BaByliss ITALIA BRAVA BABFB1BA User guide

ITALIA BRAVA PROFESSIONAL LUXURY DRYER
Instruction/
Styling Guide
Model: BABFB1BA
BABFB1A
16_BABFB1BA_IB.indd 1 08/03/2016 8:51 AM

2
WARNING
• When using electrical appliances,
especially when children are
present, basic safety instructions
should always be followed.
• Polythene bags over product or
package may be dangerous. To
avoid danger of suocation, keep
this wrapper away from babies
and children. This bag is not a toy.
DANGER
• Do not use this appliance in or
near bathtubs, showers, basins or
other vessels containing water.
• Do not immerse the appliance in
water or other liquids.
• When the hairdryer is used in a
bathroom, unplug after use since
the proximity of water presents a
hazard even when the hairdryer is
switched o.
• Do not reach for an appliance
that has fallen into water. Unplug
immediately.
• This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
• Children should be supervised to
ensure they do not play with the
appliance.
IMPORTANT!
• Always unplug the appliance when
not in use or before cleaning. Do
not leave unattended when
plugged in or switched on. Do not
place on any heat sensitive surface
and always allow to cool before
storing away.
• Use this appliance only for its
intended use and as described in
this instruction booklet.
• Do not use any other attachments
other than those supplied with this
product.
• Take care to avoid contact between
the hot surfaces of the unit and the
skin, paying particular attention to
the face, neck and hands.
• To prevent the risk of injury, never
look directly into the airow of the
appliance when in use.
• Never drop the appliance or insert
any object into an opening.
• Never use while sleeping.
• Never block the air openings of the
appliance or place on a soft surface
such as a bed or couch, where the
air openings may be blocked. Keep
the air openings free of lint and
other debris.
• Do not use outdoors or operate
where aerosol (spray) products
IMPORTANT SAFETY INSTRUCTIONS
16_BABFB1BA_IB.indd 2 08/03/2016 8:51 AM

3
are being used or where oxygen is
being administered.
• Keep the cord away from heated
surfaces.
• Do not use an extension cord with
this appliance.
• Do not use if the supply cord is
damaged. In the event of damage,
it must be replaced by the
manufacturer, its service agent or
similarly qualied persons in order
to avoid a hazard.
• After use do not wrap the cord
around the appliance as in time
this may cause the cord to fracture.
Coil cord loosely by the side of the
appliance in storage.
• Always ensure that the voltage
to be used corresponds to the
voltage marked on the unit.
• For additional protection, the
installation of a residual current
device (RCD) with a rated
operating current not exceeding
30mA is advisable in the electrical
current circuit supplying the
bathroom. Ask your installer for
advice.
16_BABFB1BA_IB.indd 3 08/03/2016 8:51 AM

4
16_BABFB1BA_IB.indd 4 08/03/2016 8:51 AM

5
Professional luxury engine
MaxlifePRO technology
FERRARI designed engine
BABFB1BA- BABFB1A
FEATURES
• Fully balanced, ergonomic
design
• Accelerator for instant turbo
dr ying (1)
• Ferrari designed engine with
MaxLife™ PRO brushless
technology (2)
• Powerful 2400 watts
• Very long life, up to 10,000 hours
• Central ion generator (3)
• 6 speed and temperature
settings (4)
• Cold shot button (5)
• 2 ultra-thin nozzles (6)
• Removable rear lter (7)
• 2.8m tangle-free power cord (8)
• Hang ring (9)
• Diuser (10)
• Lightweight
MAXLIFE™ PRO TECHNOLOGY
The ItaliaBrava™ dryer is equipped
with a Ferrari designed engine,
featuring MaxLife™ PRO brushless
technology.
Conventional styling tool
motors require carbon brushes
to operate. Friction eventually
wears them down and the motor
fails. MaxLife™ PRO technology
eliminates the brushes, producing
a lighter weight motor that lasts
longer – up to 10,000 hours. Rare-
earth magnets create an ecient
and long-lasting power source
within the engine. Sealed ball
bearings reduce vibration and
help extend the life of the engine.
The ItaliaBrava™ also features a
lock-in turbo button, located at the
back of the handle. This provides
up to a 10% increase in airow
for maximum drying power,
and should be used for targeted
drying/styling. Simply press the
button once to engage the turbo
feature for drying hair that is very
wet, or for straightening very
curly, resistant sections. Press the
button again to return to normal
high-speed setting.
DRYING BASICS
1. Shampoo and condition hair.
Rinse thoroughly. Towel-blot
hair to remove excess moisture.
Section hair. Using the dryer
along with a styling brush,
direct hot air through a section
of hair at a time. Move dryer
steadily across each section so
that the hot air passes through
hair. Direct airow at hair, not
scalp.
2. Keep dryer’s air intake vents
unobstructed and free from hair
while drying.
3. To avoid over-drying and
possible damage to hair or skin,
do not concentrate heat on one
section for any length of time.
Keep dryer moving as you style.
4. When using the dryer to create
curls and waves, dry hair
almost completely on a warmer
temperature setting, then nish
styling with cooler air.
16_BABFB1BA_IB.indd 5 08/03/2016 8:51 AM

