AXI.COM Rebounder90 User manual

User manual
Handleiding bewaren voor later gebruik
Keep instructions for later use
Anleitung zum späteren Gebrauch aufbewahren
Conserver la notice pour usage ultérieur
Guardar estas Instrucciones para su uso future
Conservare l’istruzioni per uso successivo
AXI.COM
Wooden playhouse
www.axi.com
WWW.AXI.COM [email protected]
patented product
date: 06-2014
3-7
WARNING
CHOKING HAZARD
small parts
Not suitable for children under
36 months
WARNING
THE PRODUCT IS TO BE
ASSEMBLED BY AN ADULT.
WARNING
Potential hazard description, e.g. In
unassembled state contain potentially
hazardous sharp points, so please
keep out of baby's reach
Handleiding bewaren voor later gebruik
Keep instructions for later use
Anleitung zum späteren Gebrauch aufbewahren
Conserver la notice pour usage ultérieur
Guardar estas Instrucciones para su uso future
Conservare l’istruzioni per uso successivo
Kg
(10 mm)
NOA
Gebruikshandleiding
User manual
Gebrauchsanweisung
Mode d’emploi
Manual de usuario
Instruzione per l’uso
Rebounder90 / Rebounder100 / Rebounder120
A030.411.00 / A030.406.00 / A030.412.00
date: 09-2017
www.axi.com @axi.com

Rebounder90 / Rebounder100 / Rebounder120
A030.411.00 / A030.406.00 / A030.412.00
1 PC
1
CONTENT
1. Take the rebounder out of the package.
2. Place the rebounder on a level surface (fig.1).
3. Lift the front frame with net upwards (fig.2).
4. Slide the pipe that is connected to the top of the front frame into
the pipe that is connected to the base of the frame (fig.3).
5. Pull up the pin and slide the pipe to the desired angle (fig.4).
6. Place the pin back into one of the holes of the stainless steel pipe
to secure the rebounder (fig.5).
7. Your rebounder is now ready to use (fig.6).
ASSEMBLY
CHANGING ANGLE
1. Pull up the pin from at the back of the rebounder (fi g.7).
2. Slide the stainless steel pipe up / down to reach your desired
angle while holding the pin in pulled-out position (fi g.8).
3. When the desired angle is reached, place the pin back into one of
the holes of the stainless steel pipe to secure the rebounder (fig.9).
4. The angle of your rebounder has now been changed.
STORAGE & TRANSPORT
1. Store the rebounder after each use.
2. Pull the pin on the black pipe (fi g.10) and slide the stainless steel
pipe out of the black pipe (fi g. 11) and fold both pipes to the net.
3. Lower the front frame with the net towards the ground (fig.12).
4. You can now move and/or store your rebounder. Use the bottom
frame as a handle (fig.13).
1 2
3 4
11
13
12
56
7 8
9
10
date: 09-2017
www.axi.com [email protected]

Rebounder90 / Rebounder100 / Rebounder120
A030.411.00 / A030.406.00 / A030.412.00
1. This rebounder is made from Steel. Do NOT leave the rebounder outside after use because
moisture will lower the life of the rebounder. Avoid bringing the rebounder in contact with
water, moisture or dampness of any kind.
2. Store in a cool and dry place.
3. Do NOT leave the rebounder unnecessarily exposed to UV rays and direct sunlight.
4. Children under 10 years of age must only assemble under the supervision of an adult.
5. Please keep small children away from the net to reduce risk of entanglement. Do not let
children climb on the rebounder. Exercise caution while using the rebounder when small
children are around! The manufacturer or the seller are not liable for any complications
arising from the misuse of this product.
WARNING
1. Do NOT wash the rebounder. Only wipe clean with a dry cloth.
2. Avoid contact with any corrosive liquids or substances such as water, salt water, fuel, kerosene,
etc. at all times. Oils and such chemicals can damage the net and reduce their life signifi cantly.
CLEANING
1. The rebounder is best moved in the folded position as delivered. Should you want to move the
rebounder in assembled/upright position, please move with two people to spread weight and
reduce risk of injury.
2. Store in a cool and dry place, away from sunlight and dampness. Damp environment may lead
to development of mould on the net.
TRANSPORT AND STORAGE
date: 09-2017
www.axi.com [email protected]