Austin Hughes Electronics UltraView AP-W19 User manual

UM-UV-621-W19-Q215V2 www.austin-hughes.com
User Manual
dedicated LCD display solutions
Designed and manufactured by Austin Hughes
NAP-W19
Aluminum front bezel
OP-W19
Universal Mounting Open Frame
AP-W19
19” Widescreen LCD
Front NEMA4 / IP65

UM-UV-621-W19-Q215V2 www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-UV-621-W19-Q215V2 www.austin-hughes.com
< Part. 4 > Options
4.1 Option Table
4.2 3G / HD / SD-SDI Broadcast-grade input
4.3 MCS Multi-display control solution
4.4 AV2.2D Upgrade : DVI-D, S-Video + BNC & Audio
AV2.2H Upgrade : HDMI, S-Video + BNC & Audio
4.5 AV3.0 Upgrade : HDMI, DVI-D, S-Video + BNC & Audio
4.6 Resistive / Capacitive ( single point touch )
4.7 DC Power : 12V / 24V / 48V / 110 ~ 125V
4.8 MIL-type or lockable connector
4.9 Quad display for CCTV
4.10 TV ( Analog )
P.13
P.14
P.15
P.16 - 17
P.18
P.19 - 20
P.21
P.22
P.23
P.24 - 25
< Part. 3 > Specifications / OSD
3.1 Product Specifications
3.2 On-screen Display Operation ( OSD )
< Part. 1 > AP-W19 / NAP-W19
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Mounting Hardware & Installation
Contents
P. 1
P.2 - 3
P.4 - 5
< Part. 2 > OP-W19
2.1 Package Content
2.2 Structure Diagram & Dimension
2.3 Mounting Hardware & Installation
P. 6
P.7 - 8
P.9
P.10 - 11
P.12

UM-UV-621-W19-Q215V2 www.austin-hughes.com
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4

UM-UV-621-W19-Q215V2 www.austin-hughes.com
< 1.1 > Package Content - AP / NAP-W19
P. 1
< Part 1 >
19" Widescreen LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
AP-W19 / NAP-W19
Mounting hardware X 1 pack
- Mounting bracket x 4 pcs
- M4* 6mm screw x 8 pcs
- M4* 50mm screw x 8 pcs
AV3.0 upgrade I/O with advanced features
- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio
- On-chip Faroudja® DCDi Cinema processing
Audio
Power
out - in - in
Video PC
VGA
HDMI
S-VideoBNC
AV2.2H upgrade I/O
Basic I/O
AV2.2D upgrade I/O
Power VGADVI-D
Audio
Power
out - in - in
Video PC
VGADVI-DS-VideoBNC
Audio
Power
out - in - in
Video PC
VGADVI-D
HDMI
S-VideoBNC

UM-UV-621-W19-Q215V2 www.austin-hughes.com
19" Widescreen LCD Display
Rear case
LCD panel
Protective 3mm glass
6mm aluminum front bazel
Audio speaker ( for HDMI, Audio or TV option )
LCD membrane
Remote sensor
1
2
3
4
5
6
7
7
Front view
1
2
3
4
Rear view
6
< 1.2 > Structure Diagram - AP / NAP-W19
AP-W19
NAP-W19
P. 2
5
Model Product Dimension
(W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
508.5 x 65.6 x 338.1 mm
20 x 2.6 x 13.3 inch
662 x 115 x 533 mm
26.1 x 4.5 x 21 inch
7 kg
15.4 lbs
10 kg
22 lbs
AP-W19
NAP-W19

UM-UV-621-W19-Q215V2 www.austin-hughes.com
P. 3
Front View Side View
Rear View
< 1.2 > Dimension - AP / NAP-W19
AP-W19
NAP-W19
UNIT : mm
1mm = 0.03937 inch
Bottom View

UM-UV-621-W19-Q215V2 www.austin-hughes.com
19” Widescreen LCD Display
< 1.3 > Panel Mount Installation - AP / NAP-W19
P. 4
1
x 4 pcs
Mounting
bracket x 8 pcs
M4*6mm screw
2 3
x 8 pcs
M4*50mm screw
Hardware set part no. UV-BK#2
■Install 4 mounting brackets with 8 x M4*6mm screws
■Adjust the LCD panel with 8 x M4*50mm screws and fix it on the surface.
Steps

