August DA110BD User manual

Thank you for buying our August TV. You may already be familiar with using
a similar product but please take time to read these instructions carefully. It is
designed to familiarise you with the product’s many features and to ensure
that you get the very best from your purchase.
Safety
To ensure your safety and the safety of others, please ensure you read the
Safety Instructions before you use this product.
Disposal
Please ensure the product and its accessories are disposed in compliance with
WEEE (Waste Electrical and Electronic Equipment) Directive and other
regulations. Please check with your local authority for disposal regulations.
Customer Service:
If you need help, please contact our Customer Service:
Telephone: [phone]
Email: [email protected]
User Manual
Quick Start Guide
DA110BD
It is suggested that you use a roof top aerial when scanning for TV channels
for the first time, if any signal is detected, the channel information will be
saved on the TV, you may then switch back to the portable antenna supplied
and change your location to find the best place to receive signal.
When turning on the device for the first time, to search for Digital Freeview
TV, press DVD/DVB to switch to DVB (Freeview TV) mode, it will ask
you to do the “First Time Installation”. Follow the instructions to select
“Country” and start the “Auto Scan”. Once the scan has finished, press
CH+, CH- or EPG to select channels.
To search for Analogue TV, press TV/AV on the remote repeatedly to switch
to Analogue TV mode and you should see either “AUTO”, “PAL” or
“SECAM” at the top right corner of the screen. Press MENU once to enter
the first menu to change “Bright”, “Contrast”, “Colour” and “Language”.
Press MENU again to enter the second menu to search for channels, change
the video system (S-COLOR) between AUTO, PAL and SECAM, and
change the sound system (S-SYS) between I (UK), L (France), BG (other
European countries) and DK (Russia and Asia countries). Press DOWN on
the second menu to select “AUTO-SEARCH”, then press RIGHT to start
searching for channels.
If you have done the first time installation before, and would like to search
for Digital Freeview channels again, or if you have moved to a different
region and need to scan for channels again, press DVD/DVB to switch to
DVB (Freeview TV) mode, then press SETUP, press RIGHT repeatedly
until it shows “Auto Scan”, press ENTER to confirm and follow the
instructions on the screen to setup and start the scan. Once the scan has
finished, press CH+, CH- or EPG to select channels.
To play a DVD or CD, insert the disc into the DVD drive, press DVD/DVB
to switch to DVD mode, press PLAY or wait for the player to load the disc
automatically.
1.
2.
3.
4.
5.

To play music, photos or video files on a SD card or memory stick, insert
the SD card or memory stick to the card slot or USB port, press DVD/DVB
to switch to DVD mode, press DVD/CARD/USB to select playing files
from card or USB stick, press LEFT or RIGHT to switch between the
“Audio”, “Photo”, “Video” folders and Subtrack, press UP or DOWN to
select the file you want to play, press ENTER or PLAY to start playing.
If your TV model has a built-in battery, there are power sockets on both
sides of the TV, the side with “CHG” is only for charging the battery. When
connected with a power adapter, the red light “CHG” will be on, which
means that it is charging. The power socket on the other side of the TV is
for watching TV only.
Please note the included portable antenna may only be used in areas where
signal is very strong. There may be difficulties in receiving signal with the
portable antenna in some regions at present, this is due to the fact that
Freeview (www.freeview.co.uk) is yet to operate in full power in the UK.
The government aims to achieve a full switchover by 2012, which will
occur in stages, region by region between 2008 and 2012, at present the
quality of Freeview reception varies in different regions across the UK.
As mentioned on the Freeview website, only 73% of the UK population is
able to receive Freeview at present and only a small number of households
might be able to use a set top aerial at present. This only applies if you live
in an area with coverage close to a transmitter, but reception would still be
unreliable and they strongly recommend that you use a roof top aerial for
good reception.
The reception will be improving along with the progress of the Digital
Switchover Program. Reception may also be affected by various factors
such as how close you are to transmitters, tall buildings, thick walls,
ceilings and weather etc.
For any further queries, please telephone August International Ltd helpline
0870 850 3525 or email [email protected]
6.
7.
8.
9.
1
3
3
4
6
8
8
8
8
8
8
9
10
11
12
16
16
17
17
17
17
17
17
18
21
22
22
23
25
26
1.Safety Instructions
2.Product Features
3.Accessories
4.Part Names and Functions
5.Remote Control
6.Connections
6.1.Installing the base support
6.2.Connecting the power supply
6.3.Connecting the earphones
6.4.Connection of AV input
6.5.Connection of AV output
6.6.System connection
7.DVD Player Operation
7.1.Basic operations
7.2.DVD setup menu
7.3.Playing MP3 music
7.4.Playing JEPG photos
7.5.Playing MPEG4 video
7.6.USB port
7.7.Card reader
8.Digital Freeview TV (DVB-T)
8.1.Turn on the machine
8.2.First time installation
8.3.Main menu
9.Analogue TV
10.AV Input
11.Battery Charging
12.Troubleshooting
13.Technical Parameters
14.Warranty

