Aura Light Sorbus User manual

INSTRUCTION
MANUAL
Model
: Aura Sorbus
Connecting
Joint
DC Socket—
Plastic Nuts
The
lampshade is able
to
rotate at angles shown above and the
connecting rod
can be adjusted up and down.
OPERATING INSTRUCTION
7. The lamp is designed to operate on
220 V-240
V—50/60Hz
current only
2. Adjust the height of the connecting rod by
using
a
sultable coin
to
turn and
loosen/ - - —
tighten the
lampshade/connectingjoint.
3. Connect the
power supply connector to the DC socket and power supply plug to the
wallsocketoutlet.Switch on the wallsocketoutletswitch.
4. Touch Sensor Control Panel:
(1) Controls operation ofthe lamp just bya touch.
(2) Turn On orOffthe lamp.
(3) -
.- Brightness leve! can
be
adjusted by Ute dimming function.
(4) Each lighting mode
(j
working,
ca
Reading, Co[fee and C Sleeping) has its own
unique pre-set leve! of brightness
and colour temperature.
(5)
Lighting Colour Tone:
a. Cool White - Working Mode and Reading Mode
b. Warm White - Cottee Mode and
Sleeping Mode
(6) Lighting Memory Function: When the lamp is switched on each time, it wiIl always operate at the same
mode/brightness
set
[rom itslastprevious operation.
Lampshade
Joint—_
Lampshade
Light source
— Connecting Rod
USB Charge
Touch Sensor
Control Panel
Base
I
Working rnode
re
Reading model
Coffeemodel
C
Sleeping
model
More bfightness
Jens
brightness
0
Switch
LAMP
ROTATING FUNCTION
\

SPECIFICATION
MODEL OUTPUT VOLTAGE OUTPUT
AMPERE POWER
AuraSorbus
DC24V 750mA
10W
LED LAMP THE PREFERRED
CHOICE
Eye Care - No UV rays. Reduces eye fatique, which sometimes may lead to tearing
from
eyes
and headaches.
Flicker-Free - The LED lamp is made to be flicker-ftee, thus reducing eye
disturbance whlle reading.
Glare
Reduction - Reduces direct and reflective glare on reading materials. Provides optimal lighting,
thus makes reading, working and playing mote enjoyable and
comfortable.
Longet Lifespan - With LED technology LED bulb is made to last
longer than normal light bulb or
lluorescent light
tube.
CAUTION
ii
Do not usa the lamp in damp nr Do not touch the light tobe when Do not use solvents, abrasives, nr li not using the lamp for an -
dusly environmont. the lamp is torned on. 111gb aerosol cleaners to clean the lamp; extendodperiod oftime, unplog
temperatore can caoso barns nr discolor may occors. the power sopply plug (rom the
injurios.
nutlet.
0
]—_f
(—2o
Do not remove the sover nr mndi(y Do not place lamp noar bot
object Do not noe Iho lamp near
Ihe lamp in any way. 111gb voltages nr in direct sunlight.
ilammable nbjects nr matorials.
San C0050 fire nr electric shocks.
A
Do not damage the powor cord, Do not nverload the power outlet
place il near any bot objects, and extension cord.
bend It excessively, twist it, pull it,
place
heavy objects on top o(it nr
wrap It into a
bundle.
TROUBLE SHOOTING
7.Ifthe lamp does not
tutn on:
a. Make sute
the power supply plug is securely plugged
into the wall outlet or
the power supply
b. Make sure
the power supply connector & DC
socket ate connected.
2.1! the lamp does not
tutn on afteryou perform the above steps,
send it to the authorized
service
centre for
examination and repair.
Å
Do not attempt to
take apatt or modify the lamp
in
any
way. Doing so could cause
the risk of
serious
injury or death from electric shock or
fire, and it will void your
warranty.
Technical
Product Specification
Do not
noe
the lamp il the power
onpply cord or plug
is damaged.
Send Il to the authorized
service
centre for esamination and
repair.