Axon POS System POS 700 series User manual

UserManual
January 2008Revision 1.0
Point - of - Sale
Monitor

2
Copyright2008 Jan.
AllRightsReserved
ManualVersion 1.0
The information containedinthis documentissubject tochangewithout notice.
Wemakenowarrantyof anykindwithregardtothismaterial,including,but notlimited
to,theimplied warrantiesof merchantability and fitness for aparticular purpose. We
shall not beliableforerrorscontained hereinor for incidentalorconsequentialdamages
inconnection withthefurnishing, performance,oruseofthismaterial.
Thisdocumentcontains proprietary information that isprotectedbycopyright.All rights
arereserved.No partofthisdocumentmay bephotocopied,reproducedortranslated
toanotherlanguage without theprior written consentofthemanufacturer.
TRADEMARK
Intel , Pentium andMMXare registeredtrademarksof Intel Corporation.Microsoft
and Windows are registeredtrademarksof MicrosoftCorporation. ELOTouch is the
registered trademarkofELOTouchSystems.

3
Safety
IMPORTANT SAFETY INSTRUCTIONS
1. Todisconnect themachine from the electrial power supply,turn off thepower switch
andremovethe power cordplug fromthe wallsocket.Thewallsocketmust be
easily accessibleandincloseproximitytothe machine.
2. Readtheseinstructionscarefully.Savetheseinstructions forfuturereference.
3. Follow allwarnings and instructions marked onthe product.
4. Do notusethis productnearwater.
5. Do notplacethisproduct onanunstablecart,stand,or table.The product mayfall,
causingserious damagetotheproduct.
6. Slots and openingsin the cabinetand thebackor bottomare provided for
ventilation;toensurereliableoperation ofthe product andtoprotectitfrom
overheating.Theseopeningsmustnotbeblocked or covered.Theopenings should
never beblocked byplacing theproduct onabed,sofa,rug,orother similar
surface.Thisproduct shouldnever beplacednearor overaradiatororheat
register,orinabuilt-ininstallationunless properventilationisprovided.
7. Thisproductshouldbe operatedfromthe type ofpowerindicatedonthemarking
label.Ifyouarenotsure ofthe type ofpower available,consultyour dealerorlocal
power company.
8. Do notallowanything torestonthe powercord.Do notlocatethisproductwhere
persons will walkon the cord.
9. Never pushobjects ofanykind intothisproduct throughcabinetslots astheymay
touchdangerousvoltagepointsorshortoutparts thatcouldresultinafire or electric
shock. Neverspillliquidofanykind onthe product.
CEMARK
Thisdevicecomplies withthe requirements ofthe EECdirective
89/336/EECwithregard to “Electromagneticcompatibility”and73/23/EEC
“Low VoltageDirective”.
FCC
Thisdevicecomplies withpart15oftheFCC rules.Operation issubjecttothe following
two conditions:
(1) Thisdevicemay notcauseharmfulinterference.
(2) Thisdevicemustaccept any interferencereceived,includinginterferencethat may
causeundesiredoperation.

4
LEGISLATIONANDWEEESYMBOL
2002/96/EC Waste ElectricalandElectronicEquipmentDirective onthetreatment,
collection,recyclingand disposal ofelectricand electronicdevicesand their
components.
The crosseddustbinsymbolonthedevicemeansthatitshouldnot be disposed ofwith
otherhouseholdwastes attheend ofitsworkinglife.Instead,the deviceshould be
taken tothe wastecollectioncenters for activationofthe treatment,collection,recycling
and disposalprocedure.
Toprevent possibleharmtotheenvironment or human healthfromuncontrolled waste
disposal, pleaseseparatethisfrom othertypesofwastesandrecycleitresponsiblyto
promotethe sustainablereuseof materialresources.
Householdusersshouldcontact either the retailer where theypurchasedthis product,
ortheirlocalgovernmentoffice, for detailsofwhere andhowtheycan takethis itemfor
environmentallysaferecycling.
Business usersshouldcontacttheirsupplierandchecktheterms and conditions ofthe
purchasecontract.
Thisproduct shouldnotbemixedwithother commercialwastesfor disposal.

5
Revision History
Revision
Number Description RevisionDate
1.0 Initialrelease 2008 January

6
TableofContents
1. ItemChecklist...............................................................................................7
1.1. StandardItems........................................................................................7
1.2. OptionalItems.........................................................................................8
2. SystemView.................................................................................................9
2.1. Front View...............................................................................................9
2.2. RearView ...............................................................................................9
2.3. I/OView ................................................................................................10
3. DriversInstallation.....................................................................................11
3.1. DriverList..............................................................................................11
3.2. ELOTouchDriver Installation................................................................11
3.3. POSTouchDriver Installation................................................................13
4. SystemInstallation ....................................................................................16
4.1. VESA Installation ..................................................................................16
4.2. Stand HolderInstallation.......................................................................17
4.3. VFDInstallation.....................................................................................18
4.4. MSRInstallation....................................................................................20
4.5. PowerCord Installation.........................................................................22
5. SystemDisassembly .................................................................................23
5.1. Removing theStandand theStand holder............................................23
5.2. OpeningtheI/OCover..........................................................................24
5.3. OpeningtheRearCover.......................................................................24
5.4. Replacing theScalar Board..................................................................25
5.5. Replacing theInverter Board................................................................26
5.6. Replacing theOSDBoard.....................................................................27
6. Specification...............................................................................................28
7. Connectorsand JumperSettings.............................................................29
7.1. B13Scalar board..................................................................................29
7.2. Jumper Settings....................................................................................30
7.3. Connectors ...........................................................................................31
7.4. ConnectorsPin Definition .....................................................................32

