AVE ATM Interface TCPIP232 User manual

February 2013
ATM TCP/IP Interface
Stand alone or with VSSI-Pro/VSI-Pro/VSI-Pro MAX
POS TCP/IP Interface
Stand alone or with VSI-Pro /VSI-Pro Max
TT
TT
TCPIP232CPIP232
CPIP232CPIP232
CPIP232
POS /POS /
POS /POS /
POS / AA
AA
ATMTM
TMTM
TM AdaAda
AdaAda
Adapterpter
pterpter
pter
OPERATION MANUAL

AVE Multiview UK
Endeavor House 3rd Floor
Coppers End Rd.,Stansted,
Essex, CM24 1SJ, UK
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.multiview.net
AVE Thailand Co., Ltd.
147 Soi On-Nut 44
Sukhumvit 77 Rd., Suan Luang
Bangkok 10250,Thailand
Tel: [phone]
Fax: [phone]
Email: [email protected]
http://www.ave.co.th (Thai)
http://www.avethailand.com (English)
AVE Multiview USA
2300 Central Parkway Suite C
Houston, Texas, 77092
Tel: [phone]
Fax: [phone]
Email: [email protected]
http://www.americanvideoequipment.com
AVE Europe LTD
123 Millennium Business Park
Ballycoolin, Dublin 15, Ireland
Tel:[phone] Fax: [phone] Email; [email protected] Website: www.ave-europe.eu
TCPIP232
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE
THE COVER. DO NOT EXPOSE THE EQUIPMENT TO
RAIN OR MOISTURE. NO USER SERVICEABLE PARTS
ARE INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTION!
RISK OF ELECTRICAL SHOCK!
Copyright C AVE Thailand Co., Ltd. 2000-2012
WARNING!
THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RA-
DIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED
IN ACCORDANCE WITH THE INSTRUCTION MANUAL MAY
CAUSE INTERFERENCE TO RADIO COMMUNICATIONS. IT HAS
BEEN TESTEDAND FOUND TO COMPLY WITH THE LIMITS FOR
A CLASS A COMPUTING DEVICE PURSUANT TO SUBPART J
OF PART 15 OF FCC RULES, WHICH ARE DESIGNED TO PRO-
VIDE REASONABLE PROTECTION AGAINST SUCH INTERFER-
ENCE WHEN OPERATED INACOMMERCIAL ENVIROMENT. OP-
ERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS
LIKELY TO CAUSE INTERFERENCE IN WHICH CASE THE USER
AT HIS/HER OWN EXPENSE WILL BE REQUIRED TO TAKE
2

CONTENTS
BOOTMENU.................................................................................................................................5
ITCPIP232ATM/POS...................................................................................................................7
TCPIP232Connections.................................................................................................................7
TCPIP232HardwareConfiguration.............................................................................................9
TCPIP232Setups...........................................................................................................................10
StandAloneSetup.............................................................................................................10
TCP/IPSETTINGS.............................................................................................................10
INFORMATIONSETTINGS...............................................................................................11
INTERFACESETTING.......................................................................................................11
TIMESYNCSETTINGS....................................................................................................12
SENSE.............................................................................................................................12
TRANSACTIONALARM.....................................................................................................12
FILTERTYPE......................................................................................................................12
WATCHDOGTIMER...........................................................................................................12
TCPIP232Connecting DiagramandSetting .........................................................................14
TCPIP232ConnectingwithATM..............................................................................14
TCPIP232 Connecting withPrinter..........................................................................16
TCPIP232ConnectingwithNCRACS........................................................................18
TCPIP232ConnectingDiagram with FilterTypeSettingasDUMP.......................20
TCPIP232Connecting withCashRegister Express(CRE)....................................25
TCPIP232 Connectingwith GilbracoPassport.....................................................30
TCPIP232 Connectingwith INFOGENESIS.........................................................32
TCPIP232 Connectingwith DIGISM 5500...............................................................34
TCPIP232MicrosVSS3700UDPInterface................................................................................36
TCPIP232MicrosVSS3700 Connections................................................................................36
TCPIP232MicrosVSS3700 Hardware Configuration............................................................37
TCPIP232MicrosVSS3700Setups............................................................................................38
IPAddress/SubnetMask/Gate Way/Port.................................................................38
TXBaudrate...................................................................................................................38
OutputType....................................................................................................................38
WorkstationsSettings.................................................................................................38
VSSI-ProSetup.............................................................................................................................40
VSI-ProandVSI-ProMaxSetup................................................................................................41
IPADDRESSSetup......................................................................................................................41
INFORMATIONDISPLAYSetup.................................................................................................42
TCPIP232LEDIndicators...........................................................................................................42
AVERS485Network.....................................................................................................................42
Cablesand PinAssignments......................................................................................................42
FirmwareUpdate..........................................................................................................................44
TCPIP232Testing.........................................................................................................................46
Warranty..........................................................................................................................................47
3