-1-
1.Safety Instructions
Storage and Use
Keep this machine
away from hot or
cold places.
The storage
temperature of this
machine is -20~
60℃, the
application
temperature of this
machine is 5~35℃.
Never put this
machine in
containers that
are unstable as
this may cause
damage.
Avoid this
machine from
being dropped
or impact.
Never expose the
TV set to moisture,
dust, oil or smoke.
To prevent electric shock, do not expose the unit to rain or moisture. Never
attempt to open the case, high voltages are present in the unit.
1.Please place the unit in a place with a good airflow.
2.It is normal for the cover and rear panel to become warm after the player
has been operating for an extended period of time.
3.Do not move this device during playback. Doing so may cause damage
to the unit and the disc.
4.The DVD Video player is a CLASS 1 LASER product. There may be
dangerous laser radiation inside. As the laser beam used in this DVD
Video player is harmful to the eyes, do not attempt to disassemble the
cabinet.
Keep the TV set
away from water
or damp
environment.
Avoid dropping
or exposing to
impact.
DDV
VIDEO
DDV
ID
V EO
D DV
VIDEO
D D
V
VIDEO
DVD
VIDEO
D DV
VIDEO
-2-
1.Please do not turn your headphone / earphone to high volumes, otherwise, it
may lead to ear damage.
2.For open-designed earphones to avoid disturbing those close by, please turn
down the volume.
3.In case of any tinnitus, please turn down the volume or stop using this
machine.
4.It is recommended by aurists that earphones should not be used continuously
for a prolonged period.
For the sake of safety for yourself and others, please do not watch the TV
while driving.
1.Only the attached AC adaptor and the car adaptor are suitable.
2.For the sake of safety, when you do not intend to use the display, please
switch off the AC adaptor or car adaptor.
DVD
VIDEO
DVD
VIDEO
Please wipe the
display screen and
buttons with a soft
cloth. Only clean
the screen with
professional LCD
TV screen cleanser.
Never wipe this
machine with
abrasive cloth,
detergent powder,
alcohol and
benzene etc.
various propellants
or chemical
cleaning products.
A few highlights or dark spots may appear on the LCD screen. It is a very
common phenomenon of active matrix display technology, and does
Please unplug all connection wires before start cleaning this machine.
precise electronic components. Any disassembly or modification may lead
to furher damage.

-3-
1.11 inch Freeview and Analogue LCD TV
2.Slot-in multi-region DVD Player
3.Supports DVD/DVD-R(W)/DVD+RW/DIVX(MPEG4)/SVCD/VCD/MP3
/WMA/ CD/CD-R(W)/JPEG formats
4.SD/MMC card reader and USB port for video, music and photo playback
5.Electronic Program Guide (EPG) and subtitles
6.Multilanguage on screen display menu
7.Monitor for AV devices and game consoles
8.Outputs Freeview TV, video, music and photos to an external large screen TV
2. Product Features
Base support
3. Accessories
AV in/out cord
Double-sided adhesive
pad for base support
Remote control
Car adaptorAC/DC adaptor
This player can not play disc, card and USB stick at the same time.
4. Part Names and Functions
-4-
24
13
14
15
16
17
18
19
21
21
22
20
Menu
Search/Enter
VOLMode
1 2 3 4 5 6 7
9
10
8
11
12
DVD
13
14
15
16
17
18
19
20
23
(With battery)
(Without battery)
1. DVD/DVB-T/ATV/AV Shift
2. Play/Pause/Search
3. Volume- / Left
4. Volume+ / Right
5. Stop / Menu
6. Previous / Channel-
7. Next / Channel+
8. Power On / Standby switch
9.TFT-LCD screen
10.Power indicator
Standby:Red
Turn on:Green
11. IR receiver
12. Stereo speakers
13. Eject
14. AV IN
15. AV OUT (DVD/DVB-T mode only)
16. SD/MS/MMC Port
17. USB port
18. Earphone jack
19. Power ON/OFF switch
20. +10V - 13.8V DC Power In
21. Slot-in DVD loader
22. Antenna input jack
23. Charge indicator
24. +13.8V DC Power In
(for battery charging)

