Audio Excellence Raijuu 1 User manual

Screen Excellence Ltd. 136 Bentwaters Parks, Rendlesham, Suffolk, IP12 2TW, UK Version 1.0
User Manual
The Raijuu loudspeakers are subwoofers operating from 20 Hz to 100 Hz. They are to
be coupled to limited-range loudspeakers via an active DSP crossover.
Please refer to Congard Code for the correct placement of your Raijuu Bass speaker to
achieve a realistic sound stage to compliment any film material in your cinema
http://audioexcellence.one/congardcode.html

Screen Excellence Ltd. 136 Bentwaters Parks, Rendlesham, Suffolk, IP12 2TW, UK Version 1.0
Raijuu 1
The Raijuu 1 is a very small compact subwoofer designed to be shallow enough to fit in
a drywall. It is a closed-box design operating below its resonance frequency, hence
providing a band-pass response defined by a 2nd order low-pass function provided by
a DSP unit.
1. Dimensions:580 x 360 x 102 mm
2. Weight:20 kg
3. Connector: Pair of binding posts
4. Drive unit:1 x 12” ultra-flat high power driver
5. Frequency response: Fc-100 Hz
6. Impedance:8 Ω
7. Power handling:400 W
8. Max.SPL@1m@40Hz:104dB
9. Max.SPL@1m@20Hz:91dB
10. Option 1: In-wall adaptation kit

Screen Excellence Ltd. 136 Bentwaters Parks, Rendlesham, Suffolk, IP12 2TW, UK Version 1.0
Connections
Close up detailing the signal binding post pair ready to receive the signal from the
amplifier output channel. The binding post with the red trace would be the positive
connection and black the negative connection.
Rubber feet are supplied to help isolate the speaker from any hard surfaces when it is
located on the floor.

Screen Excellence Ltd. 136 Bentwaters Parks, Rendlesham, Suffolk, IP12 2TW, UK Version 1.0
Raijuu 2
The Raijuu 2 is a compact subwoofer designed to provide the maximum impact and SPL
for an ultimate playback of the LFE channel. It is a vented design.
1. Dimensions:650 x 550 x 339 mm
2. Weight:40 kg
3. Connector: Speakon 2
4. Drive unit:1 x 18” high power driver
5. Frequency response:20-100 Hz
6. Impedance:8 Ω
7. Power handling:1400 W
8. Max.SPL@1m@40Hz:120dB
9. Max.SPL@1m@20Hz:110dB

Screen Excellence Ltd. 136 Bentwaters Parks, Rendlesham, Suffolk, IP12 2TW, UK Version 1.0
Connections
Speakon 2 NL2MP signal input.
The signal input can be found at lower right-hand
side.
Input Signal is connected to the driver via a
NL2FX Speakon 2 plug, Same is used to connect
the lead to the amplifier output channel.
This Wiring connections to rear of the NL2FX
signal plug:
1+ Positive (red) and 1- Negative (black)