Motorola Sphere User manual

Sphere/Sphere+
Quick Start Guide
EN

MODELS:
SPHERE / SPHERE+
Frequency Band:
2.402 – 2.480 GHz
Maximum RF power:
6 dBm
Working temperature:
0°C~45°C
Product ID: SP003
Bluetooth ID:
D036169
FCC ID: VLJ-SP003
IC: 4522A-SP003
1. At a Glance
3
4
6
5
7
1
2
98

Mode (change between Bluetooth & Aux-in input)
1
2
3
4
5
6
7
8
9
Play/Pause
LED Indicator (Bluetooth)
Microphone
Volume Down/Last Track
Volume Up/Next Track
Charging Indicator (Headphones)
Aux-in Port
Power Port
Power switch
Aux-in
Status
Light
Charge Play/
Pause
Volume
Up
Volume
Down
(micro USB)
MIC

2. Pairing
1
1. Plug in power supply to the
speaker power port
2. Speaker will enter into pairing
mode automatically with LED
flashes blue and red.
3. Pair your phone with the
speaker
4. Select “Sphere” / “Sphere+”
from the list
2
1. Take out the headphones
from the speaker dock
2. The headphones will
enter into pairing mode
automatically with LED
flashes blue and red.
3. Pair your phone with the
headphone
4. Select “Sphere Headphones”
/ “Sphere+ Headphones”
from the list
3
• The pairing is now successful.
You may listen to the music
either from the speaker or the
headphones
3. Audio Transfer
You may enjoy seamless audio transfer when
you listen to music between the headphones
and speaker. Make sure your phone can
support simultaneously Bluetooth connection
with two Bluetooth devices by checking your
phone Bluetooth “paired list”. If both Speaker

and Headphones are shown “connected” from
the list, it means it is supported.
1

1. Place the headphones to the speaker
2. Music will stop playing from headphones and
it will be charged by the speaker. Make sure
the headphones is placed properly onto the
speaker dock, the LED will show orange when
it is successfully charging
3. Speaker will automatically connect with the
phone*
4. Press Play once, music will automatically play
from the speaker without the need of any
operation from your phone.
2

1. Take out the headphones from the speaker
2. Music will stop playing from the speaker
3. The headphones will automatically connect
with the phone*
4. Press Play once, music will automatically play
from the headphones without the need of any
operation from your phone.
* The reconnection time varies from phone to phone

4. Buttons Operation
Speaker & Headphones
Music
Play/Pause Press
Volume Down/Up Press - / +
Next Track Long Press +
Previous Track Long Press -
Calls
Answer/ end call Press
Reject a call Long Press
Mute during call Long Press –
Re-dial last call Double press
Call waiting
Receive incoming call and
end ongoing call Press
Receive incoming and on
hold ongoing call Long Press
Pair
Enter pairing mode
(first time) Press
Enter pairing mode Long Press
Voice
To issue a voice command
during idle mode, then say
the command Double Press +

5. LED Indicators
Speaker
Pairing Red-blue flash
Standby Blue flash
Charging (Headphones) Orange steady
Headphones
Pairing Red-blue flash
Standby Blue flash
Charging Red steady
Fully charged Blue steady
Battery low Red flash
6. Power Consumption
Standby mode: 0.5W
O mode: 0.1W