Panel Button Functions
-5-
1.In DVD mode, press and hold MODE on the panel to switch to DVB-T mode.
2.In DVB-T mode, press and hold MODE on the panel to switch to DVD mode.
This table explains the functions of the buttons on the panel in each mode:
①
②
③
④
⑤
⑥
⑦
⑧
Panel Button DVD DVB-T ATV
Mode Mode/DVB-T Mode/DVD Mode
Search
AV
Mode
VOL- VOL-
VOL+ VOL+
Menu Menu
Power Power Power Power Power
5. Remote Control
1.POWER
2.DVD/DVB-T Shift
3.EJECT
4.SUBTITLE
5.LANGUAGE
6.DVD/CARD/USB Shift
7.SETUP
8.UP/DOWN/LEFT/RIGHT
9.ENTER
10.TITLE/PBC
11.REV
12.FWD
13.STOP
14.PLAY/PAUSE
15.MUTE
16.A-B
17.RADIO
18.EPG
19.TV/AV
20.DISPLAY
21.NUMBER
22.SEARCH/GOTO
23.REPEAT
24.MENU
25.P.P
26.L/R
27.FAV/ZOOM
28.NEXT
29.PREV
30.TTX(not available)
31.SLOW
32.VOLUME+
33.VOLUME-
34.PRLIST
35.RETURN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
19
-6-

Remote Control Functions
Remote Button DVD DVB-T ATV AV
POWER ON/OFF STANDYON/OFF STANDYON/OFF STANDY ON/OFF STANDY
DVD/DVB-T DVD/DVB-T DVD/DVB-T DVDDVD
EJECT EJECT
SUBTITLE SUBTITLE SUBTITLE
LANGUAGE LANGUAGE LANGUAGE
DVD/CARD/USB DVD/CARD/USB
SETUP SETUP SETUP
/CH+ /CH+ /CH+
/CH-/CH-/CH-
ENTER ENTER ENTER
TITLE/PBC TITLE/PBC
(STOP) (STOP)
(PLAY/PAUSE) (PLAY/PAUSE)
MUTE MUTE MUTE MUTE MUTE
A-BA-B
RADIO RADIO
EPG
EPG
TV/AV TV/AV TV/AV TV/AV TV/AV
DISPLAY DISPLAY DISPLAY DISPLAY DISPLAY
0~9 0~9 0~9
10+/-/-- 10+
SEARCH/GOTO GOTO SEARCH SEARCH
REPEATREPEAT REPEAT
MENU MENU MENU MENU MENU
L/R L/R L/R
FAV/ZOOM ZOOM FAV
TTX
VOLUME+ VOLUME+ VOLUME+ VOLUME+ VOLUME+
VOLUME-VOLUME-VOLUME-VOLUME-VOLUME-
PRLIST PRLIST
RETURN RETURN
0~9
-/--
-7-
This table explains the functions of the buttons on the remote control in each mode:
P.P P.P P.P P.P P.P
SLOW SLOW
Notice
6. Connections
6.1. Installing the base support
Unscrew the oval handle on the
ball-joint, it will split into halves,
embrace them on the top of the base
support, then tighten the oval handle.
Slide the metal surface of the
ball-joint into the slot on the back
of the TV, then tighten the screw.
6.2. Connecting the power supply
Insert the power supply plug on the
AC adaptor into the jack on the TV
marked DC +10V 13.8V.~
6.3. Connecting the earphones
Insert the earphone plug into the
earphone jack on the TV.
If earphones are used, sound is only transmitted through the earphones, and
no sound is available from the stereo speakers of the TV.
6.4.Connection of AV Input
Connect the yellow port of the AV
cable to the video jack, the white port
to the left audio jack and the red port
to the right audio jack, then insert the
AV head into the AV input jack on
the TV.
6.5. Connection of AV Output
Connect the yellow port of the AV
cable to the video jack, the white port
to the left audio jack and the red port
to the right audio jack, then insert the
AV head into the AV output jack on
the TV.
-8-
AV O U T
DC IN:+12V
AV IN
SD /M S /MM C
AV O U T
AV IN
O N O FF
US B
AV IN
O N O FF
DC IN:+12V

6.6. System connection
1. Always turn off all devices before connecting or disconnecting any cables.
2. Audio/Video cables should be connected correctly according to the colour.
Yellow plug - Video jack
White plug - Left Audio jack
Red plug - Right Audio jack
3. Connection illustration
Notice
This player can not play disc, card and USB stick at the same time.
-9-
(with battery) (Without battery)
POWER
EJECT
Keep pressing
7. DVD Player Operation
After the system is connected, you can use
the unit in DVD mode. Before use, please
follow the instructions below:
Step 1: Press POWER to turn on the unit
and it will begin to read the disc as follows:
If there is no disc, the display will show:
Step 2: Press EJECT, the disc inside will
pop out automatically.
Playing Disc
This unit will begin to play after reading
the disc.
Press to pause playback.
To return to playback, press again.
Press to choose the previous track or
chapter.
Press to choose the next track or
chapter.
Press to search forward at different
rates. The player will search the track
at 2, 4, 8, and 20 times of the normal speed.
-10-
Press to search backward at different
rates. The player will search the track
at 2, 4, 8, and 20 times of the normal speed.
DVD
VIDEO
READ
DVD
VIDEO
DVD
VIDEO
OPEN
NO DISC
DVD
VIDEO
PLAY
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
Pause
PREV
Next
F.FWD

