Autonics LP-S044 User manual

© Copyright Reserved Autonics Co., Ltd. i
USER MANUAL

ii © Copyright Reserved KONICS Co., Ltd.

Preface
© Copyright Reserved Autonics Co., Ltd. iii
Preface
Thank you very much for selecting Autonics products.
Please familiarize yourself with the information contained in the Safety Precautions section
before using this product.
This user manual contains information about the product and its proper use, and should be kept
in a place where it will be easy to access.

User Manual Guide
iv © Copyright Reserved Autonics Co., Ltd.
User Manual Guide
Please familiarize yourself with the information in this manual before using the product.
This manual provides detailed information on the product's features. It does not offer any
guarantee concerning matters beyond the scope of this manual.
This manual may not be edited or reproduced in either part or whole without permission.
A user manual is not provided as part of the product package. Please visit our home-page
(www.autonics.com) to download a copy.
The manual's content may vary depending on changes to the product's software and other
unforeseen developments within Autonics, and is subject to change without prior notice.
Upgrade notice is provided through our homepage.
We contrived to describe this manual more easily and correctly. However, if there are any
corrections or questions, please notify us these on our homepage

User Manual Symbols
© Copyright Reserved Autonics Co., Ltd. v
User Manual Symbols
Symbol Description
Supplementary information for a particular feature.
Failure to follow instructions can result in serious injury or death.
Failure to follow instructions can lead to a minor injury or product damage.
An example of the concerned feature's use.
※1 Annotation mark.

Safety Precautions
vi © Copyright Reserved Autonics Co., Ltd.
Safety Precautions
Following these safety precautions will ensure the safe and proper use of the product and
help prevent accidents and minimize hazards.
Safety precautions are categorized as Warnings and Cautions, as defined below:
Warning Cases that may cause serious injury or fatal accident if
instructions are not followed.
Caution Cases that may cause minor injury or product damage if
instructions are not followed.
In case of using this unit with machinery (Ex: nuclear power control, medical equipment,
ship, vehicle, train, airplane, combustion apparatus, safety device, crime/disaster prevention
equipment, etc) which may cause damages to human life or property, it is required to install
fail-safe device.
It may cause a fire, human injury or property loss.
Do not use the Logic Panel where serious physical damage or production halt can be
caused.
It may cause a fire, human injury or property loss.
In case using the Logic Panel touch switch for controlling, do not use the switch as an
emergency switches or those related to safety that may cause physical injury or property
damage in the event of a malfunction..
It may cause a fire, human injury or property loss.
In the event of LP defect or malfunction in the Logic Panel, an alternative circuit must be
constructed on the exterior.
It may cause a fire, human injury or property loss.
Construct an emergency power-off circuit, safety circuit, or interlock circuit on the exterior of
the Logic Panel.
It may cause a fire, human injury or property loss.
If an error occurs on the watchdog timer of the Logic Panel, the logic program will shut
down automatically, so an alternative circuit must be constructed on the exterior.
It may cause a fire, human injury or property loss.
The overall system operation may malfunction due to an input error resulting from a failure
in input signal detection; so an alternative circuit must be constructed on the exterior.
It may cause a fire, human injury or property loss.
For output signals that may cause a serious accident if the output section is damaged, a
detection circuit and alternative circuit must be constructed on the exterior.
It may cause a fire, human injury or property loss
In case controlling other devices through Logic Panel communication, and there is a
possibility of malfunction due to communication error, an alternative circuit must be
constructed.
It may cause a fire, human injury or property loss.

