August DVB-T320 User manual

DVB-T230
EN
DE
August International Ltd
United Kingdom
Tel: [phone]
www.augustint.com
USB Freeview (HD) TV Receiver
USB DVB-T2 Digital TV Empfänger

Thank you for buying this August product. You may already
be familiar with using similar products but please take the
time to read these instructions carefully. They are designed to
familiarise you with the product’s many features and to ensure
that you get the very best from your purchase.
Safety
In order to ensure your safety and the safety of others, please
read the Safety Instructions before using this product.
Disposal
Please ensure the product and its accessories are disposed of
in compliance with WEEE (Waste Electrical and Electronic
Equipment) Directive and any other applicable regulations.
Please check with your local authority for regional disposal
regulations.
Customer Service:
Should you need support with this product, please contact our
Customer Service Centre:
Telephone: [phone]
Email: [e-mail]
Declaration of Conformity
The Declaration of Conformity can be found on our
website at http://augustint.com/en/declaration/
1.Introduction-------------------------------------------1
2.Hardware Connection-------------------------------3
3.How to install Driver and Software----------------4
4.Frequently Asked Questions-----------------------12
5.Warranty---------------------------------------------14

/10
Support MPEG1/2/4, H.264 and H.265
-1- -2-

3. How to install Driver and Software
Visit our website and download the files in the Download
section.
Please download 'Driver' for driver installation and 'TotalMedia'
for software installation.
Ensure that you download the files that are compatible with your
operating system.
3.1 Driver installation
1. Plug the device into a USB port.
2. Find the downloaded driver file named 'Driver-DVB-T230'.
3. Right click on the file, then select 'Extract all'.
4. Follow the introductions to finish the extraction, then a folder
named 'Driver' will appear and open automatically.
5. Run the ‘Setup' application.
6. Follow the on screen instructions to finish installing the
driver.
-3- -4-
Step 1:

Step 3:
Step 2:
-5-
Step 4:
Step 5:
-6-

-7- -8-
Step 2:
Step 3:
3.2 Software installation
1. Find the downloaded software file named 'TotalMedia-DVB-
T230'.
2. Right click on the file and select 'Extract all'.
3. Follow the instructions to complete the extraction process,
then a folder called 'TotalMedia' will appear.
4. Run the 'Setup' application.
Follow the instructions on screen to finish installing the
software. You can find the product key on the back of
this user manual
Step 1:

Step 7:
Step 4: Step 6:
-9- -10-
Step 5:

Step 8:
-11- -12-
4
4
4
4
4

4.8
4
4
4
-14--13-
This product is in compliance with the essential requirements and other
relevant provisions of Directive 2014/30/EU. The Declaration of
conformity may be consulted online at
http://www.augustint.com/en/declaration.
5