BABY DELIGHT SNUGGLE NEST User manual

Please read the following instructions and warnings carefully.
Keep this instruction manual for future reference.
Tools required (for wall mouting Camera only): Screwdriver
and Drill (not included)
For technical support see back page.
Adult use only.
Warnings & Guidelines:
INSTRUCTION MANUAL
STRANGULATION HAZARD - Keep
cord out of baby’s reach. NEVER
place camera or cords within 3 feet of the crib. Use enclosed
Security Clips to help secure cord away from baby’s reach. Never
use extension cords with AC Adapters. Only use the AC
Adapters provided. Do not remove this tag.
WARNING:
Adult assembly required. Keep
small parts away from children
when assembling.
WARNING:
1

Warnings & Guidelines • Continued
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
• STRANGULATION HAZARD - Keep cord out of baby’s reach.
NEVER place camera or cords within 3 feet of the crib. Use enclosed Security
Clips to help secure cord away from baby’s reach. Never use extension cords
with AC adapters. Only use the AC adapters provided.
• When an AC adapter is plugged into an electrical outlet, do not touch the
exposed end.
• Test monitor before first use, periodically, and when changing location of
the Camera.
• Do not use monitor near water (such as bathtub, sink, etc.).
• Keep monitor away from heat sources (such as stoves, radiators, etc.).
• Make sure there is proper ventilation around all monitor components. Do
not place on sofas, cushions, beds, etc. which may block ventilation.
• This product is not a toy. Do not allow children to play with it.
• This product contains small parts. Adult assembly required. Exercise care
when unpacking and assembling the product.
WARNING:
2
• 6 Cable Clips
• 2 Anchors & Wall Mount Screws
• 1 Camera
• 1 AC Adapter
Camera AC Adapter
All Components
Hardware
X2 X2 X6 X1

3
Product Setup
PowerSpeaker
Power LED
Reset Button
WiFi LED
1Please make sure you have a
smart device with iOS (9.0 or
higher) and Android (5.0 or
higher). Download the Baby
Delight App on the App store or
Google Play.
2Add an account if this is your
first camera. Follow the on screen
instructions within the App.
Features • Camera
LensMicrophone
OR
(Go to page 6 if you are adding an additional Camera to an existing system.)

4
Camera Placement • On Flat Surface
1
Determine a location
for the Camera that
will provide the best
view of your baby
in the crib. Place
the Camera on a flat
surface, such as a
dresser, bureau or
shelf. NEVER place
Camera or cords within
3 feet of the crib.
WARNING: 3 FT
at least
3ft
from crib
IMPORTANT
PLUG IN
Never place Camera
cords within 3 feet of
the crib. Place Camera
in a location that has
a strong WiFi signal
strength.
Determine a location for the Camera that will provide the
best view of your baby in the crib. Place the Camera on
a flat surface, such as a dresser, bureau or shelf. NEVER
place Camera or cords within 3 feet of the crib.
Hold Camera base
and turn the post
counter clock wise
to free the plate.
1 2
IMPORTANT
at least
3ft
Camera Placement • If Wall Mounting

5
Place the round plate on wall and mark
the hole centers.
3
Drill the holes with a ¼” drill bit and
insert the wall anchors.
4
Insert the screws in the wall anchors,
leave a gap of about 1/8 of an inch.
Place square plate on top of round
plate and insert Camera base post and
turn it clockwise until is tight.
Place the round plate over screws.
5
7
6
Use the included 6 wire clips to
securely keep the Camera Adapter wire
out of the baby’s reach.
8

6
9
Determine a
location for the
Camera that will
provide the best
view of your baby
in the crib. Place
the Camera on
a flat surface,
such as a dresser,
bureau or shelf.
NEVER place
Camera or cords
within 3 feet of
the crib.
PLUG IN
USE
CLIPS
IMPORTANT
at least
3ft
Camera LEDs
Adding a Camera to an Existing System
Power LED:
Turns ON when Camera is plugged to power.
WiFi LED:
Flashing green when Camera is not connected to WiFi.
Solid green when Camera is connected to a WiFi.
Turns off when Camera night vision is ON.
Power LED
WiFi LED
Open the home screen of the Baby
Delight App.
Press the Plus sign on the home screen
and follow the on screen instructions.
1 2

7
Reset Button
Press the reset button for 10 seconds
on these cases:
• When required on the app
Limited Warranty
At Baby Delight, Inc. we make innovative and high quality products for babies,
children and their parents. We warrant this product to be free from defects in
material and workmanship existing at the time of manufacture for a period of
one year from the date of initial purchase (sales receipt is required for proof of
purchase). If such a defect is discovered during the limited warranty period, we
will, at our sole option, repair or replace your product at no cost to you.
This limited warranty does not cover claims resulting from misuse, failure to
follow the instructions on installation, maintenance and use, abuse, alteration,
involvement in an accident, and normal wear and tear.
For warranty service or replacement part information:
USA: Please call 1-401-333-6800, or write to Consumer Services, 30 Martin St.
Cumberland, RI 02864
Some replacement parts may be available for purchase after this limited warranty
expires. Please visit us at www.babydelight.com or call us at 1-401-333-6800
for details.

8
Macari Baby, Inc. 401-333-6800
30 Martin Street, Cumberland, RI 02864
www.babydelight.com
[e-mail]
MADE IN CHINA
BD04040