Safety Precautions
© Copyright Reserved Autonics Co., Ltd. vii
When switching the mode to RUN mode, make sure that supply power to LP, I/O unit and
load first. If not, output error or miss-operation may cause.
It may cause a fire, human injury or property loss.
Do not use the product in an area or an environment not specified in the manual.
It may cause a fire, human injury or property loss.
Do not connect, inspect or repair this unit when power is on.
It may cause electric shock or a fire.
Do not disassemble the product. Please contact us if it is required.
It may cause electric shock or a fire.
Please use the rectified power with insulation trans.
It may cause electric shock or a fire.
Do not use the power to the exceeded rated voltage.
It may cause electric shock or a fire.
This product uses lithium battery, do not disassemble or burn up it.
It may cause an explosion or a fire.
Wire properly after checking power terminal polarity.
It may cause a fire or a malfunction.
Please read all notes and cautions related to installation and wiring in the manual.
It may cause electric shock or malfunction.
Make sure the ground wire of Logic Panel is wired separately from the ground wires of other
devices. Ground resistance must be less than 100Ω, and a lead wire of which sectional
area is over 1.25mm2should be used.
It may cause electric shock or malfunction.
When connecting Logic Panel ports with communication port and constructing input/output,
check the pin number and terminal block before connecting.
It may cause a fire or malfunction.
Please tighten bolt on terminal block with specified tightening torque.
It may cause a short circuit, fire or a malfunction.
Do not press the surface of the touch panel with sharp or hard objects.
The touch panel may be damaged.
Keep Logic Panel at the specified temperature.
If stored at a temperature beyond the specification, LCD may be broken.
Do not inflow dust or wire dregs into the unit.
It may cause a fire or a malfunction.
Do not use in an area with excessive humidity or temperature.
It may shorten the life cycle of this unit or cause a malfunction.
Do not close ventilating opening of this product.
It may cause a malfunction due to increased inner temperature.
Keep the product out of direct sunlight or excessive dust.
It may shorten the life cycle of this unit or cause a malfunction..

Safety Precautions
viii © Copyright Reserved Autonics Co., Ltd.
Do not use or store in a place with shock or vibration.
It may shorten the life cycle of this unit or cause a malfunction.
When liquid crystal from the broken LCD is smeared with skin, wash it for 15 minutes.
If liquid crystal enters your eyes, flush it for15 minutes and consult a medical specialist for
more instructions.
In cleaning the unit, do not use water or organic solvent. And use dry cloth.
It may cause electric shock or a fire.
Please separate as an industrial waste when discarding this unit.
To change the battery, contact the store or an authorized technician.
The manufacturer is not liable for damages that occur due to causes for which the
manufacture is not responsible, regardless of manufacturer’s prediction about customer’s
opportunity loss and damage from the unit malfunction, damages due to extraordinary
situations, secondary damages, compensation for accident, damages on other product, and
compensation for other process.
Note that this device is KCC certified for commercial use. Make proper applications for the
product.
※The specifications and dimensions of this manual are subject to change
without any notice.

Table of Contents
© Copyright Reserved Autonics Co., Ltd. ix
Table of Contents
Preface iii
User Manual Guide...............................................................................................................................................iv
User Manual Symbols........................................................................................................................................... v
Safety Precautions.................................................................................................................................................vi
Table of Contents..................................................................................................................................................ix
1Overview....................................................................................................13
1.1 Logic Panel............................................................................................................................................. 13
1.2 Feature of LP......................................................................................................................................... 14
1.3 Ordering information........................................................................................................................ 15
1.4 Specification.......................................................................................................................................... 16
1.4.1 General specification..................................................................................16
1.4.2 Performance specification..........................................................................17
1.4.3 LP basic specification.................................................................................18
1.5 Communication ................................................................................................................................... 19
1.5.1 Communication interface ...........................................................................21
1.6 Part description ................................................................................................................................... 21
1.7 Dimensions ............................................................................................................................................ 22
2Installation.................................................................................................23
2.1 LP installation ....................................................................................................................................... 23
2.2 Power wiring ......................................................................................................................................... 24
2.2.1 Ground wiring
.............................................................................................25
2.2.2 Input wiring.................................................................................................26
2.2.3 Output wiring.............................................................................................. 27
2.3 Battery replacement .......................................................................................................................... 28
2.4 Caution for using................................................................................................................................ 28
3Device Construction.................................................................................29
3.1 Device element.................................................................................................................................... 29
3.2 Device range......................................................................................................................................... 31
3.2.1 Bit device range .........................................................................................31
3.2.2 Word device range.....................................................................................32
3.3 Application of UW, UB corresponding...................................................................................... 32
4System Organization ................................................................................33
4.1 Stand-alone ........................................................................................................................................... 33
4.2 Connection with controller............................................................................................................. 34
4.2.1 1:1 organization..........................................................................................34
4.2.2 1:N organization.........................................................................................35
4.2.3 Heterogeneous organization......................................................................36
4.3 Universal organization...................................................................................................................... 37
4.4 Connect with barcode, printer...................................................................................................... 38

