Austro Engine E4 Series User manual

Installation Manual
E4 Series
E4.02.01
IM-TR-MDC-E4-487
Issue Date: 14-Mar-2019
IM-TR –Air Intake System
COVERPAGE
TEMPORARY REVISION
IM-TR-MDC-E4-487
IM-TR-Air Intake System
This Temporary Revision IM-TR-MDC-E4-487 is approved in conjunction with the
Design Change Advisory MDC-E4-487 and is valid in conjunction with the latest
revision of the Maintenance Manual (IM) until this Temporary Revision has been
incorporated into the IM.
The limitations and information contained herein either supplement or, in the case of
conflict, override those in the IM.
The technical information contained in this document has been approved under the
authority of DOA ref. EASA.21J.399.
Doc. Nr.
Affected Section(s)
Affected Page(s)
E4.02.01
8.3.2
8-2a
Instruction:
-Print this document on yellow paper (single-sided)
-Insert this cover page as the first page of the IM
-Insert the other pages of this Temporary Revision adjacent to or in front of the
corresponding IM pages

Installation Manual
E4 Series
E4.02.01
IM-TR-MDC-E4-487
Issue Date: 14-Mar-2019
IM-TR –Air Intake System
8-2a
8.4.1 Requirements for the Hose System
The following text is added after the caution:
The hose system in the pressurized area must be designed to minimize the transmission of forces to
the turbocharger as a result of air pressure.