4
FIGURES
Figure1:StandAloneConnection...............................................................................................7
Figure2:VSSI-ProInterface........................................................................................................7
Figure3:VSI-ProorVSI-Pro Max Interface..............................................................................8
Figure4:AVERS485NetworkInterface.....................................................................................8
Figure5:TCPIP232Silkscreen(Left Corner Back).................................................................9
Figure6:ATM StandAloneTappingModeConnection.........................................................14
Figure7:ATM StandAloneMirror Mode Connection............................................................14
Figure8:ATM with RS485 Network Interface..........................................................................14
Figure9:PrinterStandAloneTapping ModeConnection...................................................16
Figure10:Printerstandalonemirrormodeconnection.......................................................16
Figure11:PrinterwithRS485NetworkInterface....................................................................16
Figure12:NCRACS StandAlone TappingModeConnection...........................................18
Figure13:NCRACS Stand SloneMirrorMode Connection...............................................18
Figure14:NCRACSwithRS485NetworkInterface...............................................................18
Figure15:ATM Dump DataTappingMode Connection.......................................................20
Figure16:ATMDumpDataMirrorModeConnection.............................................................20
Figure17:PrinterDumpDataTappingModeConnection...................................................20
Figure18:Printer Dump DataMirrorMode Connection.....................................................20
Figure19: Cash Register Express Tapping Mode Connection......................................25
Figure 20: Cash Register Express Mirror Mode Connection.........................................25
Figure21: Cash Register Express Client Server SettingRS485 NetworkInterface.....26
Figure22: GilbracoPassportStandSloneTapping Mode Connection...........................30
Figure 23: Gilbraco Passport StandAlone Mirror Mode Connection...........................30
Figure24:GilbracoPassportwith RS485 Network Interface..............................................30
Figure25:INFO GENESISStandAloneTappingModeConnection.................................32
Figure26: INFO GENESISStandAlone MirrorMode Connection....................................32
Figure27: INFOGENESIS with RS485 Network Interface...............................................32
Figure28:DIGISM 5500StandAloneTappingModeConnection.....................................34
Figure29:DIGISM 5500 StandAlone Mirror ModeConnection.........................................34
Figure 30: DIGISM 5500 with RS485 Network Interface..................................................34
Figure 31: TCPIP232 Micros VSS 3700 and Micros Workstation Connection..........36

BOOT MENU
TCPIP232 is able to select upon boot u p to the “TCPIP232 ATM/POS” , “VSS 3700” or
“UPDATEFIRMWARE” byconnecting thePC/DVR cable(021-037-SF).Theconnects from
theTCPIP232 adapterto yourlaptop.Power upthe TCPIP232RS-232Portand yourlaptop
andrunaserial communications program like HyperTerminal at baudrate19200,n,81with
VT100 emulation. Press ESC key (1BH) , [ (5Bh) and S (53H) to enter to the BOOT Menu.
Youwillsee thefollowing“Boot Menu”.
NOTE : When entering into the TCPIP232 VSS 3700 Main Menu while booting the
system if TCPIP232 starts or is listening to a UDP message you can not enter
programming mode until reboot the system again. Therefore disconnect all LAN
cables from the TCPIP232 prior to entering the Boot Menu.
PresstheArrow “UP”or “Down” to move thecursorto the proper menu andtoselect
Pressthe “Enter” key toselect.
TCPIP232 ATM/POS
SelecttheTCPIP232ATM/POSoperating mode by waitinguntiltheCopy
rightmessageappears as below. You will thenbeready to use the
TCPIP232ATM/POS. (refer to page 7 for operations and programming
details)
BOOT MENU
- TCPIP232ATM/POS
- VSS 3700
-UPDATEFIRMWARE
Copyright 2013 byA.V.E. Thailand
TCPIP232 V400R23B1 Feb 14 2013
5

