Babyletto Hudson 3-Drawer Changer Dresser User manual

Item# 4223
Hudson 3-Drawer Changer Dresser Assembly Instructions
1
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CHANGING PAD.
WARNING!
!
revised 13JAN2020

* Tools Needed (not included)
Phillips screwdriver
* You will need two people to
assemble this 3-drawer changer
dresser.
2
Thank you for purchasing this nursery product! To ensure safe use of your product, please follow
these assembly instructions closely. If you are missing parts or have any questions, please visit our
website at www.designkids.com.au.
For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using
a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or
use power screwdrivers. Our pieces are made from natural woods. Due to the nature of wood, some
variation in color, grain, or texture is to be expected.
We hope you and your growing family enjoy our product.
With thanks,
Ubabub International Pty Ltd
Thank you for purchasing this nursery product! To ensure safe use of your product, please follow
these assembly instructions closely. If you are missing parts or have any questions, please visit our
website at www.designerbabybrands.co.nz
For assembly, use the Allen wrench if it is included in the hardware box. We also recommend using
a Phillips head screwdriver (not included) to complete assembly. Please do not substitute parts or
use power screwdrivers. Our pieces are made from natural woods. Due to the nature of wood, some
variation in color, grain, or texture is to be expected.
We hope you and your growing family enjoy our product.
With thanks,
Designer Baby Brands Limited
For New Zealand :
For Australia :

PARTS
Not to Scale
3
D-1. Top Panel EX-1. Bottom Panel
(Face Down)
H. Back panel (2)
P-1. Drawer bottom (3)
M-2. Right drawer side (3)L-2. Left drawer side (3)
K-2. Drawer front (3) N-2. Drawer back (3)
F. Foot (2) G. Base Cross Bar (2)
J-1. Back Top Bar
J-2. Front Cross Bar
C-2. Center Panel
(Face Up)
AX-2. Left Side Panel BX-1. Right Side Panel
H-1 H-2
(Face Left Side) (Face Right Side)
3

TRAY PARTS
AA. Tray Bottom Panel
UX. Tray Back Rail
VX. Tray Left Side Rail
Z. Tray Small Rail
WX. Tray Right Side Rail
X. Tray Cross Support
T. Tray Front Rail
Y. Tray Center Rail
HARDWARE
Bolts in Actual Size
Not to Scale
4
R. Shelf
Q-1. Door
S-1. Finished Drawer Front (3)
H1. 3,2 cm Round
Head Bolt (8)
H3. 1,4 cm Phillips
headscrew (28)
H2. 3,2 cm Wood
Screw (24)
H4. Small Wood
Screw with Washer (2)
H8. Big Wood
Dowel (12)
H6. 1,58 cm Flat Head
Screw (8)
H7. Metal Pin (4)H5. Door Hinge (2)

ASSEMBLY INSTRUCTIONS
1
5
H14. Safety Strap
H15. 1,58 cm Wood
Screw (3)
H12. Bracket (2)
H9. Small Wood Dowel (31) H10. Cam Bolt (22) H11. Cam Lock (22)
H13. 1,58 cm Flat
Head Screw (4)
H16. 0.8 x 2 cm
Wood Dowel (6)
H17. 1,9 cm Phillips
Head Screw (12)
H11H11
H11H11
H10
H9
H11H11 H11H11
H11H11 H11H11 BX-1AX-2 C-2
(Face Left Side)
H10
H9 H10 H9
H11
X12
H10
X4
H9
X4

2
1(Continue)
6
J-1
H11 H11 H11J-2
EX-1
(Face Up)
H9
H9
H9
H10
H10
H9
H9
H9
H10
H10
H9
H9
H9
H10
H10
H11
H10
X6
H9
X9 X4
* Rotate H11 clockwise
to secure.
C-2
J-2
C-2
(Face Left Side)
J-2
H11

7
4
X4 G
G
F
F
3* Rotate H11 clockwise
to secure.
X3
AX-2
BX-1
C-2
J-2
J-1
H8 H8
F
H8
F
H11
H8
H8
H8
(back)

8
6
* Rotate H11 clockwise
to secure.
H10
H11 EX-1
BX-1
EX-1
C-2
AX-2
X6
5
EX-1
(Face Up)
F
G
X8
F
H1
F
EX-1
H11
H9

9
7
8
H5
Q-1
BX-1
BX-1
X2
Q-1 H6
H6
H6
H6
D-1
H9
H9
H9
H10
H10
H9
H9
H9
H10
H10
H9
H9
H10
H10
H10
X6
H9
X8

9
D-1
* Rotate H11 clockwise
to secure.
H10
X6
H11
H11
H9
DRAWER ASSEMBLY INSTRUCTIONS
10
10
M-2
L-2
H2
H2
K-2
10a

11
K-2
H2
H2
N-2
P-1
H17
H17
H16
H16
H17
H17
S-1
P-1
K-2
10b
10c
10d

12
10e
10f
C-2
AX-2
C-2
AX-2
* Make sure that the drawer is
placed on the tabs on the glide
rails.
C-2

13
* Press the plugs (H7) to
the suitable position and
place the shelf (R) into the
dresser.
11
R
H7X4
10g
* Screw the 9/16” wood screw (H3) in the
pre-drilled holes on the drawer side panels.
DO NOT OVERTIGHTEN THE SCREWS.
X2
H3 H3
* Make sure that the glide touch
the drawer front panel.
S-1
S-1
S-1
C-2
AX-2

14
TRAY ASSEMBLY INSTRUCTIONS
13a
12
H-1H-2
H15
H15
H15
H3 H3 H3
H3
H3
H3
H3 H3H3
H3 H3
H3
H3
H3
H3 H3
Dresser Back
X3
H-2 H-1
H15
X16
H3
H-1
H9X2
X2
H9
X6
H9
H9
H9 H9
H9
H9
VX Y
Z
H9
H9
WX

15
13c
Slide
AA
UX
VX
Y
WX
X
UX
X
13b
H10
H11
X3
H11
H10
H11
H10
H11
UX
WX
V
H10
H11
Y
VX
* Rotate H11 clockwise
to secure.