Table of Contents
x © Copyright Reserved Autonics Co., Ltd.
4.5 Operation mode ..................................................................................................................................39
4.5.1 Change operation mode.............................................................................39
4.6 Program processing procedure ....................................................................................................40
4.7 Connect with GP Editor....................................................................................................................41
4.7.1 GP Editor configuration ..............................................................................42
4.8 Connect with SmartStudio..............................................................................................................43
4.8.1 LP configuration .........................................................................................43
4.8.2 SmartStudio configuration..........................................................................43
5Start up LP .................................................................................................45
5.1 Checking list before supplying power.......................................................................................45
5.2 Operation order ...................................................................................................................................46
6System Screen ..........................................................................................47
6.1 Organization of system screen .....................................................................................................47
6.2 Operation of system screen ...........................................................................................................48
6.3 Monitoring..............................................................................................................................................49
6.3.1 Device monitor ...........................................................................................49
6.3.2 I/O monitoring.............................................................................................49
6.4 Set Environment ..................................................................................................................................50
6.4.1 Language ...................................................................................................50
6.4.2 PLC setting.................................................................................................51
6.4.3 Clock...........................................................................................................55
6.4.4 Clear USER DATA......................................................................................55
6.4.5 Menu call key .............................................................................................56
6.4.6 Buzzer ........................................................................................................56
6.4.7 Opening time..............................................................................................57
6.4.8 Backlight.....................................................................................................57
6.4.9 Battery........................................................................................................58
6.4.10 Contrast......................................................................................................58
6.5 Data View................................................................................................................................................59
6.5.1 Base screen ...............................................................................................59
6.5.2 Window screen...........................................................................................59
6.5.3 Comment....................................................................................................59
6.5.4 Memory size...............................................................................................59
6.5.5 Model & Version.........................................................................................60
6.6 Set Function...........................................................................................................................................61
6.6.1 Time switch ................................................................................................62
6.6.2 Print out......................................................................................................63
6.7 Set parameter .......................................................................................................................................64
6.7.1 Filter............................................................................................................64
6.7.2 Interrupt......................................................................................................65
6.7.3 4 X 4 keypad ..............................................................................................66
6.7.4 7 segment display ......................................................................................67
6.7.5 Synchronous serial.....................................................................................69
7User Screen...............................................................................................71
7.1 Screen specification ...........................................................................................................................71

Table of Contents
© Copyright Reserved Autonics Co., Ltd. xi
7.2 Screen display object........................................................................................................................ 72
7.3 Screen switching ................................................................................................................................. 73
7.4 Overlap window function................................................................................................................ 74
7.5 Device connection status display................................................................................................ 76
8System Window ........................................................................................77
8.1 Keypad type .......................................................................................................................................... 77
8.2 Keypad organization ......................................................................................................................... 78
9Troubleshooting........................................................................................79
10 Firmware update .......................................................................................81
10.1 Firmware update by GP Editor ..................................................................................................... 81
10.2 Firmware update by SmartStudio ............................................................................................... 83
11 Repair and Check......................................................................................85
11.1 Battery change..................................................................................................................................... 85
11.2 Check........................................................................................................................................................ 86
11.2.1 General check............................................................................................86
11.2.2 Periodic check............................................................................................86
12 Appendix....................................................................................................89
12.1 Self-diagnosis code table................................................................................................................ 89
12.2 ASCII code table.................................................................................................................................. 90
12.3 UW correspondence table.............................................................................................................. 91

Table of Contents
xii © Copyright Reserved Autonics Co., Ltd.

1Overview
© Copyright Reserved Autonics Co., Ltd. 13
1Overview
1.1 Logic Panel
Logic Panel (after referred to as LP) is the integrated device with HMI(Human Machine Interface)
and PLC(Programmable Logic Controller) functions as one.
It is vary effective to display visual interface about connected device’s stauts and to control
connected devices conveniently without additional device at limit space.
LP monitors control variables visually by LCD screen, switches the screen, sets the variable
value by touching a touch screen, and controls the device directly by output port. The other
controllers from LP is connected by serial communication and it is able to exchange mutual
information.
The variable for controller is displayed by various methods as tag which is graphic object. For
example, if the physical variable for monitoring is temperature, LP displays temperature as
numeral by numeral input tag, or as trend graph with changes by time. LP screen consists of
these graphic objects combinations.
GP Editor which is dedicated software for user defined screen data and SmartStudio which is for
user defined data help create program and draw or edit screen. After editing screen data such as
tag form, arrangement, and attribution in GP Editor, download these to LP and LP starts to
monitor by screen data. You can programming PLC logic and monitor the operation in
SmartStudio.