VSS 3700
By selecting the VSS 3700 you will enter to the VSS 3700 operating mode.
Waitfor theTCPIP232to reboot and showthemessageas below.You will thenbereadyto
use the TCPIP232 for the Micros VSS 3700 UDP Interface. (refer to page 36 for operation
andprogrammingdetails)
TCPIP232 Micros VSS 3700
Listening 192.168.2.233 Port 12345
UPDATE FIRMWARE
To enter to the TCPIP232 UPDATE FIRMWARE mode refer to page 44)
6

TCPIP232 Connections
1. Stand Alone with Digital Video Recorder
Thisconnectionwill inteface directlytoa DVR which supportsTextInsertion.This in-
sertion will interface via RS232C from TCPIP232 rear panel.DVR RS232 communication
settingtobe baudrate19200,N,8,1FlowcontrolNONE.SoPleaseconsultyourDVRmanual
orcontacttheDVRmanufacturer.TheTCPIP232 is programmedbya laptop.
TCPIP232 ATM/POS
TheTCPIP232InterfaceisdesignedtocaptureATMorPOStransactionsonaEthernet
LAN system and then convert captrued transactions to a serial port to interface with VSSI-
Pro(ATMSynchronous Serial Interface), VSI-Pro Max orVSI-Protooverlay the text on the
video and export the data in formatedASCII to other devices like a DVR. It also allows full
programmingof the TCPIP232 viaon-screeninterative menu oftheabove devices.
Whenused standaloneor connectedtoaDVR, programmingisdonevia anylaptop running
HyperTerminal or other communications program. Default is MDI/MDIX but can be jumper
configuredforTaporMirrorModes.
7
Figure 2. VSSI-Pro Interface
RS-232
Figure 1. Stand Alone Connection
ATM
Camera
Rounter/Network
Switcher
CAT-5
CAT-5
Video Coaxial
Video Coaxial
Serial
DVR
TCPIP232
Monitor
RS-232
CAT5 LAN
2. VSSI-Pro Interface
The VSSI-Pro also supports text insertion and programmable gray scale and back-
groundof textinsertion.Usersareable todefine theATMIPAddressviaOnscreenprogram-
mingon VSSI-ProMenu.

3. VSI-Pro or VSI-Pro Max Interface
TheVSI-Pro and VSI-ProMaxsupportsTextInsertionand programmablegrayscale
and background of text inesertion and can be programmed via the Onscreen display for
settingtheATMor POS IP in addition to PC Programming of both units.
8
4. AVE RS485 Network Interface
TheAVE RS485 Network is a text and information streaming solution that connects
multiple devices via an RS485 port. There are Master and Slave units forAVE RS485 Net-
worksolution.TheMasterunitisused forpollingthedataof theslavedeviceandsending the
textand information(Alarm,TimeandDate)steaming totheDVR thatsupportsAVERS485
networksolution commonlycalledthe VSI-ADDprotocol.
Camera VideoIN
VideoOUT
ATM
RS232Output
CAT-5 CAT-5
DVR
VSI-Pro/MAX
TCPIP232
Figure 3. VSI-Pro or VSI-Pro Max Interface
Figure 4. AVE RS485 Network Interface
CAM1
CAM1-4INPUT
CAT-5
CAM2
CAT-5
CAM3
CAT-5
CAM4
CAT-5
RS485
RS232
TCPIP232 TCPIP232
TCPIP232TCPIP232
DVR Hydra/VSI-ProMAX Master

