2
OPERATING INSTRUCTIONS
INTRODUCTION
The SPS/Audiovox Six (6) Disc CD Changer system installed in
your vehicle has been designed to operate using the controls of
thefactoryradio. Ingeneral,theoperationoftheCDChangerwill
be as per the instructions for the audio equipment included with
your vehicle Owner’s Manual. However, there are a few
differencesasdescribedherein,sopleaserefertothisbookletfor
questions you may have on the system operation.
Since the CD Changer will operate through the sound system of
the vehicle, adjustment of the audio functions (volume, tone,
balance, etc.) is made by using the controls on the car stereo.
Thespecificdetailson thehandlingofdiscsandtheuseoftheCD
magazine(loading,removal,etc.)willbefoundwithintheOwner’s
Manual of the compatible changer used in the system. Please
note that the discs are loaded label side up in some changer
modelsandlabelsidedowninothermodels. Thecorrectmethod
is shown in the manual for the changer and is indicated on the
magazine itself. Make sure to load the discs correctly as the
changer will not operate if the discs are inserted up-side-down.
SETTING UP FOR OPERATION
Following the instructions in the Owner’s Manual of the CD
Changer,load thedesired numberof discsinto theCD magazine
and insert the magazine into the changer.
Withthecarstereooperating,turnontheCDChangerbypressing
the“CD”buttonontheradio.Playofthechangerwillbeginandthe
disc number and track number will appear on the radio display
panel. PlaywillbeginfromthefirstdiscifanewCDmagazinehas
beenloadedintothechangerorwillresumefromthepointatwhich
ithadpreviouslyplayedifamagazinewasalreadyinthechanger.
Adjust the volume, tone, and balance to your taste by using the
controls on the car stereo.
Whenthelasttrackonadischasplayed,theunitwillautomatically
advancetoandbeginplayofthenextdiscinthemagazine. When
thelasttrackonthelastdiscinthemagazinehasbeenplayed,the
unitwill automaticallyreturn tothe firstdisc andcontinue playing.
To return to radio operation from CD play, press the radio band
button(“AMFM”or“AM”“FM”dependingonradiotype). Toreturn
to tape operation from CD play, simply insert a tape into the
cassette deck. To return to CD Changer operation from radio or
tape play, press the “CD” button.