Avacom H60 Series User manual

1
H60 Series H.264 IP Cameras
Quick Start Guide
Installation & Configuration Guide
With USATechnical Support & Warranty Information
AVACOMTECH INC. www.avacomtech.com

2
Hardware Installation
Please check to see that you have the following:
1. H602x or H608x device
2. Antenna (H608xW/AW only)
3. Ethernet cable
4. 12V power adapter
5. Mounting bracket and screws
6. CD-ROM with setup software
You will also need:
1. A computer with a CD-ROM drive or active Internet connection
2. A WiFi router with at least one other available Ethernet port
3. A screwdriver
Preparation for Plug＆Play Installation or Network/WiFi settings
1. Connect Ethernet cable between the camera and your router or WiFi router
2. Connect the antenna to camera (optional)
3. Connect the 12V power adapter to camera and plug it into a power outlet

3
Android/iPhone/iPad APP Plug & Play Installation
1. Make sure your Android phone, iPhone or iPad has installed Barcode Scanner APP
2. Scan below QR code to install APP on Android or iPhone/iPad
Android APP iPhone/iPad APP
3. Scan S/N QR code, the S/N QR code can be found on box or camera

4
Android/iPhone/iPad APP Plug & Play Installation
3. For Android phone, select “Local Login” , select “By Serial Number”, scan S/N QR
code on camera or box, select “channel 1” to play the video
You can also register an account and use the account to login to different devices

5
Android/iPhone/iPad APP Plug & Play Installation
4. For iPhone/iPad, select “By Device” , select “Add”, scan S/N QR code on camera or
box, then select the camera to play the video

6
Search Camera IP Address (optional)
1. Search camera IP address on Android or iPhone/iPad
Android: iPhone:
2. Search for the camera IP address on Windows XP/7
Run DeviceManager on the CD, click “IP search”
DeviceManager is a Windows 32bit software and may not be compatible with Windows 8/8.1

7
Setup Internet Explorer Compatibility View (optional)
1. Enter the camera IP address in the Windows Internet Explorer address bar
Add the IP address to Compatibility View Settings if Windows blocks the IP address

8
Setup Fixed Network IP Address (optional)
1. Enter DeviceCfg->Network menu on WebUI, change RJ45 port to fixed IP if needed

9
Setup WiFi Password or IP address (optional)
1. Enter DeviceCfg->NetService menu on WebUI, change WiFi settings if needed

10
View Video from Windows IE, Safari, Firefox, Chrome(optional)
1. Enter camera IP address on Windows IE, select main steam or extra stream, enable
QuickTime to play the video
2. For Safari / Firefox / Chrome , select SubStream, enable QuickTime to play the video