AVS AHDSP2 User manual

Input Port
Output Port
Bandwidth
Output Resolution
Operating Temperature
Deep Color
Chassis
Dimension
Weight
Power Supply
SPECIFICATION
1x2 HDMI Splitter
User Manual
1xHDMI(Female connector), 1xUSB
2xHDMI(Female connector), 1xIR Channel
10.2Gbps
480i~1080P@50/60,1080P@24/50/60,
VGA~UXGA,4K x2K@30
-15℃~55℃/5°F~131°F
36bit
Metal Shell
120mm(L)x60mm(W)x18mm(H)
185g
DC 5V
Full 3D Pass-through
Support IR Control
Ultra HD 4K X 2K
Danger Electric
Shock Risk
Keep Dry
Keep Away
from Heat
4.Stop using the unit during thunder or lightening storms.
5.Avoid the power cable being stepped on or pinched. Position the unit
carefully to avoid damage or accident.
6.Clean the unit only with dry cloth.
7.Only use accessories specified by the manufacturer.
8.Unplug the equipment when unused for a long period of time.
9.Do not try to open any non-serviceable parts. Contact your authorized
servicing center and personnel.
WARNING! This product contains small items that could be a choking
hazard if swallowed. Keep these items away from young children!
AV Supply Group (AVS) intend to make this manual accurate and complete.
However, AVS makes no claim that the information contained herein covers
all details, conditions, or variations. Nor does it provide for every possible
contingency in connection with the installation or use of this product. The
information contained in this document is subject to change without notice
or obligation of any kind. AVS makes no representation of warranty, expressed
or implied, regarding the information contained herein. AVS assumes no
responsibility for accuracy, completeness or sufficiency of the information
contained in this document.
Please read the following safety precautions carefully before you unpack
and install this equipment.
CAUTION: Do not use this product for any purpose not explicitly specified
by AVS. Improper installation may cause property damage or personal injury.
If you do not understand these directions, or have doubts about the safety of
the installation, contact AVS Customer Service or call a qualified contractor.
AVS is not responsible for damage or injury caused by incorrect mounting,
assembly, or use.
1.Do not expose the unit to rain, moisture or any other dripping liquids. And
keep it away from any wet locations such as fishing tanks, vases.
2.Do not install the unit close to fire or any other heat sources.
3.Keep the unit in dry and ventilated area. Do not install in bookcase,
cabinet or any other confined space.
SAFETY PRECAUTIONS

PANEL DESCRIPTIONINTRODUCTION
•1 x HDMI Splitter unit
•1 x 3ft USB A to micro B cable
•1 x USB power adapter
•1 x User Manual
•HDMI, HDCP 1.2 and DVI compliant
•Support full 3D pass-through
•Support 4k x 2k high resolution
•Super IR control system, IR transport channel can be forward or backward
per your installation
•Support CEC bypass
•External and internal EDID settings
FEATURES
PACKAGE CONTENTS
INSTALLATION
CONNECTION DIAGRAM
Front PanelThis super slim 1x2 HDMI splitter is compact and efficient. It allows you to
distribute one HD source to two displays simultaneously without any signal
loss. The system is compatible with HDMI 1.4V, 3D and 4K ultra HD.
Furthermore, the bi-directional IR control function enables to control your
devices more conveniently.
This splitter is ideal for home theater, school, hotels and any other
installations where needs to take an ultra HD source to up to 2 Ultra HD
displays.
•Connect HDMI input port to the signal source equipment such as DVD
player, Blue-ray player, Set-top box etc.
•Connect each HDMI output ports to the HDMI displays.
•Connect IR port with the IR blaster cable (not included in the package）
for IR signal transmission. Place the IR blaster in direct line-of-sight of the
equipment to be controlled.
•Connect the IR receiver cable (not included in the package) for IR signal
reception. An adaptor is needed for connection. Make sure that the remote
being used is in direct line-of-sight of the IR receiver.
•Hook up the USB port on the unit with the supplied USB cable to the USB
power adapter, and plug the power adapter to AC outlet for power supply.
Rear Panel
1 22 3 4
1 IR OUTPUT
2 HDMI OUTPUT LED
3 POWER LED
4 RESET BUTTON
1 HDMI OUTPUT
2 HDMI INPUT
3 POWER SUPPLY INPUT
11 3
2
RESETPower
21
IR Channel
OUTPUT 1 OUTPUT 2 INPUT 5V/1A
DC 5V
08：08 PLAY
RESETPower
21
IRChannel
OUTPUT1 OUTPUT2 INPUT 5V/1A