-11-
Press to stop playback.
DISPLAY
Display
Display
Subtitle
7.1. Basic Operations
7.1.1. Display
During playback, pressing DISPLAY on
the remote control will show the
following:
For DVD disc:
The first time DISPLAY is pressed, the
play time of the chapter will show.
The second time DISPLAY is pressed,
the language, subtitle and angle
information will show.
For DVD, Super VCD disc:
Pressing DISPLAY, the single track play
time, track number and PBC will show.
7.1.2. Subtitle
Press SUBTITLE repeatedly to select
subtitle language. (Up to 32 different
languages, only for discs with this
function.)
Language
7.1.3. Language
Press LANGUAGE repeatedly to select
audio language, up to 8 different audio
languages. (4 for SVCD/CVD discs and
only for discs with this function.)
During playback, press TITLE to enter
the TITLE menu and select by
pressing or numbers
during DVD playback.
7.1.4. Title
7.1.5. Move Selection
During playback, pressing UP, DOWN,
LEFT, and RIGHT allow the user to easily
select Title, Directory or Menu settings.
\ \ \
\ \ \
Keep pressing
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
F.REV
STOP
Tit le1 /1 Cha pter
En g li s h Cl ose N o
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
Track 3/15
Chin ese
Chin ese
-12-
Repeat
REPEAT
REPEAT WHOLE
DISC
7.1.6. Number Buttons
During playback, press number button
directly to select according to the menu
and begin to play a track or chapter.
7.1.7. PBC Play Mode
PBC ON: can only select menu functions
using PREV and NEXT.
PBC OFF: can select tracks directly by
pressing number buttons during playback
or PREV and NEXT. (This function is
for 3.0 version video CD only)
7.1.8. Repeat
During DVD playback, keep pressing
REPEAT, it will show:
Repeat one chapter
Repeat one title
Repeat (off )
During Super VCD/DVD playback, press
MENU to select PBC OFF, then keep
pressing REPEAT, it will show:
Press REPEAT again to close the Repeat
function.
7.1.9. A-B Repeat
During playback, press [A-B] button once
to set the starting point and again to set the
end point. After setting the points, the
program will repeat between A and B.
Press [A-B] again to cancel the repeat.
7.1.10. Zoom
The DVD player can zoom up to 4 times
to view a dynamic or still picture. Keep
pressing ZOOM up to 1,2,3,4,5,6 times for
2,3,4,1/2,1/3,1/4 times zoom. Pressing for
the seventh time will return to normal
playback. Whilst zoomed in press the
directional buttons to move.
7.1.11 Audio Mode
When playing a VCD, pressing [L/R] can
choose between stereo, left mono, right
mono.
7.1.12. Volume/Mute
Press Volume+/Volume- to adjust the
volume. Press MUTE to turn off the
volume, press again to turn on the volume.
7.1.13. Goto
Press GOTO for selecting chapter/time to
play, use LEFT/RIGHT and numbers to
change, press ENTER to confirm. Press
GOTO at any time to exit.
7.2. DVD Setup Menu
In DVD mode, pressing SETUP, the setup
menu will appear. Use LEFT or RIGHT to
select a setting and then press UP or
DOWN to select one specific function
setting. Press ENTER to confirm. Press
SETUP again to exit.
DVD
VIDEO
Repeat Chapter
DVD
VIDEO
Repeat Title
DVD
VIDEO
DVD
VIDEO
REPEAT
Repeat Close
DVD
VIDEO
REPEAT WHOLE

