Axxera ARC600 User manual
ARC600 -
Quick
Start
Guide
This Quick
Start
Guide provides basic instructions
for
using your Axxera Rear Camera.
To
download
the
complete Owner's Manual please
visit www.axxeraaudio.com/
support/
manuals.pdf
and type
in
the
product's model
number
or
call
customer
service
at
1-866-382-5476.
Product Wiring Diagram
CAUTION
When installing the rear camera,
the hole size should necessarily
beat10mm.
CAMERA CABLE EXTENSION
CABLE
.__
____
,-==
Please use the enclosed tape
to tighten them. not to be loose.
Please use when connecting to a Navigation
or
monitor which does not have an automatic
rear
view
switching function
RED
(Reverse
Signal
+12V)
FUSE
BOX
Bl..PCK(GND)
POWER
CABLE
Productfeature
. 1/3.7 inch image sensor
Using 1/3.7 inch image sensor displays vivid image day and night.
• Waterproof design
It
blocks the inflow
of
moisture and external materials
from
complete waterproof design.
• Zinc die casting case
Iron die casting case with great durability is applied for quality and design of the product.
• Simple design
It
was designed with unique design of vehicle in elegant design and simple installation.
· View angle
of
163°
It
secures broad sight when
it
is
converted into rear view screen by providing lens angle
of
163°.
· Parking guide line
R:>ssible
to
safe
parking along parking guide
line.
Main
components
Main components
Camera extension cable power cable
1 8
nut
hole guide sticker
double
-side
tape
fixed
tape
Guidelings before installation
manual
• The power of this product is designed with the specification of
DC
12V
vehicle.
• Do not disassembe the product as
it
is
water-proof.
•
Do
not wipe or scratch the camera lens with sharp object as
it
may cause the
lurriness of the image. (Repair is unavailable)
• Do not voluntarily cut off the wire or connect with other wires.
It
may cause severe
damage to electric devices of vehicle. (Repair is unavailable)
• Camera should be installed accurately.
Installation of this camera may cause collision with pedestrians or minor collisions
with other vehicle so
it
should not be.
• Camera lens should be wiped regularly with soft cloth and others
in
order to remove
external materials such as sand. snow, and others on the surface of camera.
• The angle of is subject the vibration of vehicle. Install
it
so that
it
not be shaken.
• Please Install
it
so that each connecter contact moisture.
Gettingstatedbefore
use
• For safe and correct use of this product. you must read manual and understand before
the use of product.
• This
is
an advanced driver assistance system which examines the obstacles at rear of
vehicle and informs them to the drivers with the use of wide angle lens during parking
and stops.
• Please keep
in
mind that performance and design of this product may change for the
improvement
in
product's performance.
ProductInstallation
1.
After marking a hole as the mounting position of the camera, please drill the hole
(10mm)
and install the rear camera to the hole.
Tip.
The sealed guide sticker will
be
a useful tool to mark the mounting position.
2.
Fix the camera with the sealed nut.
Tip.
Please do
not
too tighten when adjusting the camera angle.
3.
After connecting the RCA video signal terminal of the extension cable, connect to the
camera cable terminal.
Caution. Please spread out the cable as long as possible
for
installation.
4.
After connecting the power cable to the extension cable. connect red(+) and
black(-)of the power cable to the reversing light.
Caution. Please check the voltage suitab/1/ty
of
the vehicle
and
this product
and
shut down
the
power
of
the vehicle during installation
Please note electric leak during wiring work Installation.
5.
After
all
the wiring work has been completed,
check
the camera operation.
Tip. When reinsta/1/ng the internal structure, Please
pay
attention to the cables.
6.
After adjusting the camera angle to suit the driver's preference. tighten the nut.
Caution. The rear camera Is used as a supplementary
aid
when reversing.
Specification
DESCRIPTION NTSC
Pick-up Device 1/3.7" Color Image Sensor
Number
of
image Pixels 682 (H) X
496
(V)
Output Image
Wide
Viewing Angle and Mirror
Operating Voltage DC12V (
6V~
20V
)
Consumption Current
50mA
(Max),
at
DC 12V
LENS
Wide
Viewing Angle163: F=1.9
Video Output 1.0Vp-p (75 ohm), Composite
Shutter Control Electronic Auto IRIS (1/60,1/50-1/100,000)
Horizontal Resolution
450
TV
Lines
Min. illumination 0.1 Lux
S/N Ratio More Than 42dB
Operating Temperature
-30"C
~
+85"C
Storage Temperature
-4o·c
-+125"C
Material Zinc
Cable Length Camera 1
m,
Extension 7m, Power 1.5m
NOTICE. Specifications suject
to
change without notice.
Trouble shooting
• Please
check
whether or not external materials are on the lens of camera installed
to the vehicle
in
case there is problem with the quality of image.
• Please
check
the product installation method
in
manual
in
case problem occurs during
the installation.
• Please
check
all connection of camera cable. power supply cable and video cable.
if
no image in screen.
• Please
check
FUSE
of power supply,
if
no image
in
screen.
One-YearLimited Warranty
This warranty gives you specific legal rights. You mayalso have other rights which
vary from state to state. Dual ElectronicsCorp.warrants this productto the original
purchaserto befree from defects
in
material and workmanship for a periodof one
yearfrom the date of the original purchase.Dual ElectronicsCorp.agrees.at our
option.during the warranty period,to repair anydefect
in
material or workmanship
or to furnish an equalnew. renewedor comparableproduct(whicheveris deemed
necessary)in exchangewithout charges.subjectto verificationof the defector
malfunction andproof of the date of purchase.Subsequent replacement productsare
warranted for the balanceof the originalwarranty period.
Who
is
covered? Thiswarranty is extendedto the original retail purchaserfor
productspurchased andused
in
the U.S.A.
What
is
covered? Thiswarranty covers all defects
in
material andworkmanship
in
this product.Thefollowingare not covered:installation/removal costs. damage
resulting from accident,misuse. abuse,neglect.product modification. improper
installation, incorrect linevoltage.unauthorized repair or failure to follow instructions
suppliedwith the product.or damage occurringduringreturn shipment of the
product.
What to do?
1.
Before you call for service.checkthe troubleshooting guide
in
yourowner's manual.
A slight adjustment of anycustom controls maysave you a servicecall.
2.
If
you require service during the warranty period.you must carefully packthe
product(preferably
in
the original package)andship
it
by prepaid transportation
with a copyof the original receipt from the retailer to an authorized service center.
3.
Pleasedescribe your problem
in
writing and include your name. a return
UPS
shipping address
(P.
0.
Boxnot acceptable).and a daytime phone numberwith
your shipment.
4.
For more information andfor the locationof the nearest authorized service center
pleasecontact us toll-free
at1-866-382-5476or
byemail at [email protected]
Exclusion
of
Certain
Damages:
Thiswarranty
is
exclusive and
in
lieu of any
andall other warranties. expressedor implied.including without limitation the
implied warranties of merchantabilityandfitness for a particular purposeandany
obligation.liability.right, claim or remedyin contract or tort. whetheror not arising
from the company's negligence. actual or imputed. No personor representativeis
authorized to assumefor the company anyother liability
in
connection with the sale
of this product.
In
noeventshall the company
be
liable for indirect. incidental or
consequential damages.
Duel Electronics Corp.
Toll
Free:
1-866-382-5476
www.e~raaudio.com
©2014
Duel Electronics
CQrp.
All rights reserved.
NSC0103-VD1
Printed In KOREA
