AuthenTrend ATKey.Pro User manual

Quickstart Guide

Contents
Overview
Set up your
ATkey
Add / Remove Fingerprints

ATKey.Pro Overview
Click-able
button
Fingerprint
sensor
Keycod
eTri-color LED
S/N
Click-able
button
A FIDO2-certified, side-mounted fingerprint security key that enables
passwordless authentication in less than a second from any angle.

What the LEDs mean
Blue LED ON
Green LED ON
Red LED ON
Blue LED flashes
Cyan LED flashes
White LED flashes
Power ON
Need to verify fingerprint
Fingerprint verification
success
Fingerprint verification fail / Erase fingerprint / Reset key
Need to
touch
Standalone enrollment (flashes from slow to
fast)
Green LED flashes
Cyan LED ON Device has not yet recognized this
key
Verify fingerprint to start 'Standalone Enrollment'
(If there is any registered fingerprint)

Blue LED ON
Green LED ON
Red LED ON
Blue LED flashes
Power ON
Need to verify fingerprint
Fingerprint verification
success
Fingerprint verification fail

Set up your ATKey and enroll fingerprints first
There are serval available tools that can be used for set up security keys.

Key Setup
- Windows built-in Security Key Manager

Open Windows Settings
Availability: In Windows 1903 and above.
"Settings" > "Accounts" > "Sign-in options" > "Security Key"

Set the PIN of ATKey
Add "Security key PIN" first, the PIN will write into ATKey.Pro.

Add Your Fingerprint
Set up "Security Key Fingerprint", type-in PIN code and

Key Setup
- Chrome built-in Security Key Manager

Open Chrome Settings
Availability: In the latest Chrome browser in ChromeOS, macOS and Linux core system.
"Settings" > "Privacy and security" > "Manage security keys" > chrome://settings/securityKeys
Privacy and Security
Security
Manage security keys

Set The PIN and Fingerprints of ATKey
You can manage PIN, fingerprints, and credentials inside the key.
Create a PIN first and start to add your fingerprints.

Add Your Fingerprint
After finish adding, you can assign the name of
your enrolled fingerprint.

Key Setup
- Standalone Enrollment

Enroll Fingerprints through Standalone Enrollment
•Availability: Power supply from any USB port (Highly recommended to use a power bank)
•Please enroll a fingerprint at the same/similar finger position
With no need for any device or application download.
Tutorial
video
•Insert ATKey.Pro into the USB port.
•LED Cyan ON.
•Press the side button 3 times quickly to get into Standalone
enroll mode.
✓LED White flash: please touch your fingerprint, after
touch, LED turns to Green means this enrollment is good,
LED turns to RED means this enrollment not good.
✓So touch fingerprint at every White Flash, it may need 12
times good enrollments, until LED stays on “Cyan”, then
the enrollment is done.
•If you want to quit "standalone enrollment", press the button and the LED will turn to Blue, back to the normal state.
•If there are any enrolled fingerprints in your ATKey.Pro, LED will Green flash first on step 4, that you need to verify
registered fingerprint to start enrolling new finger.

Powered by
Enjoy your biometric authentication experience!
Download the user manual from here:

[email protected]
www.authentrend.com/atkey-pro
Questions?
Let us know!