TCPIP232 Hardware Configuration:
TCPIP232 hardware operation depends on your network connection. TCPIP232 is
ableto operate with HUBandNetwork Switcher.Thereare 2 hardware configurations:
1. Mirror Mode
ThisMode supports HUBandProgrammable Network Switchers.Theuser needs to
provideaportforTCPIP232tocaptureATMtransactionsontheHUBandneedstomirrorthe
ATMLAN portforTCPIP232porttocapture data.Thiskind of switcher wecalled “program-
mablenetwork switcher”.
2. Tapping Mode
TheTappingmodesupportsHUBandTypicalNetworkSwitcher.TapppingModecap-
tures ATM transactions by tapping receiving data at the ATM or POS only. So HUB and
Switch will not see TCPIP232 as a network device. see Figure 6
Figure 5. TCPIP232 Silkscreen (Left Corner Back)
Tapping Mode Setup. (This is a defualt from manufacturer)
1. Open JP15,JP16
2. JP6 Close 1-2,3-4,5-6,11-12
3. JP18 and JP19 Close 1-2
Mirror Mode Setup
1. Close JP15, JP16
2. JP6 Close 1-2,3-4,5-6,11-12
3. JP18 and JP19 Close 2-3
9

Theusermust be carefultounplug the LAN cablefromtheATMorPOS.TheATM or
POShas theprotection whenthereis nocomunication betweenthe ATMandHostServer in
limitedtime yourATMwill be offlineautomatically. Thisperoid is calledthe“ATMTimeOut’.
Thistime out dependsonyourATMsystem.It is approximately6-10seconds.
Stand Alone Setup
ConnectthePC/DVR cable (021-037-SF) whichcomesfrom the TCPIP232 adapter
toyour laptop. Power upyourTCPIP232 and your laptopandrun serial programlikeHyper
Terminalat baudrate 19200,n,81withVT100emulation. Press ESCkey(1BH), [ (5Bh) and
P(50H) to entertotheMain Menu.
TCPIP232 Setups
10
TCPIP232 SETUP
*TCP/IPSETTINGS
-INFORMATIONSETTINGS
-INTERFACESETTINGS
-TIMESYNC SETTINGS
- SENSE AUTO
- TRANSACTIONALARM OFF
-FILTERTYPE ATM
-WATCHDOGTIMER ON
-EXIT
TCP/IP SETTINGS
IP ADDRESSP ADDRESS
TheIPaddress will be thesameastheATM or POS machine.
DESTINATION PORT
Portnumberofdestination 0 to 65535.
EXIT Exitto mainmenu.
TCPIP SETTING
* IPADDRESS 192.168.0.0
-DESTINATIONPORT ANY
-EXIT
PresstheArrowkey to movethecursor or change theconfigurationsPress the Enterkeyto
selector save theconfigurations.

INTERFACE SETTING
INTERFACE
Selections;Generic,RegCom57600, RegCom9600, Vnet
SelectGeneric ifyouconnect withVSSI-Pro/VSI-Pro/Maxthen selectVSSI-
Pro forTCPIP232 willsend raw datato VSSI-Pro toanalyze the databut the
VSSI-Proisable to use Genericmodeby select TCPIP GENERICwhenyou
programthe VSSI-Pro.
SelectREGCOM57600 or REGCOM9600 orVNETwhen you connectwith
RS485network.Put jumper on JP9(1-2) ,JP10(1-2)andJP11(1-2) for using
AVE RS485 Network.
ID Usewhenyou select REGCOM57600orREGCOM9600or VNET.
EXIT Exitto mainmenu.
INFORMATION SETTING
*INFORMATION0 ON
-INFORMATION1 ON
-INFORMATION2 ON
-INFORMATION3 ON
-EXIT
INFORMATION SETTINGS
INFORMATION
Thisisa user define foradditionalinformationin the transaction to display
specialinformation.
EXIT Exitto mainmenu.
INTERFACE SETTING
*INTERFACE GENERIC
-ID 1
-EXIT
11

