Audioxtra Axis JS5020CK User manual

1
JS5020CK
5” Caravan Camera Kit
JAPAN QUALITY

2
CONTENTS
Important Notes .................................................................................................................................................................................. 2
Keystroke Instructions ..................................................................................................................................................................... 3
Menu Operation Instruction ......................................................................................................................................................... 4
Wiring Diagram ................................................................................................................................................................................... 5
Bracket Installation ............................................................................................................................................................................ 6
Specifications ...................................................................................................................................................................................... 7
Warranty .................................................................................................................................................................................................. 8
IMPORTANT NOTES
1. Do not try to open the covers.
2. Please disconnect the power if anomolies occur.
3. Do not use organic solvents on the surfaces to avoid damage to the coating.
4. Do not apply force to the wiring leads to avoid internal damage.
5. Keep the product away from high dirt/dust enviroments, direct high temperature sun
light and high humidity conditions.
6. Install the product so that it does not fall down.
7. Follow wiring diagram strictly or warranty will be voided and can result in damage to the
vehicle’s electrical system.
8. Do not change functions while driving.
9. Comply with the operating temperature of this unit.

3
KEYSTROKE INSTRUCTION
Power
AV Input Select
- Volume & Menu DOWN Function
M MENU
+Volume + Menu UP Function
CH1 Camera Input 1
CH2 Camera Input 2
CH3 Camera Input 3
3
5฀3 way video inputs, 2 way trigger wiresWith reverse polarity protection;Separately supply DC12V power to each camera;AV2/AV3 with trigger wires;(5";7";9")Analog
screen : 320RGB ( H ) x234 ( V ) ( 5 . 6 ")
Digital screen:800RGB(H)x480(V)
Digital screen:1024RGB(H)x600(V) (10.1")Reversing image delay time 0~15s;Separately adjust camera mirror/ normal image;Multi-language15# Remote control/Keystroke
SpecificationsAudio;RCA/Aviation connector optionalScreen SizeResolutionSystemOSD MENUVideo InputsBrightnessContrastVoltageFeaturesOperation ModeOptionalPAL/NTSC/AUTO450cd/㎡450:1DC10V~36VFunction Optional1) Remove/Nonremove sun shade optional 2) With/without light sensor optional3) Keystroke with/without blue LED light optional4) Headrest Shroud/ U bracket/ Metal bracket optional Butterfly Plastic Bracket U-Bracket Metal Bracket Headrest Shroud4V1/V2; AV; SEL; PowerCHL/RM; MENU-;+;; IRPower OnVideo SwitchGuide LinesImage Normal/MirrorMENUAnalog DecreaseAnalog IncreaseIR ReceiverLight SensorEarphone Jack(Decorate Only)InactionAnalog Increase341012131579562811114123456789101112131415
REMOTE CONTROL
MODETIMERGRIDSELMENU
16:9 4:3
RESET
CHCHCHMuteHorizontal Mirror/Normal ImageVertical Mirror/Normal ImageVolume DownVolume UpMenuAnalog DecreaseRemote InstructionKeystroke Instruction12345678910111234567891011Power OnModeGuide Lines16:9/4:3Timer (0~240mins)AV SwitchoverReset
Analog Increase123456789101112131415341012131579562811114
REMOTE CONTROL
MODETIMERGRIDSELMENU
16:9 4:3
RESET
CHCHMuteHorizontal Mirror/Normal ImageVertical Mirror/Normal ImageVolume DownVolume UpMenuAnalog DecreasePower OnModeGuide Lines16:9/4:3Timer (0~240mins)AV SwitchoverResetKEYSTROKE INSTRUCTION PowerAV Input Select - Volume & Menu Down FunctionM Menu: Adjust Brightness, Contrast, Colour, Screen Orientation, Trigger, Guidlines, Language, Reset. + Volume+ Menu UP FunctionCH1 Camera Input 1CH2 Camera Input 2CH3 N/A4