UM-UV-621-W19-Q215V2 www.austin-hughes.com
< 1.3 > VESA mount Installation - AP / NAP-W19
M4 screw
P. 5
■Hardware and M4*4 pcs for VESA mount are not provided
VESA mount ( 100*100mm )

UM-UV-621-W19-Q215V2 www.austin-hughes.com
19” Widescreen LCD Display
< 2.1 > Package Content - OP-W19
P. 6
< Part 2 >
19" Widescreen LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
OP-W19
AV3.0 upgrade I/O with advanced features
- An abundance of input connections that include HDMI, DVI-D, VGA, S-Video + BNC and audio
- On-chip Faroudja® DCDi Cinema processing
Audio
Power
out - in - in
Video PC
VGA
HDMI
S-VideoBNC
AV2.2H upgrade I/O
Basic I/O
AV2.2D upgrade I/O
Power VGADVI-D
Audio
Power
out - in - in
Video PC
VGADVI-DS-VideoBNC
Audio
Power
out - in - in
Video PC
VGADVI-D
HDMI
S-VideoBNC

UM-UV-621-W19-Q215V2 www.austin-hughes.com
Rear case
LCD panel
Audio speaker ( for HDMI, Audio or TV option )
Universal open frame mounting
LCD membrane
Extended remote sensor membrane cable
( 66cm from AD board to sensor end )
1
2
3
4
5
6
6
< 2.2 > Structure Diagram - OP-W19
Front view
1
2
Rear view
5
OP-W19
4
3
P. 7
Model Product Dimension
(W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight
OP-W19 505.5 x 59.6 x 335.1 mm
19.9 x 2.3 x 13.2 inch
662 x 115 x 533 mm
26.1 x 4.5 x 21 inch
5.5 kg
12.1 lbs
8.4 kg
18.5 lbs

UM-UV-621-W19-Q215V2 www.austin-hughes.com
19” Widescreen LCD Display
P. 8
Front View Side View
Rear View
< 2.2 > Dimension - OP-W19
OP-W19
UNIT : mm
1mm = 0.03937 inch
Bottom View

UM-UV-621-W19-Q215V2 www.austin-hughes.com
M4 screw
< 2.3 > Installation - OP-W19
P. 9
( I) Universal mount
( II ) VESA mount ( 100*100mm )
Hardware and M4*4 pcs for VESA mounting are not provided

UM-UV-621-W19-Q215V2 www.austin-hughes.com
19” Widescreen LCD Display
Regulatory Safety FCC & CE certified
Environmental RoHS2 & REACH compliant
Mechanical
Design AP / NAP-W19 OP-W19
Front Panel Black, RAL 9005 -
Rear Casing Black, RAL 9005 Black, RAL 9005
VESA Mounting 100 x 100mm 100 x 100mm
Other Mounting Panel mount Universal mount
Protection 3mm protective glass -
LCD
Panel Manufacturer
Panel Size ( diagonal ) 19-inch Widescreen TFT color LCD
Display pixel ( dots x lines ) 1440 x 900
Brightness ( typ. ) 300
Contrast Ratio ( typ. ) 1000:1
Color 16.7 M
Viewing Angle ( L/R/U/D ) 80/80/80/80
Response Time ( ms ) 5
Dot pitch ( mm ) 0.2835
Display Area ( mm ) 408.24H x 255.15V
Surface treatment Haze 25%, Hard-coating
Surface hardness 3H
Backlight Type CCFL
MTBF ( hrs ) 50,000
Video
Connectivity Analog VGA Analog 0.7Vp-p
DVI DVI-D, TMDS single link
Power Power Supply Range Auto-sensing 100 to 240VAC,
50/60Hz
Power Consumption Screen display ON 25W or less
Power saving mode 4W or less
Power button OFF 1W or less
Environmental
Conditions Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Storage Temperature -5 to 60°C degree
Humidity 5~90%, non-condensing
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
< 3.1 > Product Specifications
P.10
< Part 3 >

