Avista NUMINA User manual

1-1: Screw N with I & J(B 4x)
1-2: Screw M with I & J(B 4x)
1-3: Screw L & K with I & J(A 6x)
*Note: Make sure flat surface holes
are facing upward.
2-1: Screw G into O. 2-2: Screw in A.
2-3: Screw in B.

*Note: Make sure this is
facing upward. Screw in U into P(C 4X)
4-1:Place U ontop of O.
4-2: Screw the bolts C & D together

Insert E into flat surface holes.
*Note: Make sure flat surface holes
are facing upward.
Place Q,R & S onto TV Stand.

7-1: Choose the correct screws from S1-S8 that fit your TV.
(Please refer to your TV user manual for more information.)
7-2: Screw T on back of your TV then hang the TV onto P.
7-3: Place F to secure the TV.
WE HOPE YOU ENJOY YOUR NEW NUMINA TV STAND
THANK YOU FOR CHOOSING AVISTA!!!
IF YOU HAVE ANY QUESTIONS OR CONCERNS,PLEASE CONTACT US AT [phone]