4
MENU OPERATION INSTRUCTION
Press “MENU”, the screen will show “PICTURE”
Press “- +” to select other feature. Press “- +” to adjust parameter.
Press “MENU” over and over again, the screen will show pictures below.
Brightness 0~100
Contrast 0~100
Colour 0~100
Reset
Volume 0~100
Language Optional
Rotate Normal/Flip/Mirror/Mirror Flip
Zoom 4:3/16:9
VIV2 - 3s Playback
BC2 - AV1 Optional
Auto Dim Optional
S - Color PAL/NTSC/AUTO
Guidleines Optional
ACC1 -Time Image Delay 0~15S
ACC2 - Time Image Delay 0~15S
ACC3 - Time Image Delay 0~15S
Sleep 0~240mins

5
WIRING DIAGRAM
G
G
N
N
D
D
(
(
B
B
l
l
a
a
c
c
k
k
)
)
P
P
O
O
W
W
E
E
R
R
(
(
R
R
e
e
d
d
)
)
T
T
R
R
I
I
G
G
1
1
(
(
Y
Y
e
e
l
l
l
l
o
o
w
w
)
)
T
T
R
R
I
I
G
G
2
2
(
(
B
B
l
l
u
u
e
e
)
)
T
T
R
R
I
I
G
G
3
3
(
(
O
O
r
r
a
a
n
n
g
g
e
e
)
)
T
T
R
R
I
I
G
G
G
G
E
E
R
R
W
W
I
I
R
R
E
E
G
G
N
N
D
D
(
(
B
B
l
l
a
a
c
c
k
k
)
)
P
P
O
O
W
W
E
E
R
R
+
+
(
(
R
R
e
e
d
d
)
)
C
C
a
a
m
m
e
e
r
r
a
a
B
B
r
r
a
a
c
c
k
k
e
e
t
t
B
B
r
r
a
a
c
c
k
k
e
e
t
t
C
C
a
a
m
m
e
e
r
r
a
a
M
M
o
o
n
n
i
i
t
t
o
o
r
r
WIRING DIAGRAM6
GROUNDAUDIOVIDEOPOWERDefinition: Monitor connector front view

6
BRACKET INSTALLATION (Included)
1. U-Bracket Installation
Fix the U-bracket into position. Insert and lock the monitor into the bracket using the mounting
gymbal knobs.
2. Adjust the angle as required.
CAMERA INSTALLATION
A. Hanging Installation: Please fix the camera on the top of boot back lid or the license plate. The
offered screws are needed to fix the camera direction.
B. Insert Installation: Please drill hole on the car. The hole size must be as same as the size of
the camera.
For the sake of safety, please do not watch the video while driving, except driving assist video!7Bracket InstallationModel: 2;3;4;5;6;7;8;9;10 can choose the bracket:Headrest Frame; Plastic/Metal bracketModel: 1;11;12;13 can choose the bracket:Headrest Frame; Metal; U-Bracket1. U-Bracket Installation1) Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.2) Finished the installation. Adjust the angle forward 30°to backward 30°.User can adjust a suitable angle by oneself.2. Plastic/Metal Bracket Installation1) Firstly fixed the bracket via the screws, the screws of the top need lock tonut of under.2) Secondly put the metal buckle piece on the top of the fan-shaped bracketinto the notch at the back of the monitor.3) Move the bracket to the properlocation.4) Screw down the nut of bracket,until the monitor fastening.
For the sake of safety, please do not watch the video while driving, except driving assist video!7Bracket InstallationModel: 2;3;4;5;6;7;8;9;10 can choose the bracket:Headrest Frame; Plastic/Metal bracketModel: 1;11;12;13 can choose the bracket:Headrest Frame; Metal; U-Bracket1. U-Bracket Installation1) Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.2) Finished the installation. Adjust the angle forward 30°to backward 30°.User can adjust a suitable angle by oneself.2. Plastic/Metal Bracket Installation1) Firstly fixed the bracket via the screws, the screws of the top need lock tonut of under.2) Secondly put the metal buckle piece on the top of the fan-shaped bracketinto the notch at the back of the monitor.3) Move the bracket to the properlocation.4) Screw down the nut of bracket,until the monitor fastening.
For the sake of safety, please do not watch the video while driving, except driving assist video!7Bracket InstallationModel: 2;3;4;5;6;7;8;9;10 can choose the bracket:Headrest Frame; Plastic/Metal bracketModel: 1;11;12;13 can choose the bracket:Headrest Frame; Metal; U-Bracket1. U-Bracket Installation1) Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.2) Finished the installation. Adjust the angle forward 30°to backward 30°.User can adjust a suitable angle by oneself.2. Plastic/Metal Bracket Installation1) Firstly fixed the bracket via the screws, the screws of the top need lock tonut of under.2) Secondly put the metal buckle piece on the top of the fan-shaped bracketinto the notch at the back of the monitor.3) Move the bracket to the properlocation.4) Screw down the nut of bracket,until the monitor fastening.
For the sake of safety, please do not watch the video while driving, except driving assist video!7Bracket InstallationModel: 2;3;4;5;6;7;8;9;10 can choose the bracket:Headrest Frame; Plastic/Metal bracketModel: 1;11;12;13 can choose the bracket:Headrest Frame; Metal; U-Bracket1. U-Bracket Installation1) Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.2) Finished the installation. Adjust the angle forward 30°to backward 30°.User can adjust a suitable angle by oneself.2. Plastic/Metal Bracket Installation1) Firstly fixed the bracket via the screws, the screws of the top need lock tonut of under.2) Secondly put the metal buckle piece on the top of the fan-shaped bracketinto the notch at the back of the monitor.3) Move the bracket to the properlocation.4) Screw down the nut of bracket,until the monitor fastening.
Mounting
Surface Installation
Mounting Mounting