UM-UV-621-W19-Q215V2 www.austin-hughes.com
Physical
Specification AP / NAP-W19 OP-W19
Product ( W x D x H ) 508.5 x 65.6 x 338.1 mm 505.5 x 59.6 x 335.1 mm
20 x 2.6 x 13.3 inch 19.9 x 2.3 x 13.2 inch
Packing ( W x D x H ) 662 x 115 x 533 mm 662 x 115 x 533 mm
26.1 x 4.5 x 21 inch 26.1 x 4.5 x 21 inch
Net Weight 7 kgs / 15.4 lbs 5.5 kgs / 12.1 lbs
Gross Weight 10 kgs / 22 lbs 8.4 kgs / 18.5 lbs
Applicable
Format VGA Input PC Signal 1440 x 900 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P. 11

UM-UV-621-W19-Q215V2 www.austin-hughes.com
19” Widescreen LCD Display
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
P.12
< 3.2 > On-screen Display Operation ( OSD )

UM-UV-621-W19-Q215V2 www.austin-hughes.com
( 1 ) The AD board will be upgraded to version 3.0, and this comes standard with HDMI, DVI-D,
VGA, S-Video, BNC, audio inputs and RC-1 remote controller.
***
( 1 ) For AV2.2 upgrade, either HDMI or DVI-D is provided.
( 2 ) If the user needs HDMI and DVI-D, AV3.0 upgrade can be applied.
*
About SDI
About HDMI and DVI-D
( 1 ) AV2.2 upgrade comes with RC-1 remote controller.
( 2 ) TV option comes with RC-2 remote controller.
*Remote Controller
Options AP / NAP OP
SDI ***
HDMI * or DVI-D
S-Video * + Composite ( BNC )
Audio
Touchscreen
MCS multi-display control
DC Power
MIL-type / lockable connector
Quad display
TV ( Analog ) *
< 4.1 > Option Table
P.13
< Part 4 > Options

UM-UV-621-W19-Q215V2 www.austin-hughes.com
19” Widescreen LCD Display
*** For SDI option, the AD board will be upgraded to AV3.0, and this comes standard with HDMI, DVI-D,
VGA, S-Video, BNC, audio inputs and RC-1 remote controller ( please refer to P.17 )
Audio
Power
out - in - in
Video PC
VGADVI-D
HDMI
S-VideoBNC
SDI
out - in
Austin Hughes’ SDI input is an ideal solution for the broadcast-
grade video and high resolution CCTV market.
Designed for use with UltraView Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, Austin Hughes provides a
SDI input module without using additional space or power and it
comes standard with a 2-year warranty.
< 4.2 > Options : 3G / HD / SD-SDI input
P.14
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance
75 ohm coaxial cable 3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s

UM-UV-621-W19-Q215V2 www.austin-hughes.com
Audio
Power
out - in - in
Video PC
VGADVI-D
HDMI
S-VideoBNC
Link
MCS
inoutset
For the 1st and last display,
push the set switch upward
Set switch
For other daisy chain displays,
push the set switch downward
LINK OUT IN OUT
RS-232C
Cat5 / 6 cable
max. 300 meters
up to 64 displaysDaisy chain up to 1,000
meters and 64 displays
RJ-45 jack
IN OUT IN OUT
Cat5 / 6 cable
max. 300 meters
Cat5 / 6 cable
max. 300 meters
15 feet serial cable
( over 15 feet, extender required )
*** Please download the protocol of MCS control at :
http://www.austin-hughes.com/support/usermanual/ultraview/UM-UV-MCS.pdf
< 4.3 > Options : MCS
P.15
More control is always good. Especially when it is necessary and
easy. Austin Hughes provides MCS solution to control the OSD of
various UltraView LCD display up to 64 units.
The RS-232C is used for the communication between the PC and
the first display via a 15 feet serial cable while the CAN bus is
used for the various LCD displays cascade together via CAT 5/6
cable, and daisy chain up to 1,000 meters.
Designed for use with UltraView LCD displays, Austin Hughes
provides a MCS input module without using additional space or
power and it comes standard with a 2-year warranty.
MCS
( Multi-display Control )