7.2.1System Setup
System Setup has the following options:
TV SYSTEM, AUTO PLAY,VIDEO,
TV TYPE, PASSWORD, RATING, and
DEFULT.
7.2.1.1 TV System
Press to select. Press ENTER to
confirm. Press SETUP to exit.
(NOTE: If you have chosen NTSC, your
TV system must support NTSC format,
otherwise the screen is in black or white
only)
/
7.2.1.2 Auto Play
This option allows the user to set the Auto
Play function On or Off.
7.2.1.4 TV Type
Use this option to change the display aspect ratio.
7.2.1.3 Video
This has been set to S-VIDEO as default.
7.2.1.5 Password
The default code is 0000, entering this
number to lock or unlock the password
setting, press ENTER to confirm, press
SETUP to exit.
7.2.1.6 Rating
Press to select. Press ENTER to
confirm. Press SETUP to exit.
This setting only works until the password
is open, you can change RATING level
from 1 to 8 (8 means no restriction).
7.2.1.7 Default
Press ENTER to confirm the RESTORE
setting. Press SETUP to exit.
/
-13-
Select this option to change this unit to the
factory default setting.
7.2.2 Language Setup
Language Setup has the following options:
OSD LANGUAGE, AUDIO LANGUAGE,
SUBTITLE LANGUAGE, and
MENU LANGUGAGE.
7.2.2.2 Audio Language
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.2.4 Menu Language
Press to select, Press ENTER to
confirm. Press SETUP to exit.
This function must be supported by the disc.
7.2.3 Audio Setup
Audio Setup has AUDIO OUT and KEY
options.
7.2.3.1 Key
Press to select, Press ENTER to
confirm. Press SETUP to exit.
7.2.4 Video Setup
Video Setup has the following options:
BRIGHTNESS, CONTRAST, HUE,
SATURATION, and SHARPNESS.
7.2.2.1 On Screen Display Language
(OSD Language)
Press to select. Press ENTER to
confirm. Press SETUP to exit.
/
7.2.2.3 Subtitle Language
Press to select, Press ENTER to
confirm. Press SETUP to exit.
/
/
/
/
-14-

7.2.4.1 Brightness
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.4.2 Contrast
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.4.3 Hue
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.4.4 Saturation
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.4.5 Sharpness
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.5 Digital Setup
Digital Setup has the following options:
OP (OUTPUT) MODE,
DYNAMIC RANGE, and DUAL MONO.
7.2.5.1 Output Mode
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.5.2 Dynamic Range
Press to select. Press ENTER to
confirm. Press SETUP to exit.
7.2.5.3 Dual Mono
Press to select. Press ENTER to
confirm. Press SETUP to exit.
/
/
/
/
/
//
/
-15-
MP3 adopts the third audio compression
format of MPEG to compress the audio
signal to 12:1. A disc can record more
than 600 minutes of music or 170 songs
by using MP3 format and its quality is
similar to a CD.
7.3. Playing MP3 Music
Basic Operations
1. Insert the disc, the player will search the
disc for data and show the following:
2. Press and PLAY to select the
submenu. Press to enter the track
menu and press again to select a
track to play. Press PLAY to play this
track or select the track directly in this
submenu by pressing a number button.
/
/
3. Press REPEAT to select Repeat Single
Track, Repeat Directory, Repeat Whole
Disc, or Repeat Off.
Other Functions
During MP3 playback, this unit also has
Mute, Volume Control, Pause, Previous Track,
and Next Track options. The operation is the
same as CD playback.
7.4. Playing JPEG Photos
JPEG (Joint Photographic Experts Group)
is the most popular storage format for
pictures used nowadays. JPEG uses a high
compression ratio, compressing by 15-20
times of the original, the images still
remain in good quality. Its size is small
and can be used flexibly. JPEG is
supported by most photo management
software and is good for photo storage.
This player can decode Picture CDs made
with JPEG code format.
Select pictures using numbers
1. Insert the disc and the player will begin
to search the disc for data, the TV screen
displays as below (It varies for different
disc).
2. Press to select (Audio) or
(JPEG) at the bottom of the screen.
Press PLAY to confirm then you can
select play music or JPEG picture.
3. Press a number to select the photo
collection, for example:
/
Select pictures using
1. Insert the disc, the player will begin to
search the disc for data, a menu will appear
on the TV screen. Press to
select the submenu on the left side of the
screen. Press ENTER or PLAY to confirm.
The TV screen shows the following:
/ / /
-16-
/ / /
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO
DVD
VIDEO

