aykah BRITTANY User manual

ASSEMBLY SHEET
BRITTANY
version 1.0

PROTECTIVE PAD
MATTRESS STOPPER
GAS LIFT RIBBON
GAP NUT
PROTECTIVE PAD
34
46
14
6
8
4
8
1
1
1
8
8
14
2
1
Brittany Bed P age 2 of 13
PARTS INVENTORY
A
B
C
D
E
F
G
H
ID DESCRIPTION QTY
PARTS INVENTORY
I
J
K
L
M
N
ID DESCRIPTION QTY
No. of People: 2 NO power tools
required.
Time: 2 hours Use a damp
cloth to clean.
ASSEMBLY INSTRUCTIONS
Please do not use a power tool to assemble this product. Using one may hinder
and/or damage the item and will invalidate any claims for warranty.
Depending on the amount of use this product receives, it may be recommended to
tighten up the fixings from time to time. This is completely normal!
Do not drag the bed. Always lift with at least two people to avoid injury or
damage.
Thank you for making a purchase with Aykah. The goal of this assembly sheet is to
help you assembly the product in a way that will contribute to its longevity and
durability. Kindly follow all the instructions carefully to ensure a safe and accurate
assembling process.
A few important things to note:
M8*40 BOLT
M8*65 BOLT
OM8*25 BOLT
FLAT WASHER M6
SPRING WASHER
FLAT WASHER M8
NUT
M6*10 BOLT
ALLEN KEY
OPEN SPANNER
Level of
difficulty: 3/4

Brittany Bed P age 3 of 13
1
1
1
1
2
1
1
2
30
30
15
PARTS INVENTORY
1
2
3
4
5
6
7
8
9
10
11
ID DESCRIPTION QTY
2
2
1
2
1
1
1
1
1
2
PARTS INVENTORY
12
13
14
15
16
17
18
19
20
21
ID DESCRIPTION QTY
Headboard
Footboard
Left Hydraulic
Right Hydraulic
Gas Lift
Left Side Rail
Right Side Rail
Wood Slat
Single Close Ended Clip
Double Open-Ended Clip
Right and Left Metal Frame
Up and Down Metal Frame
Side Rail Connecter
Center Frame
Center Floating Leg
Corner Bracket
Footboard Middle
Bracket
Left Headboard Wing
Right Headboard Wing
Bottom Nonwoven
Cloth
Headboard Back
Nonwoven Cloth

STEP 1
STEP 2
Brittany Bed P age 4 of 13
21
20
E
H
34
5
5
A
1
Step 1: Attach W1 (20) and W2 (21)
to the headboard using
hardware parts H, A and E.
Step 2: Attach mechanism (5) to gas lift (4)
on both ends on the right and left
gas lift. We will now refer to this as
the "gas lift mechanism".
!

STEP 3
STEP 4
Brittany Bed P age 5 of 13
3
7
4
6
N
E
19
J
O
E
A
Step 3: Attach the gas lif t
mechanism (3and 4)
to the side rails 6
and 7 using
hardware N, E and B.
Step 4: Attach bracket (19) to footboard(2)
using hardware A and E.
!stick the felt on top of the bracket
!
!

STEP 5
Brittany Bed P age 6 of 13
6
7
2
EDA
a
6
7
2
E
O
J
17
b
Step 5b: Attach the corner bracket (17) to side rail (6 and 7) and footboard (2),
using hardware E and A .
Step 5a: Attach the side rail (6 and 7) with the footboard (1), using hardware E,
D and A.
!stick the felt on top of the bracket
!
!

STEP 5
Brittany Bed P age 7 of 13
B
13
6
7
2
1B
B
E
c
Step 5c: Attach the rail to the headboard and metal bar using B and E.
!

STEP 6
Brittany Bed P age 8 of
13
O
O
13
!
Step 6: Attach the center support to both the side rails, using
hardware A.
STEP 7a
: pay attention to the
three holes on both.
They should be on the
same side on both rails
C
G
C
G
12
12
11
11
Step 7a: Attach parts 11 and 12 using hardware C and G.
C
G
!

STEP 7b
STEP 8
Brittany Bed P age 9 of 13
A
A
15
E
E
F
F
KK
E
A
E
A
F
14
F
Step 7b: Attach part 14 to both sides of part 12, using hardware A, E
and F.
Step 8: Attach the support
legs to part 14,
using
hardware
A, E and F.
!
!

STEP 9a
Brittany Bed P age 10 of 13
E
F
F
J
J
M
F
AA
E
A
E
Step 9a: Attach the frame that built in the previous step to the gas lift
mechanism at a 45° angle (meaning it will be slanted as the picture),
using hardware C, F and E.
!Stick the felt on top of the metal
bar.
!

STEP 9b
Brittany Bed P age
11 of 13
DO NOT
PUSH DOWN ON ONE.
OR EITHER SIDE
ONCE THE MATTRESS IS ON TOP,YOU CAN
OPEN & CLOSE THE BED SAFELY
USE ONLY 2 HANDS
IN THE MIDDLE TO
CLOSE
Step 9b:
Once all the nuts and bolts are tightened firmly, the first time
you close the lifting mechanism, push down with extra
pressure to force open the seals on the pistons.
This will feel like a lot of pressure, so be firm and it will close!

!
8
8L
10
9
Step 10: Attach the slats to the plastic clips and insert them into the
holes of the metal bar.
: Clips open from both sides will be attached
to the middle bar,
and clips open from one side will be attached to the side
bars.
STEP10
Brittany Bed P age
12 of 13

STEP11
Brittany Bed P age
13 of 13
18
16
Step 11a
Step 11b
:
:
Attach
Attached
the non-woven fabric to the
the non-woven fabric to the back of the
bottom of the bed
headboard.