General Information
If your product is not working properly, read
this Quick Start Guide or the User’s Guide of
one of the models listed on page 1.
Contact Customer Service:
[phone] (UK only - Calls cost
7p per minute plus your telephone company’s
access charge.) [phone] (ROl)
Email: [e-mail]
On the Web: www.motorolahome.com/support
Consumer Products and Accessories Limited
Warranty (“Warranty”)
Thank you for purchasing this Motorola
branded product manufactured under license
by Binatone
Electronics International LTD (“BINATONE”).
What Does this Warranty Cover?
Subject to the exclusions contained below,
BINATONE warrants that this Motorola branded
product (“Product”) or certified accessory
(“Accessory”) sold for use with this product
that it manufactured to be free from defects
in materials and workmanship under normal
consumer usage for the period outlined below.
This Warranty is your exclusive warranty and is
not transferable.
THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY HAVE OTHER
RIGHTS THAT VARY BY STATE, PROVINCE
OR COUNTRY. FOR CONSUMERS WHO ARE
COVERED BY CONSUMER PROTECTION
LAWS OR REGULATIONS IN THEIR COUNTRY
OF PURCHASE OR, IF DIFFERENT, THEIR
COUNTRY OF RESIDENCE, THE BENEFITS
CONFERRED BY THIS LIMITED WARRANTY
ARE IN ADDITION TO ALL RIGHTS AND
REMEDIES CONVEYED BY SUCH CONSUMER
PROTECTION LAWS AND REGULATIONS. FOR
A FULL UNDERSTANDING OF YOUR RIGHTS
YOU SHOULD CONSULT THE LAWS OF YOUR
COUNTRY, PROVINCE OR STATE.
Who is covered?
This Warranty extends only to the first
consumer purchaser, and is not transferable.
What will BINATONE do?

BINATONE or its authorised distributor at its
option and within a commercially reasonable
time, will at no charge repair or replace any
Products or Accessories that do not conform
to this Warranty. We may use functionally
equivalent reconditioned/ refurbished/ pre-
owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE
REPAIR OR REPLACEMENT PROVIDED UNDER
THIS EXPRESS LIMITED WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER,
AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED. IN NO
EVENT SHALL MOTOROLA OR BINATONE BE
LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES
IN EXCESS OF THE PURCHASE PRICE OF
THE PRODUCT OR ACCESSORY, OR FOR
ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND,
OR LOSS OF REVENUE OR PROFITS, LOSS
OF BUSINESS, LOSS OF INFORMATION OR
OTHER FINANCIAL LOSS ARISING OUT OF
OR IN CONNECTION WITH THE ABILITY
OR INABILITY TO USE THE PRODUCTS OR
ACCESSORIES TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation
or exclusion of incidental or consequential
damages, or limitation on the length of an
implied warranty, so the above limitations or
exclusions may not apply to you.

Products Covered Length of Coverage
Consumer Products One (1) year from the
date of the products
original purchase by the
first consumer purchaser
of the product .
Consumer
Accessories
Ninety (90) days from
the date of the accessories
original purchase by the first
consumer purchaser of the
product.
Consumer Products
and Accessories
that are Repaired or
Replaced
The balance of the
original warranty or
for Ninety (90) days
from the date returned to
the consumer, whichever
is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal
wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity
and batteries that leak are covered by this
Warranty.
Abuse & Misuse. Defects or damage that
result from: (a) improper operation, storage,
misuse or abuse, accident or neglect, such
as physical damage (cracks, scratches, etc.)
to the surface of the product resulting from
misuse; (b) contact with liquid, water, rain,
extreme humidity or heavy perspiration,
sand, dirt or the like, extreme heat, or food;
(c) use of the Products or Accessories for
commercial purposes or subjecting the Product
or Accessory to abnormal usage or conditions;
or (d) other acts which are not the fault of
MOTOROLA or BINATONE, are excluded from
coverage.
Use of Non-Motorola branded Products and
Accessories. Defects or damage that result

from the use of Non-Motorola branded or
certified Products or Accessories or other
peripheral equipment are excluded from
coverage.
Unauthorised Service or Modification.
Defects or damages resulting from service,
testing, adjustment, installation, maintenance,
alteration, or modification in any way by
someone other than
MOTOROLA, BINATONE or its authorised
service centres, are excluded from coverage.
Altered Products. Products or Accessories with
(a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken
seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded
housings, or parts, are excluded from coverage.
Communication Services. Defects, damages,
or the failure of Products or Accessories due
to any communication service or signal you
may subscribe to or use with the Products or
Accessories is excluded from coverage.
How to Obtain Warranty Service or Other
Information?
To obtain service or information, please call:
[phone] [phone]
(ROl)
Email: [e-mail]
On the Web: www.motorolahome.com/support
You will receive instructions on how to ship the
Products or Accessories at your expense and
risk, to a BINATONE Authorised Repair Centre.
To obtain service, you must include: (a) the
Product or Accessory; (b) the original proof
of purchase (receipt) which includes the date,
place and seller of the Product;(c) if a warranty
card was included in your box, a completed
warranty card showing the serial number
of the Product; (d) a written description
of the problem; and, most importantly;
(e) your address and telephone number.
These terms and conditions constitute the
complete warranty agreement between you
and BINATONE regarding the Products or
Accessories purchased by you, and supersede

