate
facility to enable recovery and recycling. Please refer to informa-
on on how to recycle this product responsibly in your country.
WARNING: A WARNING indicates a potenal for property damage,
personal injury, or death.
WARNING: Do not operate your equipment with any cover(s)
removed.
WARNING: Use of controls, adjustments, procedures, connecons,
or signal types other than those specified in your documentaon
may result in exposure to shock, electrical hazards, and/or
mechanical hazards.