Warranty Information
Please return the enclosed warranty registration card and retain your original purchase receipt and
carton should you require warranty service.
This product is guaranteed against defects in material and workmanship for a period of two(2) years
from the date of purchase or delivery to the original purchaser. During this period, Dynamic Audio
(DA) will replace or repair, at its discretion, without charge for parts or labor, any product that
exhibits such manufacturing defect. DA assumes no liability for incidental or consequent damages
or expenses related to the use or failure of this product. This warranty does not apply to any
product which has been abused or operated in or under conditions exceeding the manufacturer's
claim of serviceability. This is the sole warranty, no other warranty is expressed or implied.
For warranty service, contact the manufacturer at the address or phone number on the back of the
manual for a return authorization. Upon receipt of authorization, return the unit, freight prepaid,
including a copy of the original purchase receipt clearly showing the date of purchase.
Serial Number: Model Number:
Installation and Use
Installation-Mounting the Amplifier
Step1 - Disconnect the positive(+) battery cable before mounting
the amplifier or making any connections. Check the battery
and alternator ground(-) connections. Make sure they are
properly connected and free of corrosion.
Step2 - Choose a mounting location for your amplifier. Find a
location on a flat surface away from heat and moisture.
Be sure the mounting location and the drilling of pilot holes
for mounting will not present a hazard to any wires, control
cables, fuel lines, fuel tanks, hydraulic lines, or other vehicle
systems or components. Common mounting locations are in
the trunk area, or under the front passenger seat
(min. 3 in. clearance). Choose a location with adequate air
circulation. The amplifier will dissipate heat more efficiently if
mounted vertically.
Step3 - Place the amplifier in the mounting location, and mark the
position if the holes with a marker, pen or pencil.
Carefully drill the mounting holes in the marked positions.
Step4 - Use the supplied mounting screw to securely fasten the
amplifier to the mounting surface.
Best - Vertical Mounting
Airflow
Good - Horizontal Mounting
Never Mount Upside Down
Airflow
Check for fuel lines, fuel tanks, hydraulic lines and other
vehicle systems before drilling any pilot holes.
2