/ / /
2. Press to select the picture
of this submenu, press PLAY to play.
Other Functions
1. When playing JPEG files, pause play
and repeat play can also be performed.
2. When playing JPEG files, press
TITLE/RETURN to return to the menu.
3. During playback, press PREV and
NEXT to select the previous or next
picture.
4. During playback, press to
rotate the picture to up, down, left or
right.
/ / /
.
7.6. USB Port
1. The USB port is compatible with flash
memory, it is not guaranteed that it can
be used with all types of MP3 players.
2. Insert the USB stick to the USB port of
this device.
3. Press DVD/DVB to switch the device to
DVD mode, press DVD/CARD/USB to
select play from USB stick. The files in
the memory stick will show on the screen.
4. Press to select the (Audio)
or (JPEG picture) at the bottom of
the screen and press PLAY to confirm.
Then you can select play music or JPEG
pictures.
5. Pressing number buttons or
can select play files.
6. Other operations are the same as the
JPEG function.
/
/ / /
7.7. Card Reader
1. Insert the SD, MS, or MMC card to the
card slot on the side of the TV.
2. Press DVD/DVB to switch the device to
DVD mode, press DVD/CARD/USB to
select play from card. The files in the
card will show on the screen.
3. Other operations are the same as the
USB function.
7.5. Playing MPEG4 Video
MPEG4 is a video compressing standard
which supports movie playback. The basic
operations are the same as MP3 functions.
8. Digital Freeview TV (DVB-T)
8.1. Turn on the machine
Press the POWER button on the remote
control to turn on the machine.
It will enter the mode that it was when
last turned off.
If it enters DVD mode, please press
DVD/DVB on remote control to switch to
DVB mode. For DVB mode, it will select
the last channel watched. If there was no
last channel watched, or this is the first
time it is powered on, a message will
appear, asking if you want to run the first
time installation wizard.
8.2. First time installation
A message will appear, asking if you want
to run the first time installation wizard.
Upon selecting [YES], a new window will
appear, asking you to select Country and
OSD Language. Use to make
the correct selections. Select [NEXT] and
press ENTER to proceed to the next step.
It will ask if you want to start an Auto
Scan. If select [YES], it will start the scan
automatically, if select [NO], it will exit
setup.
/ / /
Picture 1 Picture 2
Picture 4Picture 3
-17-
8.3. Main Menu
Pressing SETUP will enter the main menu,
pressing SETUP again or RETURN will
exit the menu.
In the Main Menu, press to select
Channel Guide, System Config,
Installation, or Game submenu, press
or ENTER to enter the submenu setting.
/
Picture 5 Picture 6
Picture 8Picture 7
8.3.1 Channel Guide
Press to select TV Channels,
Radio Channels, Channels Class,
Channels Edit, and Book List Options,
press ENTER to confirm.
/
8.3.1.1 TV Channels
Upon entering the TV Channels menu, the
channels are listed on the left side of the
screen, and a preview window is on the
right side. The channel can be changed
using , press DISPLAY
to sort the channels, press ENTER to start
watching TV in full screen.
/
Picture 9 Picture 10
8.3.1.3 Channels Class
From the Channels Class menu, each
channel can be classified into a group.
Press ENTER if you wish to add any
channels to a column category, press
ENTER again to cancel. Press RADIO
button to switch to radio channels, press
RADIO again to switch back to TV
channels.
Picture 11
8.3.1.2 Radio Channels
Upon entering the Radio Channels menu,
the channels are listed on the left side of
the screen, and as they are radio channels,
the default screen picture of this TV will
appear in the preview window on the right
side. The channel can be changed using
, press DISPLAY to sort the
channels, press ENTER to start listening
to the radio.
/
Picture 12
8.3.1.4 Channels Edit
To edit a channel's name, press to
move to the channel, press ENTER to
confirm, press to select a character,
press to change the character,
press ENTER to confirm the change.
To change the channel's display sequence,
press to move to the channel, press
to move the cursor to the MOVE
column, press ENTER to confirm, press
to move the cursor to the row you
prefer, press ENTER to confirm.
To delete a channel, press to move
to the channel, press to move the
cursor to the DELETE column,
press ENTER to confirm, press ENTER
again to cancel. Press RETURN or
SETUP to exit.
Press RADIO button to switch to radio
channels, press RADIO again to switch
back to TV channels.
/
/
/
/
/
/
/
/
-18-
Picture 13