16
13e
13d
H11
H11
H11
T
WX
X3
H11
H9
H10
H10
H10
H10
Y
VX
X
X
T
H4
X2
H14
H4
H14
* Make sure that the
end of cross support
(X) fits the notch
centered in the front
rail (T).
* Rotate H11 clockwise
to secure.
H11

14
H13
H12
X2
Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the
steps below to install this anti-tipping strap.
FURNITURE ANTI-TIPPING KIT INSTALLATION
15
17
Phillips
screwdriver Pencil
Stubby
Screwdriver
Tools Needed (not included)
WARNING
Children have died from
furniture tipover. To reduce the
risk of furniture tipover:
This is a permanent label.
Do not remove!
ALWAYS install tipover restraint
provided.
NEVER put a TV on this product.
NEVER allow children to stand,
climb, or hang on drawers,
doors, or shelves.
NEVER open more than one
drawer at a time.
Place heaviest items in the
lowest drawers.
X3
X 1 X 1
X 1
HARDWARE
X 1
X 1
CHANGER PAD IS NOT INCLUDED,
SOLD SEPARATELY.
THIS PRODUCT IS DESIGNED TO BE
USED WITH A
80 CM X 40 CM CHANGING PAD.

2” x 4” wall stud
Locate a 2” x 4” stud behind the wall,
and make a mark.
15a
15b
Install the strap on the wall with long
screw and washer.
15c
Install the other end of strap on the
back of dresser with short screw and
washer into the wood framing of the
dresser.
READ ALL INSTRUCTIONS BEFORE
USING THE PRODUCT. KEEP THE
INSTRUCTIONS FOR FUTURE USE.
KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
The recommended maximum weight of the
occupant is 13.6 kgs on changing table.
Finish
18

WARNING!
FALL HAZARD
TO PREVENT DEATH OR SERIOUS
INJURY, ALWAYS KEEP CHILD WITHIN
ARM’S REACH.
READ ALL INSTRUCTIONS BEFORE
ASSEMBLING THIS PRODUCT. KEEP THE
MANUAL FOR FUTURE USE.
To prevent death or serious injury, always
keep child within arm’s reach. Never leave child
unattended and always use restraining system.
WARNING!
FALL HAZARD
WARNING:
• Always secure this tray, using the provided hardware, to the changing surface. See instructions.
• The tray is to be used on a surface that is level, stable and structurally sound with a minimum
surface dimension of 85 cm by 45cm.
• Read all instructions before use of the changing table.
• Do not use changing table if it is damaged or broken.
• This product is not intended to be used as a changing table without adult supervision. Use of the product
without this may result in death or serious injury to your child from falling. Follow all instructions on attaching
and using the changing table.
• The maximum weight of the child for which the changing table is intended is 13.6 kgs.
• Stop using this changing table when the child is able to sit up or roll over.
• As with all infant and baby furniture, it is important to check fasteners, screws, and bolts periodically for
tightness. Parents should ensure a safe environment for their child by checking the furniture regularly before
placing the child in the product.
• When using this product, always secure the child with the safety strip.
19
FALL HAZARD: Children have suffered serious injuries after falling from
changing tables. Falls can happen quickly.
STAY in arm’s reach of your child.
ALWAYS secure this unit to the support surface by the provided hardware.
See instructions.
This tray is intended to be used only with MDB Family products. All other
uses are at the risk of the user.
The tray is to be used on a surface that is level, stable and structurally sound
with a minimum surface dimension of 85 cm by 45 cm.
WARNING:

20
Contact us:
Ubabub International Pty Ltd
PO Box 4129, Ringwood VIC 3134
[phone]
[email protected]
www.designkids.com.au
AUSTRALIA - WARRANTY
Ubabub International Pty Ltd warrants that yourHudson 3-Drawer Changer Dresser will be free
from defects the whole product for a period of one year, from the date of purchase. This warranty
only applies where the product is completely and correctly assembled and used in accordance
with all accompanying recommendations and users instructions. This warranty is in addition to
your rights under the Australia Consumer Law.
Ubabub International Pty Ltd will provide you with a replacement for this product if the Hudson
3-Drawer Changer Dresser becomes defective within the warranty period. Ubabub International
Pty Ltd will bear the reasonable expense of claiming the warranty. This warranty will no longer
apply where the defect is a result from installation and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the finish, design, and hardware of the changing table.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.
Please retain your receipt as proof of purchase and contact Ubabub International Pty Ltd for
further assistance on how to process any warranty claims.
Business name: Ubabub International Pty Ltd
Business address: PO Box 4129, Ringwood VIC 3134
Phone number: [phone]
Email address: [email protected]
Manufacturer name: Hsing’s Industrial Corp
Manufacturer address: No.186, Chih Kan N.Rd. Tzu Kuan Hsiang, Kaohsiung Hsien,
Taiwan 826, ROC.
IMPORTANT:
As with all infant and baby furniture, it is important to check fasteners, screws, and bolts
periodically for tightness. Parents should ensure a safe environment for their children by
checking the furniture regularly before placing a child in the product.