AVP Synthesizer MAD-5 mk2 User manual

www.avpsynth.com
1
AVP Synthesizers
MAD-5 mk2 Midi Analog Drum synthesizer
User Manual

www.avpsynth.com
2
MAD-5 mk2 is an analog drum synthesizer which is inspired by the sounds of the
20th century soviet drum machines while having the flexibility, MIDI control and
compact package of the 21st century. It consists of 22 knobs and 1 button which
allows you to manipulate/control the sound and midi. It also has individual
outputs for each of the five drum instruments so you can easily rout and process
them separately with your external effects especially in a live configuration.
Specification
- The method of synthesis: 100% analog synthesis;
- Drum instruments: 5 - bass drum (BD), snare drum (SD), open hat (OH), close hat
(CH), clap (CL);
- MIDI interface: MIDI IN - 16 channels (MIDI learn), MIDI THRU;
- Audio outputs: one mix output (mono 6.3mm jack) and five individual outputs
(mono 6.3mm jack);
- Trigger inputs: 5 trigger inputs for every drum instrument (mono 3.5mm jack);
- Controls: 22 knobs and 1 button;
- External power supply: adapter 15 VAC (included)*
- Steel case;
- Dimensions: L190хW162хH91 mm;
- Weight: 1.26 kg.
* MAD-5 mk2 operates on 220 volts, if used on 110 volts - a power converter from 220
to 110 volts is required. So if you are in a 110 volts area, please only use it with a power
converter. Without it, the unit will get damaged and will stop functioning.

www.avpsynth.com
3
Controls
Front panel
Rear panel

www.avpsynth.com
4
1. Bass Drum (BD): volume control (LEVEL), pitch control (TUNE), decay control
(DECAY), wave forms control (WAVE);
2. Snare Drum (SD): volume control (LEVEL), pitch control (TUNE), decay control
(DECAY), noise filter control (NOISE), frequency shift control (SWEEP);
3. Open Hat (OH): volume control (LEVEL), cutoff control (FILTER), decay control
(DECAY);
4. Close Hat (CH): volume control (LEVEL), cutoff control (FILTER), decay control
(DECAY);
5. Clap (CL): volume control (LEVEL), pitch control (TUNE), noise/clap balance
(MIX), clap’s attack time control (SPACE), decay control (DECAY), noise filter
control (NOISE);
6. Total volume control (VOLUME);
7. MIDI selection button, MIDI indicator (MIDI);
8. MIDI connection (MIDI IN, MIDI THRU);
9. Total audio output (MIX OUT);
10. Individual audio outputs (INDIVIDUAL OUTS);
11. Trigger inputs (TRIGGERS IN);
12. Power On/Off button (ON), power supply jack (15 VAC).
Connecting MAD-5 mk2
Power (15 VAC adapter): Connect the power adapter to the POWER jack
Audio output (6.3mm jack): In order to connect to a mixer or other audio
interface/equipment, please insert a 6.3 mm mono jack into the MIX OUT of
MAD-5 mk2 or in the INDIVIDUAL OUTS;
MIDI Input: Connect the MIDI OUT port of the sequencer or MIDI keyboard (or
other MIDI device) to the MAD-5 mk2 MIDI IN port.
Setting the MIDI-channel
- In order to set the needed MIDI channel on the MAD-5 mk2 - a MIDI button is
used which is located on the front panel. The 1st MIDI channel is set by default. In
order to change the MIDI channel, you have to hold the MIDI button while
switching the POWER on;
- Indicator MIDI should start to blink;
- From your MIDI device/DAW/Sequencer by which you want to control MAD-5
mk2, you have to send a midi message from a channel that you have assigned (for
example choose channel 2 on your device and press any key on your keyboard).

www.avpsynth.com
5
From there on the MIDI indicator will stop blinking meaning that the desired MIDI
channel has been set. It will be saved in the memory of MAD-5 mk2.
Powering MAD-5 mk2
Set the POWER button located on the rear to On. From that moment on MAD-5
mk2 is ready for action 
Overview of controls
MAD-5 mk2 structure consists of five analog drum instruments sections.
Each of the drum instrument has a volume control (LEVEL).
In the BD section, the TUNE control allows to adjust the pitch tone of the bass
drum, DECAY –decay control.
The WAVE control adjusts the form of the BD wave –from a sine wave form (left
position of the knob) to a square form (right position of the knob). Thus, the
WAVE control allows for quite a flexible sculpting of the BD tone.
In the SD section the TUNE control allows to adjust the pitch tone of the snare
drum, DECAY –to adjust the desired decay, SWEEP –frequency shift (the effect
applies in small proportions, maximum effect peak can be heard when the
positions of the SWEEP and TUNE knobs are turned fully clockwise).
The NOISE control adjusts the filter’s cutoff frequency of the NOISE generator.
In the OH section the FILTER control allows to adjust the cutoff filter, DECAY –
adjusts the desired decay of the open hat.
In the CH section the FILTER control allows to adjust the cutoff filter, DECAY –
adjusts the desired decay of the close hat.
In the CL section the TUNE control allows to adjust the pitch tone, SPACE –the
attack time of the clap. NOISE control adjusts the filter’s cutoff frequency of the
NOISE generator. DECAY control –the desired decay of the clap and MIX control –
the balance between the NOISE generator and a clap.
Note: At high volume settings, the OH and CH can be slightly heard (if pressed or
programmed) in the MIX OUT even with their volume levels at 0, this is due to the
80s type of schematics used which cannot be eliminated, in order to overcome
this we suggest to use the INDIVIDUAL OUTS.

www.avpsynth.com
6
Working with TRIGGERS IN
These inputs allow you to control the drums from external sources that have
pulses with a span of 5 volts and a duration of 2-5 ms.
Working with MIDI
Each of the drum instruments of the MAD-5 mk2 responds by pressing the
respective keys on the MIDI-keyboard, another MIDI trigger device, or when
receiving MIDI data from sequencer. When the drum instruments receive MIDI
control messages, the corresponding indicator lights start flashing.
On the front panel you can also find a MIDI NOTE MAP.
Keyboard layout
Control of drum instruments of the MAD-5 mk2 is triggered by the following
notes:
BD (Bass Drum) –C2 (note «Do» of the second octave);
SD (Snare Drum) –D2, E2 (notes «Re» and «Mi» of the second octave);
OH (Open Hat) –F2, G2 (notes «Fa» and «Sol» of the second octave);
CH (Close Hat) –A2, B2 (notes «La» and «Si» of the second octave);
CL (Clap) –D#2 (note «D-sharp» of the second octave).
Warranty:
The standard warranty on MAD-5 mk2 is for one year from the date
of purchase.
1. The warranty does not apply in the following cases:
- Expiration of the guarantee (after one year from the date of purchase); After-
guarantee servicing is possible, shipping both ways is at the expense of the buyer.
We try to stay reasonable concerning servicing;
- There is any mechanical damage to the inside and/or outside of the unit;
- There are signs of opening or self-repair;
- A malfunction caused by self-updating software, or installing additional
options/mods;
- A malfunction caused by damage of the product by other objects and liquids, as
well as results of fog, rain and snow.
2. The guarantee does not apply to:

www.avpsynth.com
7
- Adapter;
- Controls if their failure was caused by normal wear or contamination during use.
Feel free to email us if you have any questions: [e-mail]
AVP Synthesizers