AVYCON AVA HDMI-SPT-1IN4OUT-HDR2 User manual

HDMI-SPT-1IN4OUT-HDR2
AVA
MANUAL
HDMI SPLITTER

Please read below safety instructions carefully before installation and operation:
Please pay attention to all the warnings and hints on this device.
Do not expose this unit to rain, moisture and liquid.
Do not put any stu into the device.
Do not repair the device or open the enclosure without professional person
guidance to avoid electronic shock.
Make sure good ventilation openings to avoid product overheating damage.
Shut o power and make sure environment is safe before installation.
Use DC5V only. Make sure the specification matched if using 3rd party DC adapters.
DISCLAIMER
The product name and brand name may be registered trademark of related manufac-
tures.™ and® may be omitted on the user manual. The pictures in this user manual are just for
reference. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. We reserve the
rights to make changes without further notice to a product or system described herein to
improve reliability, function or design.
IMPORTANT SAFETY INSTRUCTIONS
1.)
2.)
3.)
4.)
5.)
6.)
7. )

Product Introduction
1
Introduction
1x4 HDMI splitter distributes 1 HDMI source to 4 HDMI displays simultaneously. Apply for STB,
Blu-ray Player, Media Player, Laptop, D-VHS and other HD-Player devices. It's compatible with
HDMI 3D and 4K x 2K.
Product Key Functions
Features
Distribute 1 HDMI source to 4 HDMI displays
Support ultra HD resolution 4K x 2K@60Hz
Support HDMI 3D
Support YUV 4:4:4
Support HDR
HDCP 2.2 compliant
Low power consumption
Support configures the video resolution automatically according to the capabilities of
each connected monitor, allows simultaneous mixed 4K and 1080p display outputs
Plug and play

2
Package Contents
Product Introduction
Panel Description
HDMI Splitterx1 DC5V/1A power
Adapterx1
User Manual x 1
1.)
2.)
3.)
HDMI Output
Ports
EDID Dial Switch Output LED Output LED
Power Indicator
HDMI Input
Ports
HDMI Output
Ports
Power Input
(DCV/1A)
Installation Requirement
Source: HDMI video source, such as Blu-ray player, Game Console, STB,
PC, Etc.
Display: HDTV, projector or other display with HDMI port
HDMI cable: HDMI 2.0 standard cable (can support4Kx2K@60Hz}
DC 5VHDMI 4HDMI 3
HDMI INPUT
HDMI 2HDMI 1
EDID SWITCH

3
Product Introduction
Installation and Connection
Conection Instruction
1.) Connect the HDMI video source output port to the splitter input port by HDMI cable
2.) Connect the splitter output port to HDMI display by HDMI cable
3.) Set the TV input to right HDMI channel
4.) Power on the splitter(Power indicator will light on
Operation
1 .) Before output HDMI signal, the splitter will read EDID information of connected TVs
and send it back to HDMI source part to let it determine the output mode
2.) Indicator led shows the working status
3.) The splitter is build-in 16 kinds of EDID that can be selected by 4
switch codes, corresponding as following.
DC 5VHDMI 4HDMI 3HDMI INPUTHDMI 2HDMI 1
HDMI Splitter
Blu-Ray
Display
1
2
3
4

4
Product Introduction
Note:
Copy Once: Read the EDID of the first connected output only
MIX1: lowest format of audio, and lowest format of video
MIX2: Highest format of audio, and compose down scaling of video
MIX3: lowest format of audio, and compose down scaling of video
Compose down scaling: Only HDMI 4K@60Hz(YCbCr4:4:4 or YCbCr4:2:0) signal, would be
downscale to 1080P@60Hz.
Switch up for “1” Switch down for “0”
1 2 3 4 EDID information
0 0 0 0 4k@60Hz 2CH
1 0 0 0
0
4k@60Hz 7.1CH
1 0 0 4k@30Hz 2CH
1 1 0 0
0
4k@30Hz 7.1CH
0 1 0 1080p@60Hz 2CH
1 0 1 0
0
1080p@60Hz 7.1 CH
1
Switch 1 0 1080i@60Hz 2CH
Status 1 1 1 0
0
1080i@60Hz 7.1CH
0 0 1 1080p@50Hz 2CH
1 0 0 1
0
1080P@50Hz 7.1CH
1 0 1 4K@30Hz HDR
1 1 0 1 4K@60Hz HDR
0 0 1 1 Copy once
1 0 1 1 MIX1
0 1 1 1 MIX2
1 1 1 1 MIX3

5
FAQ
Q: No image output?
A:
1 .) Check the power supply of splitter, make sure the power light is on.
2.) Check if the HDMI cables connected well.
3.) Check and make sure the TV has been set up to the right channel.
4.) While connect with PC or notebook via HDMI, please make sure the output mode is
mirror or extend.
Q: Display is unstable, splash screen, snowflakes or audio stuck?
A:
1. ) Check and make sure all connections are good and correct.
2.) Try to directly connect HDMI source to display, if it is the same, please change the
source device.
3.) Use high-quality HDMI 2.0 cable for transmitting 4Kx2K@60Hz signal.
Q: Display can not output 4Kx2K UHD image when all connections are correct?
A:
1 .) Check and make sure the input sources are 4Kx2K@60Hz UHD signal.
2.) Check and make sure the TV is support 4Kx2K@60Hz resolution.
3.) Check if the HDMI cables are compliant HDMl2.0 standard.
Q: Display can not output HDR eect image when all connections are correct?
A:
1. ) Check and make sure the input sources are support HDR eect.
2.) Check and make sure the TV is support HDR eect image.

Specifications
6
Items
Input ports
Output ports
Power indicator led
Signal indicator led
HDMI Version
HDCP Version
Transmission rate
Frequency Range
Video form
Support audio format
HDMI Resolution
HDR
EDID management
Working temperature
Power supply
Power consumption
Dimension
Weight
Color
Specifications
1 x HDMI
4 x HDMI
1 x LED
4xLED
Compatible with HDMI 2.0, HDMI 1.4
Compatible with HDCP 1.4, HDCP2.2
18Gbps
25MHz~594MHz
Support 3D video and
4K x 2K@30/60Hz ultra HD video
Support standard audio and DSD (Direct
Stream Digital) and HD (HBR) audio
480i/480p/576i/576p/720p/1080i/1080p/
4k x 2k@24/25/30/60Hz
Support
Support smart EDID management, available to
display dierent resolution monitors at the same time
0 C~60 C
DCSV/1A
<3W
158mm(L)x80mm(W)x17mm(H)
200g
Black

1
phone: [phone]
email: [email protected]
social: @avycon_aivo
website: avycon.com
Copyright © AVYCON. All rights reserved. Specifications and pricing are subject to change without notice.