any prior agreement or representations,
including representations made in any literature
publications or promotional materials issued
by BINATONE or representations made by any
agent, employee or sta of BINATONE, that
may have been made in connection with the
said purchase.
Disposal of the Device (environment)
At the end of the product life cycle,
you should not dispose of this
product with normal household
waste. Take this product to a
collection point for the recycling of
electrical and electronic equipment.
The symbol on the product, user’s
guide and/ or box indicates this.
Some of the product materials
can be re-used if you take them
to a recycling point. By reusing some parts or
raw materials from used products you make an
important contribution to the protection of the
environment.
Please contact your local authorities in case
you need more information on the collection
points in your area.
Dispose of the battery pack in an
environmentally-friendly manner according to
your local regulations.
European Union Directives Conformance
Statement
The following CE compliance information is
applicable to Motorola products that carry one
of the following CE marks:
Hereby, Binatone declares that this product is in
compliance with:
• The essential requirements and other relevant
provisions of Directive 2014/53/EU
• All other relevant EU Directives
• The Declaration of Conformity can be
obtained from the full user guide at www.
motorolahome.com
Manufactured by Binatone Electronics
International LTD, Floor 23A, 9 Des Voeux Road

West, Sheung Wan, Hong Kong
Imported by: Binatone Communications Europe,
Bosstraat 54/4, 3560 Lummen, Belgium
Manufactured, distributed, or sold by Binatone
Electronics International LTD., ocial licensee
for this product. MOTOROLA and the
Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings,
LLC. and are used under license. Apple logo
is a trademark of Apple Inc., registered in
the U.S. and other countries. App Store is a
service mark of Apple Inc. Google Play and
Android are trademarks of Google Inc. All other
trademarks are the property of their respective
owners. ©2017Motorola Mobility LLC. All rights
reserved.
EN_EU Version 1.0
Printed in China

Sphere/Sphere+
Schnellstartanlei-
tung
DE

MODELLE:
SPHERE/SPHERE+
Frequenzbereich:
2,402 – 2,480 GHz
Maximale RF-Leistung:
6 dBm
Betriebstemperatur:
0°C~45°C
Produkt-ID: SP003
Bluetooth-ID:
D036169
FCC ID: VLJ-SP003
IC: 4522A-SP003
1. Auf einen Blick
3
4
6
5
7
1
2
98

Modus (Wechsel zwischen Bluetooth und Aux-in-
Eingang)
1
2
3
4
5
6
7
8
9
Wiedergabe/Pause
LED-Anzeige (Bluetooth)
Mikrofon
Leiser stellen/Vorheriger Titel
Lauter stellen/Nächster Titel
Ladeanzeige (Kopfhörer)
Aux-in-Anschluss
Netzanschluss
Ein-/Ausschalter
Aux-in
Status-
leuchte
Laden Wiederga-
be/Pause
Lauter
Leiser
(Micro-USB)
MIKROFON

