AVPro Edge AC-CXWP-USBC-T User manual

AC-CXWP-USBC-T, AC-CXWP-USBC-100KIT, AC-CXWP-USBC-70KIT
Wall Plate Transmitters
Quick Start Guide
These single gang, HDBaseT wall plate transmitters are a part of
ConferX’s line of professional audio video products. Installing these
sleek transmitters is a breeze as they are built to t in any standard
single gang mug ring, but their sleek design is only the beginning. The
entire ConferX line of products are built to military grade standards to
ensure stable connections for long periods of time.
Simplify installations in schools, ofces, meeting rooms and huddle
rooms. Once integrated into your client’s system he now has the perfect
solution for sharing information from any computer or source. This
unit is designed to work awlessly with all PC, VESA and traditional
resolutions 4K 60Hz 4:2:0 8-bit & HDR 4:2:2 12 BIT. With the AC-CXWP-
HDMO-T you get a sleek look your client will like, a stable connection
that lasts and a product that works seamlessly with any source you
throw at it.
This quick start guide will be going through:
• AC-CXWP-USBC-T, AC-CXWP-USBC-100KIT, AC-CXWP-USBC-70KIT
• Installation / Recommended Connection order
• Input Switching
•EDID Management
• Troubleshooting
USBC Wall Plate and kits:
• AC-CXWP-USBC-T
• AC-CXWP-USBC-100KIT
• AC-CXWP-USBC-70KIT
AC-CXWP-USBC-T
Power Light/Switch Indicator - turns on once the wall plate is
powered.
Orange LED indicates HDMI, Green LED indicates USB-C.

AC-CXWP-USBC-100KIT
When paired with the AC-EX100-UHD-R3
the wall plates are able to transmit 4K
at 70 meters or 1080P at 100 meters. EDID
management is available on this receiver.
AC-CXWP-USBC-70KIT
When paired with the AC-EX70-UHD-R
the wall plate is able to transmit 4K
at 40 meters 1080P at 70 meters. EDID
management is not available for this
receiver but is still available on the wall
plate.
Installation of the Wall Plate Extenders and connection order:
1) Mount the wall plate in the mud ring.
2) Connect category cable between the Wall Plate and the Receiver*
3) Plug in the power into the Receiver. The Wall Plate Transmitter will
receive power from the receiver through the Cat Cable (POE)**
4) Plug in a HDMI cable from the receiver to the display.
5) Last step: plug in a HDMI from the source to wall plate.
6) Source will now transmit to display.
*If the Cat Cable is connected correctly a solid amber light with a ashing green
light will turn on at the ethernet port. This means there is a good link and that data is
being transmitted between the wall plate and receiver.
**If you will be using the unit directly into a NON POE Provider (AVR,
Projector, Display, or other HDBaseT receiver), you can power it using a 5V MINI

Input Switching:
Each wall plate utilizes auto sensing technology. This means once a source is connected the
wall plate will recognize the connection and automatically send the signal to the display.
For the VGA, MDP & USB-C wall plate: if you already have a source plugged into the wall plate
and you plug in another source the wall plate will automatically switch to the source that
was just put in.
If you have 2 sources plugged into the VGA, MDP & USB-C wall plate you can switch between
the inputs by pressing the square lit up button. A green light indicates that MDP, VGA or USB-C
is being used and an amber colored light indicates that HDMI is selected.
If the active source is unplugged it will automatically switch to the other plugged in source.
EDID Management:
EDID management allows you to manage
the input device (typically the display) to
request specic video resolutions and/
or audio codecs from a source. EDID can
be toggled using the turn dial (Located on
bottom of unit opposite of HDBT port).
Use a athead screwdriver to toggle be-
tween different preset EDIDs by twisting
the dial to the preferred EDID. The following choices are available:
0. 4K60HZ 420 3D 2Ch [Default]
1. 4K60HZ 420 3D 4CH
2. 4K60HZ 420 3D 8CH
3. 4K60HZ 420 HDR BT2020 3D 2Ch
4. 4K60HZ 420 HDR BT2020 3D 6Ch
5. 4K60HZ 420 HDR BT2020 3D 8Ch
6. 4K30HZ RGB 3D 2CH
7. 4K30HZ 444 3D 6CH
8. 4K30HZ 444 3D 8CH
9. 4K30HZ 444HDR BT2020 3D 2CH
A. 4K30HZ 444HDR BT2020 3D 6CH
B. 4K30HZ 444HDR BT2020 3D 8CH
C. 1080P60 RGB 8 BIT 3D 2CH
D. 1080P60 444 3D 6CH
E. 1080P60 444 3D 8CH
F. Copy from output

When using projectors RGB edid setting is recommended.
EDID can be managed using all wall-plate transmitters (VGA, HDMO, MDP, USB-C) and the EX100-
UHD-R3 receiver.
Copying EDID From Output:
With 70-Kits:
• Connect category to TX/RX, HDMI to Display, and both RX and Display are powered
• Turn dial to F on wall plate
With 100-Kits:
• Connect category to TX/RX, HDMI to Display, and both RX and Display have power
• Turn dial to F on RX
Troubleshooting:
Having problems? Here are some general troubleshooting tips that may help:
(We recomend every integrator have the fox & hound troubleshooting kit. That way you have a
denitive answer when having problems with HDMI)
1. Try different HDMI cables. A defective HDMI cable can bring the entire system down.
2. If using short HDMI cables (.5m, 1m) try a longer cable. Some short HDMI cables do not sync
well.
3. Ensure you have the correct EDID settings selected.
4. Re-terminate the Category cable (even if a cable tester indicates that the cable is passing
signal).
5. Avoid RJ45EZ connectors
6. Check the Category cable length. It may be too long.
7. Remove any excess Category cable and be sure that it is not twisted or damaged.
8. If you are still having issues after troubleshooting, feel free to contact our Tech Support
department.
Have a question or need assistance?
Don’t hesitate to contact us!
SUPPORT: [phone]
USA TOLL FREE: 877-886-5112
EMAIL: [e-mail]