TIME SYNC SETTINGS
* DATE FORMAT MM/DD/YY
-TIMESYNC OFF
TIME SYNC SETTINGS
DATE FORMATP ADDRESS
Selectdate formatto beMM/DD/YY,DD/MM/YYor YY/MM/DD
TIME SYNC
Synctimeto the MVDR.
EXIT Exitto mainmenu.
SENSE
Selecttypeof LAN cable for StraightThroughorCross Over cable ifyouselect
AUTOthenTCPIP232will select cabletypeautomatically.
TRANSACTION ALARM
OFF Offtransactionalarmfunction.
MVDRSendserialalarmtothe MVDR everytimethattransaction cause .
FILTER TYPE
Select filter type to beATM , EPSON , NCRACS ,CRE or DUMP
ATM ATMfilter format.Connectingdiagram andTCPIP232setting referto page14.
EPSON
EPSONprinterfilterformat.Defaultportat9100butyoucanchange whatever
youwant.Connecting diagram and TCPIP232settingreferto page 16.
NCRACS
NCRACS-IRfilter format.ConnectingdiagramandTCPIP232setting
refer to page 18.
GENERIC LAN PRINTER
Filterformat for GENERICLANPRINTER. Default portat9100 butyoucan
change whatever you wantConnectingdiagramand TCPIP232settingrefer
to page 16.
DUMPCaptureallethernetRAWdataandsend out toRS-232.Connecting
diagram and TCPIP232 setting refer to page 20.
12

CRE CashRegisterExpress filter format. Connecting diagramand TCPIP232
setting refer to page 25.
GILBRACO PASSPORT
GILBRACOPASSPORTfilter format.Defaultport at 700butyoucan change
whatever you want.Connectingdiagramand TCPIP232 settingreferto
page 30.
INFO GENESIS
INFOGENESIS filter format.Defaultport at7005but you canchange
whatever you want.Connectingdiagram and TCPIP232 settingrefer
to page 32.
DIGISM 5500
DIGISM5500filter format. Connectingdiagramand TCPIP232setting refer
to page 34.
WATCHDOG TIMER
TurnON orOFFwatchdog timerofthe system.
EXITExit from system settingandbacktooperation mode.
13

TCPIP232 VonnectingwithATM
1.Connectingdiagram
Figure 6. ATM Stand Alone Tapping Mode Connection
CAT-5 Video
Serial
DVR
TCPIP232
ATM
Figure 8. ATM with RS485 Network Interface
Figure 7. ATM Stand Alone Mirror Mode Connection
Camera
CAT-5
CAT-5
Video Coaxial
Video
Serial
DVR
TCPIP232
Monitor
ATM
CAM1
CAM1-4
CAT-5
CAM2
CAT-5
CAM3
CAT-5
CAM4
CAT-5
RS485
RS232
TCPIP232 TCPIP232
TCPIP232TCPIP232
DVR Hydra/VSI-ProMAX Master
ATM1 ATM2 ATM3 ATM4
Note : TCPIP232 Tapping Mode and Mirror Mode Setting refer to page 9
14
TCPIP 232 ConnectingDiagramandDetting
Camera Video Coaxial Monitor
Router/
Network Switch
CAT-5
Router/
Network Switch

3.Settingthe IPAddressin TCP/IPSetting Menu tobeanIPoftheATM.
TCPIP SETTING
* IP ADDRESS 192.168.0.0
-DESTINATIONPORT ANY
-EXIT
4. Exit from TCPIP 232 setting and back to operating mode.
5.Tryto make some transactionwith ATMthen transactiondatawill bedisplayon
the monitor screen and store in the DVR.
2. Select TCPIP232 Fiter Type forATM.
TCPIP232 SETUP
-TCP/IPSETTINGS
-INFORMATIONSETTINGS
-INTERFACESETTINGS
-TIMESYNC SETTINGS
- SENSE AUTO
- TRANSACTIONALARM OFF
* FILTER TYPE ATM
-WATCHDOGTIMER ON
-EXIT
15

1.ConnectingDiagram
Figure 9. EPSON or GENERIC LAN PRINTER Stand Alone Tapping Mode Connection
Figure 10. EPSON or GENERIC LAN PRINTER Stand Slone Mirror Mode Connection
Figure 11. EPSON or GENERIC LAN PRINTER with RS485 Network Interface
TCPIP 232 Connectingwith EPSON or GENERIC LAN PRINTER.
Camera
CAT-5
CAT-5
Video
Video
Serial
DVR
TCPIP232
Monitor
EPSON
Printer
Cash
register
Camera
CAT-5
Video
Serial
DVR
TCPIP232
Monitor
EPSON
Printer
Cash
register CAT-5 CAT-5
Rounter/Network
CAM1
CAM1-4
CAM2 CAM3 CAM4
RS485
RS232
TCPIP232 TCPIP232
TCPIP232TCPIP232
DVR Hydra/VSI-ProMAX
Note : TCPIP232 Tapping Mode and Mirror Mode Setting refer to page 9
16
CAT-5
Video
Rounter/Network
CAT-5
Cash
reg1
Printer1
CAT-5
Cash
reg2
Printer2
CAT-5
Cash
reg3
Printer3
CAT-5
Cash
reg4
Printer4
EPSON Printer 1 - 4
Rounter/Network