7
SPECIFICATIONS
MONITOR
TFT Panel: New Grade A LCD
LCD Size: 5-Inch Diagonal
Display Format: 16:9
Resolution: 800 x 480
Brightness: < 450 CD/M2
Viewing Angles: 70° Left/Right/Up/Down
Video System: Auto PAL/NTSC Select
Video Connect: 3 x 4-Pin (Female)
Reverse Trigger: Yes, Each Input
Monitor View: Normal/Mirror Image Select
Buttons: Illuminated
Guidelines: Selectable On/Off (Camera 2 Only)
Audio: On Board Speaker
Menu: OSD
Operating Temp: -20°C to +70°C
Power Input: 12-32V DC (Negative Ground)
Brackets: U-Mount, Glass Mount
Dimensions: 132W x 95H x 26D mm (excluding bracket)
Finish: Matt Black Rubber
HEAVY DUTY CAMERA
Image Sensor: 1/3” Sony CCD
Auto Lens: f2.9mm
Electronic Shutter: Auto
Vertical Viewing Angle: 120°
Horizontal Viewing Angle: 90°
Signal System: PAL
Resolution: 700 TV Lines
Sync System: Internal
Orientation: Mirror Image
Night Vision: Yes, 18 LED
Illumination: 0 Lux with IR on
Ingress Protection: IP69K
Operating Temperature: -20°C ~ 70°C
Dimensions: 70W x 45H x 60D mm (Excl Bracket)
Connection: Terminated 4-Pin Male
Power Supply: 12V DC (From Monitor)
DUAL MOUNT CAMERA
- Image Device: 1/3” CMOS
- Diagonal Viewing Angle: 165°
- Horizontal Viewing Angle: 120°
- Signal System: PAL
- Effective Pixels: 640 x 480
- Resolution: 480 TV Lines
- Compatibility: All Monitors with RCA Input
- Lens: Full Glass
- Orientation: Mirror Image
- Guidelines: Selectable On/Off
- Night Vision: 0.2 Lux
- Ingress Protection: IP67
- Integrated Microphone: No
- Operating Temp: -20 to 70°
- Power Consumption: 90-300mA
- Connection: Mini 4 Pin Terminated RCA (F), RCA (M) to 4 Pin Adaptor
- Lead: 6M Mini 4 Pin to RCA (M)
- Dimensions: 16.5W x 16.5H x 23D mm (Excluding Bracket)
- Power Supply: 12V DC
TRAILER QUICK CONNECT
Curly Cable Length: 0.5m (Original State)
4.0m (Elongated)
Mounting Plate: 5-Pin (Male) Metal Plug with
Weather Cover
Brackets: 2 x Metal Plug Mounting Brackets
Cable (Monitor Side): 10m Terminated to 4-Pin (Male)
(Trailer Plug to Monitor)
Cable (Camera Side): 15m Terminated to 4-Pin (Female)
(Camera to Trailer Plug)
INCLUDES
U-Shape Mount
Power Cable Assembly
Sunshade
Remote Control
Glass Mount Bracket
HEAVY DUTY CAMERA (White)
15m 4-Pin (Male) to 4-Pin (Female) Extension Cable
Mounting Bracket
Sunvisor
DUAL MOUNT CAMERA
15m 4-Pin (Male) to 4-Pin (Female) Extension Cable
Installation Hardware
Metal Hole Saw for Bumper Fit Installation
6m Video Cable (RCA M to RCA M)
TRAILER QUICK CONNECT
Curly Cable (0.5m - Original State & 4.0m - Elongated)
2 x Metal Plug Mounting Brackets
10m Terminated to 4-pin male connector(to plug into monitor)
0.3m Terminated to 4-pin female connector(to plug into camera)
RCA(M) to 4-pin(M) Adaptor cable