8.3.2 System Config
Press to select TV Setting,
Video Setting, Audio Setting, Language,
Parent Control, Time Setting, and System
Info Options, press ENTER to confirm.
/
8.3.2.1 TV Setting
The TV Setting has the following options:
TV System, Video, and TV Type. Press
to move the cursor to one of the
options, press to change the setting,
or press ENTER to change the setting.
Press RETURN or SETUP to exit.
/
/
Picture 14
8.3.2.2 Video Setting
The Video Setting has the following
options: Brightness, Contrast, Hue, and
Saturation. Press to move the cursor
to one of the options, press to
change the setting, or press ENTER to
change the setting. Press RETURN or
SETUP to exit.
/
/
Picture 15
8.3.2.3 Audio Setting
This function is not available yet.
8.3.2.4 Language
The Language menu allows the user to
change the OSD Language. Press
to change the language, or press ENTER
to change the setting. Press RETURN or
SETUP to exit.
/
Picture 16
8.3.2.5 Parent Control
The Parent Control menu has two options:
Change Pin and Channel Lock. When
selecting Change Pin, the user will be asked
to enter the Old Pin, New Pin and the New
Pin again. In order to change the Channel
Lock, the user will be asked to enter the
password (pin) first, if the password is
correct, the Channel Lock menu will appear.
Use to select a channel, press
ENTER to lock or unlock the channel.
Press RADIO button to switch to radio
channels, press RADIO again to switch
back to TV channels. Press RETURN or
SETUP to exit.
/
Picture 17 Picture 18
Picture 20
Picture 19
-19-
The system default password is 0000.
Picture 21
8.3.3 Installation
Press to select Auto Scan,
Manual Scan, and Default Setup Options,
press ENTER to confirm.
/
8.3.3.1 Auto Scan
In Auto Scan, press to select
your country, press to move to Start
Scan, Press ENTER to start.
/
/
Picture 22 Picture 23
8.3.3.2 Manual Scan
In Manual Scan menu, a scan can be
performed by setting the following options:
Country, Scan Type, Start Channel, End
Channel. If the Scan Type is Signal
Channel, only the Country and Start
Channel can be set. If the Scan Type is
Channel Range, the Country, Start Channel,
and End Channel can be set. Use
to select the options and to change
the settings. Once finished with the settings,
move to Start Scan and press ENTER to start.
/
/
Picture 24
8.3.3.3 Default Setup
A message box will appear, asking if you
want to reset the machine to factory
default settings. After the reset, the first
time installation message will appear.
Picture 25
8.3.4 Game
There are three games in the Game menu.
Press to select the game you want
to play, press ENTER to confirm. The
games are played using
button. Press RETURN or SETUP to exit
the game.
/
/ / /
Picture 26 Picture 27
Picture 28 Picture 29
-20-
8.3.2.6 Time Setting
TIME ZONE: If you changed the country
whilst searching for channels, you cannot
adjust the time zone. Restore to factory
settings, and don't search for channels.
Access the TIME ZONE menu, then press
ENTER, a menu will show, use UP or
DOWN to select the time zone you are
and press ENTER to confirm.
8.3.2.7 System Info
System Info displays the firmware version
and date, along with tuner and model
information.

9. Analogue TV
Press TV/AV on the remote control to switch to the Analogue TV mode.
Press MENU, use and to select and adjust.
//
Press MENU
once
BRIGHT
CONTRAST
COLOR
ENGLISH
AUTO-SEARCH
SEARCH
FINE
BAND
POSITION
SKIP
S-COLOR
S-SYS
SWAP
0~100
0~100
0~100
Other language options
48MHz ~ 860MHz
UHF / VHFL / VHFH
0 ~ 254
ON / OFF
AUTO / PAL /SECAM
DK/ I / L / BG
0
Press MENU
twice
Press MENU to exit.
1. Auto Search Start from Program NO .0.
2. When the signal is received under Manual Search, the indication
frequency will stop, which is the optimum position for signal storage.
If the signal is too weak, the system will automatically identify it as no
signal.
3. In the case of picture without any sound, please check the Sound System
for correct setup first.
4. If the input signal is not strong enough, please adjust the “Fine” option,
it may improve the picture and sound quality.
If the signal is too weak, the image will remain poor whatever you do, and
may output loud noises, shaky images and inferior sound etc., which is
not the TV's fault. If the image remains poor when using the telescopic
antenna, please try to use a roof top aerial or an amplified external antenna.
-21-
10. AV Input
Press TV/AV on the remote control to switch to AV In mode.
Press MENU, use and to select and adjust.
Other language options
Press MENU to exit Menu.
Press MENU
once
-22-
/ /
If there is no built-in battery in your product, please skip this page.
11. Battery Charging
1. The lithium battery is built into this machine.
Charge time: 5 hours.
Playback time: 1.5 hours
2. To charge, connect the supplied AC adaptor to the socket marked
“DC IN+13.8V”.
If the indicator becomes red, the battery is charging.
If the indicator becomes green, the battery has been fully charged.
3. To run the unit from the battery, remove the power supply from the
“DC IN+13.8V” and set the ON/OFF switch on the machine to ON.
4. Use only the supplied power adaptors with this device. Failure to do so can
cause damage to the device and risk personal injury.
DC IN+13.8V

