Audacity Odyssey User manual

USER MANUAL
Built in mic for cell
phone connectivity
High quality
stereo sound
Bluetooth
connectivity
Easily connects
to your device
Rechargeable battery
via USB
Up to 7 hours
battery life
Built in FM radio
function
USB drive or flash
card compatible

Turning ON the Speakers:
Press and Hold button for three seconds
and release. After a second the indicator light
will turn on to show the device is on.
Turning OFF the Speakers:
Press and Hold button for three seconds
and release. After a second the indicator light
will turn off and there will be an audible chime
to show the device is off.
Switching Modes:
When the speaker is turned ON, ‘Short Press’
the button to switch between Bluetooth /
FM Radio / AUX Input, Flash Card or USB
Changing the Volume:
• During playback: Press and Hold button
to increase the volume.
• During playback: Press and Hold button
to decrease the volume
Pausing Playback:
• During playback, ‘Short Press’ button.
Skipping Tracks/Stations:
For skipping tracks using Bluetooth
connection, AUX Input, Flash Card or USB:
• During playback, ‘Short Press’ button to
select the next song/track.
• During playback, ‘Short Press’ button to
select the previous song/track.
• During FM Radio function, ‘Short press’
the or buttons to select the
next/previous stations.
Cell Phone Call Features:
When connected to a Cell Phone via Bluetooth:
• To accept a call ‘Short Press’ button
• To hang up a call ‘Short Press’ button.
Charging the Battery:
Connect the speakers via the USB cable to a
USB compatible device, such as a computer.
• When charging, the light is red.
• Full charging takes around 4 hours.
• The battery life of the speakers will vary
each time depending on Mode selection
and Volume levels.
Bluetooth Connectivity:
If you want to use Bluetooth function, you
must rst connect your compatible device to
the Bluetooth Speakers. The default mode is
set to Bluetooth.
• To pair your device/cell phone, turn the
Bluetooth Speakers ON, then go to the
settings interface on your device and open
the Bluetooth settings. Under Bluetooth
devices you will nd ‘B6’. Select this to
connect (the speakers have no password)
The Bluetooth Speakers will give an audible
signal to conrm that the device has been
paired successfully.
FM Radio Function:
To use FM Radio function, you must rst tune
the Radio stations.
• First select the Radio Mode then ‘Short
Press’ the button. This will start the
scanning process. The scan will take around
one minute to complete.
• Once the scan is complete, you will be able
to skip stations by pressing the or
buttons.
Troubleshooting:
• Automatic shut down: Low battery, please
charge the speakers.
• Indicator light ashing: Low battery.
• Cannot play music via USB or Flash Card:
The MP3 les cannot be identied by the
speaker. Check and re-load the MP3 les on
to the USB or Flash Card.
• There is no sound: Check the volume
level is turned up on the speakers.
• No sound when connected to PC:
PC connection error, please select the
correct audio output interface of PC.
• Buttons not functioning: Turn speakers OFF
and ON to try again.
Technical Specications:
• Bluetooth Standard: 2.1 + EDR
• Transmission distance: 10 meters
• Output power: 3W+3W
• Frequency effect: 100Hz - 18KHz machine
speaker (40mm 4 3W)
• Input Power: Direct-current
DC5V 500-1500mm
• Maximum current consumption: 400mA
• Audio signal input interface:
Standard 3.5mm headphone jack (stereo)
Box Contents:
Bluetooth Speakers.
User Manual.
Audio/3.5mm jack Cable.
USB Connection/Charging cable.
Power / Mode Play / Pause / Accept Call / Hang Up
Next / Increase Volume Previous / Decrease Volume
Flash Card AUX Charging PortUSB