3.Settingthe IPAddressinTCP/IPsettingmenuto be an IPoftheprinter.
TCPIP SETTING
* IP ADDRESS 192.168.0.0
-DESTINATIONPORT ANY
-EXIT
4. Exit from TCP232 setting and back to operating mode.
5.Tryto makesometransaction with cash registerthentransaction datawillbe
display on the screen and store in the DVR.
2. SelectTCPIP232 Fiter Fype for EPSON orGENERIC LAN PRINTER
TCPIP232 SETUP
-TCP/IPSETTINGS
-INFORMATIONSETTINGS
-INTERFACESETTINGS
-TIMESYNC SETTINGS
- SENCE AUTO
- TRANSACTIONALARM OFF
* FILTER TYPE EPSON
-WATCHDOGTIMER ON
-EXIT
17

TCPIP232 Connecting withNCRACS
1.ConnectingDiagram
Figure 12. NCRACS Stand Alone Tapping Mode Connection
CAT-5 Video
Serial
DVR
TCPIP232
Figure 14. NCRACS with RS485 Network Interface
Figure 13. NCRACS Stand Alone Mirror Mode Connection
Camera
CAT-5
CAT-5
Video Coaxial
Video
Serial
DVR
TCPIP232
Monitor
CAM1
CAM1-4
CAT-5
CAM2
CAT-5
CAM3
CAT-5
CAM4
CAT-5
RS485
RS232
TCPIP232 TCPIP232
TCPIP232TCPIP232
DVR Hydra/VSI-ProMAX Master
Note : TCPIP232 Tapping Mode and Mirror Mode Setting refer to page 9
Camera Video Coaxial Monitor
CAT-5
Router/
Network Switch
NCRACS
NCRACS
NCRACS NCRACS NCRACS NCRACS
18
Router/
Network Switch

3.SettingtheIPAddress inTCP/IPsetting menu to be an IPof NCRACS.
TCPIP SETTING
* IP ADDRESS 192.168.0.0
-DESTINATIONPORT ANY
-EXIT
4. Exit from TCP232 setting and back to operating mode.
5.Tryto make some transactionwithcash register thentransactiondatawill be
display on the screen and store in the DVR.
2. Select TCPIP232 Fiter Type to be NCRACS.
TCPIP232 SETUP
-TCP/IPSETTINGS
-INFORMATIONSETTINGS
-INTERFACESETTINGS
-TIMESYNC SETTINGS
- SENCE AUTO
- TRANSACTIONALARM OFF
* FILTER TYPE NCRACS
-WATCHDOGTIMER ON
-EXIT
19

CAT-5 CAT-5
Serial
TCPIP232
Figure 15. ATM Dump Data Tapping Mode Connection
TCPIP232 Connecting Diagram with Filter TypeSettingasDUMP.
Rounter/Network
Switcher
20
CAT-5
CAT-5
Serial
Figure 17. Printer Dump Data Tapping Mode Connection
Printer
HyperTerminalPC
HyperTerminalPC
1.Connectingdiagram
CAT-5 CAT-5
Serial
TCPIP232
Figure 16. ATM Dump Data Mirror Mode Connection
Rounter/Network
Switcher HyperTerminalPC
CAT-5 CAT-5
Serial
Figure 18. Printer Dump Data Mirror Mode Connection
Rounter/Network
Switcher
HyperTerminalPC
CAT-5
TCPIP232
TCPIP232
Note : TCPIP232 Tapping Mode and Mirror Mode Setting refer to page 9
ATM
ATM
CashRegister
CashRegister