7
1. Item Checklist
Takethe system unitout of the carton.Remove the unitfrom thecarton by holding it by
the foaminserts.Thefollowing contents shouldbefound inthe carton:
1.1. StandardItems
a. DriverCD
b. PowerAdapter
c. Power Cable(220V or 110V)
d. System

8
1.2. OptionalItems
a.MSR
b.VFD

9
2. System View
2.1. Front View
2.2. RearView
TouchScreen
I/O
VESAMount
CableCover
HolePlug

10
2.3. I/O View
DC- In
VGAin
PS/2in
USB in
C
OM out
COMin
PS/2out
USB out
Power
Left
Select
Menu
Right

11
3. DriversInstallation
3.1. DriverList Folder/File FileDescription
<CD>:\POS720.htm B13 Driver List
<CD>:\COMMON\Elo_Touch ELOTouchDriver
<CD>:\COMMON\POS_Touch POSTouchDriver
-Thefollowing procedures arefor Windows 2000/XP,other platforms are similar.
3.2. ELO TouchDriverInstallation
a. Click ”sw500930”ontheMy computer
window. b. Click the “OK”button onthe Welcome window.
c. Click the ”Unzip”button on the WinZip
Self-Extractor window. d. Select “Install SerialTouchscreen Drivers”and then clickthe “Next”
button
on theWelcomewindow.

12
e. Clickthe “Yes”button onthe License
Agreementwindow. f. Click the “Next”button on theon the “Selectthe COMports…” window.
g. Select “COM5”andclick the “Next”
button onthe ChoosetheCOM ports…
window.
h. Click the “Next”button on theYouhave
selectedtheCOM ports…window.
i. Clickthe “Finish”button ontheSetup
Completewindow j. Click the “Yes”button and restartyour system.

13
k. After the computer has restarted,click
“Align”onthe EloTouchscreen
Properties window.
l. Follow theinstructionsonthescreen to
calibratethetouchpanel.
3.3. POSTouchDriverInstallation
a. Double click the ”Setup”onthe “My
Computer”window. b. Clickthe “Next“buttonon the “Welcome window”.
c. Click the ”Yes”button on the “License
Agreement”window. d. Click the ”Next”buttonon the “Choose Destination Location”window.

14
e. Click the “Next”buttononthe “Select
Program Folder”window. f. Clickthe “Finish”button onthe “Install Shield Wizard Complete”window.
g. Click the “Continue Anyway “buttonon
the “Hardware Installation”window. h. Selectthe “Yes”and click the”OK”
button
andrestartyour system.
i. After thecomputer has restarted, select
“Programs àTouchUtility àScanRS232
TouchDevice”.
j. The serialports arescanned for a touch
device.

15
k. Select “Programs àTouchUtility à
Touch
Utility”. l. Click “Scale/Offset”on thePOSTouch Utilitywindow.
m.Follow theinstructionsonthescreen to
do athree point calibration ofthe touch
panel.
n. Select “Device à9PtsCalibration”
on the
POSTouchUtilitywindow.
o. Follow theinstructionsonthescreen to
do anine point calibrationof thetouch
panel.

16
4. System Installation
4.1. VESAInstallation
a. Placethepanelbracketon theon theback ofthe system, and align the
bracketholes withthe VESAholesofthe system.
Tightenthe screws(4)"
b. Placethewall mountkit on the
panelbracket and tighten thescrew
(1)
c. Attachthe paneltothewall mount
bracketandtighten the thumbscrew
tofinishthe WallMount Installation

17
4.2. Stand Holder Installation
a. Slidethe standbracket intothe position
b. Tighten thescrews (6), 3oneachside
c. Attachthe stand holder totheVESAholdsand tightenthe screws(4)

18
d. Attachthe paneltothestand bracket
e. Tightenthe thumbscrew (1)
4.3. VFD Installation
a. PlacetheVFDholderonthe VFDbracketandtightenthe thumbscrews (2)

19
b. AttachtheVFDholder on therearcover andtighten thescrews(2).Put the
VFDcablethroughtheVESAbracket
c.Thecableshouldcomeoutfrom thebottomside ofthe VESAbracket and
bandover inorder toconnecttotheI/Oport
d. Connect totheCOMportasshownbythepicturetofinishthe installation

20
4.4. MSR Installation
a. Loosen the screws (2)
b. slide the MSRintotheposition
c. Tighten thescrews (2)