1Overview
14 © Copyright Reserved Autonics Co., Ltd.
1.2 Feature of LP
Compact structure
LP realizes as one with power, PLC, HMI, I/O modules.
Logic specification
LP has 8000 step program capacity.
It supports 28 basic instructions and 233 application instructions.
Wide device range
LP supports auxiliary device 10K Word, data device 10K Word and other several devices.
Variable external I/O than equivalent product
LP supports input 16 points/ output 16 point basically. (Terminal block connector, ribbon
cable connector)
Expansion function; external interrupt, matrix, 7Segment, synchronous communication, etc.
Supports expansion function; external interrupt, matrix 16 key input, 7 Segment output,
synchronous communication output, etc.
Space saving and simple wiring
Automation system with LP series saves install space and provides simple wiring.
Cost saving for install and maintenance
Automation system with LP series saves cost and time for install and maintenance.
Product upgrade by web site
We offer LP firmware, GP Editor, SmartStudio, protocol, language and font, various
manuals at www.autonics.com to download conveniently.
Monitoring function of other type controller
By PLC connection port, LP monitors and controls the variable of additionally connected
controller (PLC, etc).
Communication between heterogeneous controllers
You can connect other type controller to serial port separately.
LP monitors two different controllers simultaneously and relays communication between two
controllers.
Multi monitoring function
You can connect same type of several controllers.
Supports multilingual
LP supports Korean, English and the other languages are available for the later.
Supports several font
LP supports various bitmap font and vector font. You can select the desired font and use it.
Multi communication port
LP supports several communication port such as RS232C /RS422 serial communication
port, USB HOST USB DEVICE, and Ethernet.
Two serial ports of RS232C / RS422 are designated for the device connecting by software
(PLC, computer, printer, barcode reader, etc). By supported communication type of
connected device, select port to communication.
Monitoring function for controller device
Without designed data, LP menu is available for monitoring connectable controller device.
Printer and barcode reader connection

1Overview
© Copyright Reserved Autonics Co., Ltd. 15
You can print alarm list by connecting printer.
It is able to read barcode by connecting barcode reader.
Touch interface
It is able to input value in controller with touch switch on front screen.
1.3 Ordering information
Model LP-S044-S1D0-
C5T-A
LP-S044-S1D0-
C5R-A
LP-S044-S1D1-
C5T-A
LP-S044-S1D1-
C5R-A
화면크기 4.4inch
표시장치종류 STN LCD
표현 색상수 MONO(Blue, White)
전원전압 24VDC
인터페이스 RS232C, RS422C 각1 개RS232C 2 개
모듈형태 일체형
I/O 구성 IN: 16 점, OUT: 16 점
I/O 커넥터타입 터미널 블록
커넥터
리본케이블
커넥터
터미널 블록
커넥터
리본케이블
커넥터
확장기능타입 Type A 지원

1Overview
16 © Copyright Reserved Autonics Co., Ltd.
1.4 Specification
1.4.1 General specification
Model LP-S044-S1D0-C5T(R) LP-S044-S1D1-C5T(R)
Power supply 24VDC
Allowable voltage range 90 to 110% of power supply
Power consumption Max. 3.6W
Serial interface Each of RS232C, RS422
(Asynchronous method)
Two of RS232C
(Asynchronous method)
Real-time controller RTC embedded
Battery life time 3 years at 25℃
Insulated resistance Min. 100MΩ(at 500VDC megger)
Ground 3rd grounding(Max. 100Ω)
Noise immunity The square wave noise (Pulse width 1㎲) by the noise simulator
with ±0.5kV
Withstanding voltage 500VAC (50/60Hz) for a minute
Vibration
Mechanical 0.75mm amplitude at frequency of 10 to 55Hz (for a minute) in each
of X, Y, Z directions for an hour
Malfunction 0.5mm amplitude at frequency of 10 to 55Hz (for a minute) in each
of X, Y, Z directions for 10 minutes
Shock
Mechanical 300m/s2 (30G) X, Y, Z directions for 3 times
Malfunction 100m/s2 (10G) X, Y, Z directions for 3 times
Environ
ment
Temperature 0 to 50℃, Storage: -20 to 60℃
Humidity 35 to 85% RH, Storage: 35 to 85% RH
Protection IP65F(for front panel)
Accessory Fixing bracket: 4 pcs, waterproof rubber ring, battery (included)
Approval
Unit weight※1Approx. 454g (Approx. 312g)
※1: The weight in parentheses is only unit weight.
※Environment resistance is rated at no freezing or condensation.