8
Congratulations on your purchase of a quality Mobile Safety System! You’re joining thousands of
satisfied customers who enjoy & experience the benefits of the products we distribute. In the unlikely event that
some technical difficulty arises with your purchase, be assured that we are most anxious to see that the problem is
quickly rectified to your satisfaction. Please familiarise yourself with the following simple conditions of our warranty.
This warranty covers faults through component failure or failure of the product to operate in accordance with
published specifications. Product failure as a result of unreasonable environmental conditions, accident, misuse,
improper installation, unauthorised repair, vehicle electrical or wiring faults or neglect etc, will not be covered by this
warranty. Removal and installation costs, if any, would be paid by the owner as well as any freight or postage costs of
transporting the product to AudioXtra. AudioXtra shall not be liable or responsible for any loss of use of this product
or any form of consequential loss.
CONSUMER WARRANTY
This product is warranted by AudioXtra Pty Ltd to be free from defects in materials and workmanship under
NORMAL USE for a period of TWENTY FOUR MONTHS from the date of purchase.
WITHIN 30 DAYS OF PURCHASE DATE:
Please return the unit for replacement to our National Service Centre or the Retailer from where you made the
purchase. All accessories must be included. Proof of purchase date must accompany the products.
AFTER 30 DAYS OF PURCHASE DATE:
Warranty repair and service is carried out by our National Service Centre. Repair and service will be carried out at no
cost to the owner if proof of ownership and the date of purchase can be verified to the satisfaction of the authorised
centre concerned with this repair. This proof should take the form of either:
a) The warranty card accompanying this product, stamped and dated by the dealer.
b) A Tax Invoice or Receipt showing full details of original vendor, purchaser, model number and serial number.
COMMERCIAL WARRANTY
A product used in or associated with a commercial application will carry a limited SIX MONTH warranty. An abnormal
commercial application is one where usage, dust, vibration, heat/cold and other environmental conditions exist at an
extreme level.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Please complete details below in the event of warranty service being required.
Purchaser’s Name:
Purchaser’s Address:
Model Number:
Dealer Name:
Dealer Address:
Invoice/Sales Docket no:
Serial Number:
Date of Purchase: / /
General Hints: To expedite service and prompt return of the equipment, please:
a) Clearly describe the fault in detail b) Safely and securely pack the unit for transport
c) Include your return address d) Provide proof of purchase date as outlined above
National Service Centre:
10 STODDART ROAD, PROSPECT, SYDNEY NSW 2148 Australia
Telephone: [phone] Fax: [phone]
email: [email protected]
PTY
LT D
audioxtra.com.au
WARRANTY
JS5020CK