Modus (Wechsel zwischen Bluetooth und Aux-in-
Eingang)
1
2
3
4
5
6
7
8
9
Wiedergabe/Pause
LED-Anzeige (Bluetooth)
Mikrofon
Leiser stellen/Vorheriger Titel
Lauter stellen/Nächster Titel
Ladeanzeige (Kopfhörer)
Aux-in-Anschluss
Netzanschluss
Ein-/Ausschalter
Aux-in
Status-
leuchte
Laden Wiederga-
be/Pause
Lauter
Leiser
(Micro-USB)
MIKROFON
2. Verbindungsherstellung
1
1. Verbinden Sie das Netzkabel
mit dem Lautsprecher-
Netzanschluss.
2. Der Lautsprecher wechselt
automatisch in den Pairing-
Modus und die LED blinkt
blau und rot.
3. Verbinden Sie Ihr Smartphone
mit dem Lautsprecher.
4. Wählen Sie „Sphere“/
„Sphere+“ in der Liste.
2
1. Nehmen Sie den Kopfhörer
vom Dockinglautsprecher.
2. Der Kopfhörer wechselt
automatisch in den Pairing-
Modus und die LED blinkt
blau und rot.
3. Verbinden Sie Ihr Smartphone
mit dem Kopfhörer.
4. Wählen Sie „Sphere
Headphones“/„Sphere+
Headphones“ in der Liste.
3
• Die Verbindung ist nun
hergestellt. Sie können
entweder über den
Lautsprecher oder den
Kopfhörer Musik hören.
3. Audioübertragung
Sie können eine nahtlose Audioübertragung
zwischen dem Kopfhörer und dem
Lautsprecher genießen, wenn Sie Musik hören.
Stellen Sie sicher, dass Ihr Smartphone eine
Bluetooth-Verbindung mit zwei Bluetooth-
Geräten gleichzeitig unterstützen kann,
indem Sie die Bluetooth „Verbindungsliste“

Ihres Smartphones prüfen. Wenn sowohl der
Lautsprecher als auch der Kopfhörer in der
Liste als „verbunden“ angezeigt werden, wird
eine simultane Verbindung unterstützt.
1

1. Legen Sie den Kopfhörer auf den Lautsprecher.
2. Die Musikwiedergabe über den Kopfhörer
bricht ab und der Kopfhörer wird über den
Lautsprecher aufgeladen. Achten Sie darauf, den
Kopfhörer korrekt auf den Dockinglautsprecher
zu setzen. Wenn der Kopfhörer geladen wird,
leuchtet die LED orange.
3. Der Lautsprecher verbindet sich automatisch
mit dem Smartphone*
4. Drücken Sie einmal kurz die Wiedergabe-
Taste. Die Musik wird automatisch über den
Lautsprecher ausgegeben, ohne dass Sie eine
Taste an Ihrem Smartphone bedienen müssen.
2

1. Nehmen Sie den Kopfhörer vom Lautsprecher.
2. Die Musikwiedergabe über den Lautsprecher
bricht ab.
3. Der Kopfhörer verbindet sich automatisch mit
dem Smartphone*
4. Drücken Sie einmal kurz die Wiedergabe-
Taste. Die Musik wird automatisch über den
Kopfhörer ausgegeben, ohne dass Sie eine
Taste an Ihrem Smartphone bedienen müssen.
* Die Dauer der erneuten Verbindung variiert von
Smartphone zu Smartphone.

4. Bedientasten
Lautsprecher und Kopfhörer
Musik
Wiedergabe/Pause drücken
Leiser/Lauter stellen - / + drücken
Nächster Titel + länger gedrückt
halten
Vorheriger Titel - länger gedrückt
halten
Telefonieren
Gespräch annehmen/beenden drücken
Anruf ablehnen länger gedrückt
halten
Stummschalten während eines
Anrufs – länger gedrückt halten
Wahlwiederholung des letzten
Anrufs zweimal drücken
Anklopfen
Eingehende Anrufe annehmen
und laufende Gespräche
beenden drücken
Eingehende Anrufe annehmen
und laufende Gespräche in die
Warteschleife schalten
länger gedrückt
halten
Verbinden
Pairing-Modus aktivieren
(erstmalig) drücken
Pairing-Modus aktivieren länger gedrückt
halten
Sprachsteuerung nutzen
Um im Stand-by-Modus
einen Sprachbefehl zu geben,
sprechen Sie den Befehl
laut aus.
+ zweimal drücken

5. LED-Anzeigen
Lautsprecher
Verbindungsherstellung Blinkt rot und blau
Stand-by Blinkt blau
Lädt (Kopfhörer) Leuchtet stetig orange
Kopfhörer
Verbindungsherstellung Blinkt rot und blau
Stand-by Blinkt blau
Lädt Leuchtet stetig rot
Voll geladen Leuchtet stetig blau
Niedriger Akku-
Ladestand Blinkt rot
6. Stromverbrauch
Stand-by-Modus: 0,5 W
Ausgeschaltet: 0,1 W