Baby Knightly BR1414-2 User manual

_____________________________________
(TAKEN FROM CARTON)
INFORMATION. PLEASE READ AND
7-DRAWER DRESSER
CONTAINS IMPORTANT SAFETY
Lot number:
Date of purchase:
NOTE:
THIS INSTRUCTION BOOKLET
_______ / _______ / _______
INSTRUCTION MANUAL
KEEP FOR FUTURE REFERENCE.
(ANTIQUE WHITE)

*
* Handling will require two people.
*
NOTES:
CARE AND CLEANING
Do not use the unit if it is damaged or broken.
To avoid unnecessary damage, when levelers have been extended, DO NOT drag across
surface when moving. Be sure to lift and carry the item to its location.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
MAINTENANCE
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
Check bolts/screws periodically and tighten them if necessary.
WARRANTY

PARTS LIST
NO. Drawing Q'ty
A 3 PCS
B 4 PCS
C 1 KIT
D 1 PC
Leveler
(Pre-Installed)
Description
The adjustable leveler is located
on the support leg underneath
the 7-drawer dresser.
Safety Strap kit
Large Drawer
Small Drawer
D
7-DRAWER DRESSER
(ANTIQUE WHITE)

CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
MAXIMUM WEIGHT
FOR SMALL DRAWERS
- 10 LBS
MAXIMUM WEIGHT FOR
LARGE DRAWERS - 15
LBS
MAXIMUM
WEIGHT FOR TOP
IS 25 LBS
7-DRAWER DRESSER
(ANTIQUE WHITE)

Furniture Wall Safety Strap
Hardware List
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 5/16" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY
QUESTIONS, PLEASE CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY
REMOVE THE SCREW (A) FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE MAY TIP
OVER. PLEASE INSTALL THE SAFETY WALL STRAP BEHIND THE FURNITURE TO
ENSURE SAFETY.
STEP 1: ATTACH A METAL BRACKET (B) SECURELY TO THE BACK TOP RAIL OF FURNITURE USING THE
SHORT SCREW (C), THROUGH THE SMALLER HOLE.
STEP 3: PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN LINE.
LACE THE END OF THE SAFETY WALL STRAP (D) THROUGH THE LARGER HOLE IN EACH MOUNTING
BRACKET (B). BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END THROUGH THE LOCKING END AND
DRAW IT THROUGH UNTIL ALL SLACK IS REMOVED.
STEP 4: CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
LONG SCREW 1 PC
METAL BRACKET 2 PCS
SHORT SCREW 1 PC
SAFETY WALL STRAP 1 PC
A
B
C
D
B
B
A
C
D
B
STEP 2: LOCATE THE OTHER METAL BRACKET (B) ON THE WALL OVER A WALL STUD AND 2 INCHES BELOW
THE MOUNTING BRACKET SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE WALL STUD USING THE
LONG SCREW (A) PROVIDED, THROUGH THE SMALLER HOLE.

Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service