1Overview
© Copyright Reserved Autonics Co., Ltd. 17
1.4.2 Performance specification
Display performance
LCD type STN Blue Negative
Resolution 240 X 80 dot
Display area 112.8 X 37.6mm
Color MONO(Blue, White)
LCD view angle Within each 30°of top/bottom/right/left
Backlight White LED
Brightness Adjustable by software
Graphic drawing performance
Language ※1Korean, English, Japanese, Chinese, Russian, Vietnamese,
Portuguese
Text
▪High resolution display up to 400 characters
▪6X8, 8X8 ASCII character, high quality view of numbers
▪8X16 ASCII character, 16X16 regional characters (1 to 8 times
bigger for width, 0.5 to 5 times bigger for height)
Graphic drawing memory 384kB
Number of user screen 500 pages
Touch switch Width 15 X Height 4 = Total 60
Control performance
Instruction Basic instruction: 28, Application instruction: 220
Program capacity 8K step
Processing time Average: 6 to 7㎲/step
I/O control type Batch processing
Operation control mode Repeated-doubling method, interrupt processing
Device range Refer to ’3.2 Device range’
Interface
Communication interface LP-S044-S1D0-C5T(R): Each of RS232C, RS422
LP-S044-S1D1-C5T(R): Two of RS232C
Input specification
Output specification
Input point 16 points Output point 16 points
Insulation method Photo coupler
insulation Insulation method Photo coupler
insulation
Voltage range 19.2 to 28.8VDC Voltage range 19.2 to 28.8VDC
Rated input voltage 24VDC Power supply 24VDC
Rated input current Approx. 4mA Max. load current 0.1A/1point, 1A/1COM
Input resistance 5.6 ㏀Max. voltage falling when
ON Under 0.2VDC

1Overview
18 © Copyright Reserved Autonics Co., Ltd.
Response time 1ms Response time 1ms
Common method 16 points / 1COM Common method 16 points / 1COM
1.4.3 LP basic specification
Function Description
MONITORING
DEVICE MONITOR Monitors connected PLC device and changes the status
I/O MONITORING Monitors I/O state of LP-S044
SET
ENVIRONMEN
T
LANGUAGE Designates system language and character set
PLC SETTING Configures serial port for connecting between Editor and
connected device, printer, barcode reader, or monitor
CLOCK Designates current time and date
CLEAR USER
DATA Deletes GP DATA and LP DATA
MENU CALL KEY Designates the position for calling system setting menu
BUZZER Designates using buzzer or not
OPENING Set time for open screen when supplying power
BACKLIGHT Set off time for backlight as screensaver
BATTERY Displays battery remaining with percentage (%) and bar
graph
CONTRAST Adjusts LCD screen contrast
DATA VIEW
BASE SCREEN Displays user-defined base screen title and number
WINDOW SCREEN Displays user-defined window screen title and number
COMMENT Displays downloaded comment list in LP
MEMORY SIZE Displays total memory capacity and available memory
capacity
MODEL &
VERSION Displays current version of LP series and model name.
SET
FUNCTION
DATA TRANSFER Displays this menu during communicating
(download/upload) between LP and GP Editor
TIME SWITCH Designates time switch
PRINT OUT Prints out alarm history with printer
SET
PARAMETER
FILTER Displays input filter value
INTERRUPT Displays external interrupt setting of input contact
4 X 4 KEYPAD Displays the data for controlling 4X4 keypad
7 SEGMENT
DISPLAY Displays the data for controlling 4 digit segment

1Overview
© Copyright Reserved Autonics Co., Ltd. 19
Function Description
SYNCHRONOUS
SERIAL Displays the data for synchronous serial setting
1.5 Communication
Depending on PLC model type, connections for PLC are different, therefore refer to ‘GP, LP
user manual for communication’.
Every device such as PLC is able to connect any RS232C or RS422 port.
CH1, CH2 is designates in GP Editor.
Connection of 1 PLC
Connect PLC to a port and one of PC, printer, barcode reader to the other port.
Connection of CH1 and CH2
Connect PLC to LP ports.
It is able to connect even if CH and CH2 are not same type PLC, LP can relay data
exchange between CH1 and CH2 according to configuration.

1Overview
20 © Copyright Reserved Autonics Co., Ltd.
Connection of plural PLCs
It is able to connect same device type to CH1 and CH2 as up to 32 by each.
In this case, LP can link data between CH1-1 to CH1-n and CH2-1 and CH2-n and it is able
not to use CH1 or CH2.