Axesstel MV400 series User manual

MV400 series Quick Reference Guide
Thank you for purchasing your MV400 series EV-DO Wi-Fi Gateway
from Axesstel. This guide will help you understand your MV400 and all the things
you can do with it. For more details please refer to the user manual.
Default package contents
a) MV400 Gateway b) User Manual & Quick guide
c) Software CD d) RJ45 cable & USB cable
e) Power supply & Battery f) Main Unit side-cover
Here’s what you need to get started:
Installation and Setup time: Approximately 5 minutes
RUIMTM Card(Optional)
It is required for the modem to operate on your service
provider’s network. Please contact your service provider.
MV400 series EV-DO Wi-Fi Gateway
Send and receive data between your laptop and the service
provider’s network
Laptop
The laptop you want to wirelessly enable. Windows 98 or later is
required.

Prepare MV400 Gateway
a) If your RUIM is attached to a card, carefully snap out
and remove it from the larger plastic card. Insert RUIM
to your MV400 Gateway(If needed).
b) Mount the battery to MV400 Gateway. If you want to operate with AC power
or to recharge the battery, connect the AC adapter.
Connect your PC to MV400 Gateway
Turn on the power switch from I to O which is on the right side of the unit. Make
sure the Power LED is Solid Green. Wait for a few seconds while MV400
Gateway searches for service network. Once it finds a suitable network, the
Signal LED on MV400 Gateway will light up.
[Using WIFI]
Turn ON your PC. Open the wireless connection interface of your PC and locate
MV400 Gateway in the available wireless network list. Select this SSID to connect.
After a few minutes, Wi-Fi LED of MV400 Gateway and Connect LED will light up.
[Using RJ45 cable]
a) Connect the RJ45 cable to LAN Port (find mark).
b) Open the ‘Local Area Connection’ to setup the configuration.
c) Select the ‘Internet protocol (TCP/IP)’ and press ‘Properties’.
d) Check “Obtain an IP address automatically” & Check “Obtain
DNS Server address automatically” and click ‘ok’ to apply.

[Web Manager User Interface]
Use this utility to set up the MV400 Gateway or manage advanced functions of
MV400 Gateway such as security setting, firewall setting, DNS, DHCP, etc.
a) Fill in http://192.168.0.1 on your Web browser. Enter the User Name and
Password.
User Name: ‘admin’
Password: ‘admin’
b) The “Basic Settings” page appears. This page
shows a quick view of the MV400 Gateway’s
login setting. All other advanced setup pages
can be reached from this page.
c) Now you can browse the Internet or access your email wirelessly
Note) In case of using MV400 Gateway with USB cable, please refer the User
Manual which included in a package box.