-23-
5. Please ensure the device is turned off when not in use. If the battery has not
been used for some time (6 months) then full charge the battery to ensure
maximum battery life.
6. The replacement of the built-in lithium battery must be undertaken by the
manufacturer or an authorised service provider. It may otherwise cause
damage to the device.
Problems listed below do not necessarily signify a fault with the unit.
Please check this list before requesting repairs.
Problems
12. Troubleshooting
No picture and no sound
Check the connection with the AC adapter/Car Adapter.
Use of an unauthorized power supply.
Power switch on the side of the TV is off.
TV is on standby as it was switched off by pressing
the POWER on remote.
Check the channel selection. Scan for channels again.
Always re-scan for channels in new locations. Ensure the
video cable is not damaged. Ensure video settings are
correct.
Check the sound volume. If you are using earphones, test
them on another item. Check that the cable is plugged in.
Sound System is not correctly set in Analogue TV mode.
Possible Causes and Solutions
Picture freezing, and/or
sound distorting
Signal too weak, please check the aerial. Try to use a
proper roof top aerial or amplified aerial.
No signal
Signal too weak, please check the aerial. Try to use a
proper roof top aerial or amplified aerial.
Please adjust Brightness and/or Contrast settings.
Dark Picture
Motors/Trains/High Voltage Lines and Neon Lights may
affect the signal.
Snowstorm effect
Achromatic/Flashing/No Colour Please adjust the Colour Setting.
S-Color is not correctly set in Analogue TV mode.
No sound
No image
-24-
No user serviceable components are fitted inside this TV. Do not attempt
any repairs, as this will invalidate the warranty. Any repairs must be carried
out by either the manufacturer or their nominated service centre. Parts
inside this set are subject to high voltage.
These operation instructions are only intended for reference. No further
notice is available to any modification of all information contained therein.
Due to continuing improvements, the features and designs are subject to
change without notice.
Notice

-25-
13.Technical Parameters
Product Name: 11inch digital and analogue LCD TV with built-in DVD
player, card reader and USB port
Disc Format: DVD/DVD-R/DVD-RW/DVD+RW/DIVX (MPEG4)/SVCD
/VCD/ MP3/WMA/CD/CD-R/CD-RW/JPEG.
MPEG4: 4 and 5 versions without QPEL and GMC
AC / DC Adaptor: AC 100~240V - 50~60Hz
DC adaptor ＋12~24V (car cigaretter lighter)
Picture Resolution: ≥ 500 Line
Video S/N Ratio: ≥ 60dB
Frequency Response: fs 96KHz: 4Hz - 44KHz: +/- 1dB
Audio S/N Ratio: ≥ 90dB
Dynamic Range: ≥ 90dB
Harmonic Distortion: ＜ 0.01%
D/A Converter: 96KHz / 24bit
Video Output Level: 1Vp - p( 75ohm)
Audio Output Level: 1.0V±0.1V
UHF: 474MHz ~ 858MHz
DVB Decode Standard: MPEG2 ISO/IEC 13818 MPEG2 MP@ML
ATV Receiving Channel: DK/I 49.75MHz ~ 855.25MHZ
BG 48.25MHz ~ 855.25MHz
ATV Sound System: DK I BG L
Screen Size: 11 inches
Audio Output: 0.3W (Max)
Loudspeaker: two 40mm round loudspeaker.
Outer Dimension: 290 x 210 x 61mm
Weight: (1) about 1840g with battery; (2) about 1620g without battery;
Dot Matrix: 0.1000 (H) x 0.3000 (V)
Resolution: 800 x RGB x 480
Response Speed (ms): R:30 / F:50
Visible Angle: u:50 / D:60, R/L: 60
Brightness: 300cd/m
Contrast: 150:1
2
Warranty
This product is guaranteed for twelve months from the date of the original purchase. In
the unlikely event of any defect arising due to faulty materials or workmanship, the unit
will be either replaced or repaired free of charge (where possible) during this period. An
alternative product will be offered in case the product is no longer available or repairable.
This warranty is subject to the following conditions:
The warranty is only valid within the country where the product is purchased
The product must be correctly installed and operated in accordance to the instructions
given in this user manual.
The product must be used solely for domestic purposes.
The warranty only covers the main unit, and does not cover the accessories.
The warranty does not cover the damage caused by misuse, negligence, accident
and natural disaster.
The warranty will be rendered invalid if the product is resold or has been damaged
by inexpert repairs. The manufactures disclaim any liability for incidental or
consequential damages.
Please consult our customer adviser before returning any product; we are not
responsible for any unexpected product returns.
Any faulty product must be kept and returned in the original packaging with all the
accessories and the original copy of the purchase receipt.
The warranty is in addition to, and does not diminish, your statutory or legal rights.
Please note:
1.A LCD display panel comprises a very large number of pixels and each pixel contains
three sub-pixels - red, green and blue. Due to the complex manufacturing process,
occasional pixel anomalies may occur. Pixel anomalies cannot be fixed or repaired and
can happen at any stage in the LCD's life. August product should not be deemed as
faulty if there are no more than three bright and dark pixels respectively.
2.Portable TV antennas included in the box are for people to watch Freeview TV in areas
where the signal is strong and there may be difficulty to receive Freeview TV signal by
the included portable antennas in some areas where the signal is not sufficiently strong.
This is due to that the Freeview service in the UK is yet fully operating. August TVs
should not be deemed as faulty if it can receive Freeview by connected to a proper
rooftop aerial.
Customer Service:
Telephone: [phone]
Email: [email protected]
-26-