6
5. This dryer includes concentrator
attachments. Use the
attachments when you need
drying power in a small area
(such as a curl or a wave), or
when you want to relax curly
hair.
WARNING
This professional dryer is
equipped with a cold air setting,
as well as a cold shot button. Do
NOT use with the air inlet against
hair, or damage will be caused to
internal parts.
Never block the air openings
of the appliance. Keep the lter
intake free of buildup from lint,
hair and other debris by cleaning
regularly. Allowing the lter to
become blocked will decrease
performance,
shorten the life of the dryer, and
risk voiding the warranty.
NEGATIVE ION GENERATOR
The BaBylissPRO™ ItaliaBrava™
hair dryer has a central negative
ion generator that generates an
exceptional volume of millions
of ions per cm3. Hair is naturally
positively charged; this positive
charge is increased during drying
and generates static electricity,
which causes the scales of the hair
to move away from each other.
The surface of hair thus becomes
rough and takes on a lifeless
appearance.
The negative ions generated by
this hair dryer will neutralize the
positive charge and, in this way,
remove any static electricity in
the hair. Hair is shiny and easy to
style. It has been proven that ionic
technology acts as a catalyst for
hair products.
LIGHTWEIGHT AND
ERGONOMIC
The BaBylissPRO™ ItaliaBrava™ hair
dryer has an ergonomic handle
that makes it very comfortable
to use. Its light weight and ideal
balance make it perfect for the
salon.
CONCENTRATOR NOZZLES
The BaBylissP RO™ ItaliaBrava™
hair dryer comes with 2 dierent
concentrator nozzles:
- one straight, narrow 60mm
nozzle that is perfect for
straightening because it lets you
achieve the required tension on
the hair.
- one beveled, large 70mm nozzle
for smoother blow-drying; it
is slightly diagonal in shape,
hugging the shape of the brush
perfectly.
16_BABFB1BA_IB.indd 6 08/03/2016 8:51 AM

7
USER MAINTENANCE
Your dryer is virtually maintenance
free. No lubrication is needed.
The dryer must be kept clean for
proper operating performance.
When cleaning is needed, unplug
the cord, allow to cool and clean
dust and lint from air intake
openings with a small brush or
the brush attachment of a vacuum
cleaner. The outer surface of the
dryer should be wiped clean with
a cloth only.
Blocked or clogged air intake
vents will cause the dryer to
overheat. If overheating occurs, an
automatic safety device will shut
the dryer or the heat o to prevent
damage or personal injury. If the
unit or the heat cycles o, turn
the dryer o, unplug the cord,
and allow the dryer to cool for 10
to 15 minutes before restarting.
Make sure air vents are clean, by
following below steps.
1. Remove intake lter from
back of dryer by twisting
counterclockwise.
2. Reach through opening, and
press the mesh screen to release
it from the lter (Fig. 1).
3. Visually inspect the lter to
make sure no hair is caught
(Fig. 2). Rinse the mesh screen
ONLY under running water
to clear any debris. Repeat as
needed, or use a sti bristle
brush for any dicult build-up.
4. Make sure the mesh screen
is free from any debris and
completely dry. Place screen
into bottom part of removable
intake lter (Fig. 3).
5. Press with your nger around
the edge of the screen to lock
mesh screen in place (Fig. 4).
16_BABFB1BA_IB.indd 7 08/03/2016 8:51 AM

8
TWO YEAR WARRANTY
The warranty may only be claimed
where proof of original purchase
is presented, i.e. original purchase
receipt or invoice. We recommend
attaching a copy of your purchase
receipt to this instruction book
and storing in a safe place.
To make a warranty claim you
can return the defective product
back to the place it was purchased
where it will be replaced (see
point 12 in conditions). For
advice with regard to the
warranty claim process please
call Customer Service on the
phone number below or email
conairprofessional_austr[email protected]om
Trade purchasers (who have
purchased from us directly)
should contact us directly with
regard to warranty claims, either
your Conair Sales representative
or Customer Services.
Please have the following
details to hand:
1. Date of purchase
2. Details of where the product
was purchased
3. Product Name/Model Number
4. Conrm you have your purchase
receipt
5. Detail the problem with your
product
Conair Australia Pty Ltd
PO Box 146
Terrey Hills
NSW 2084
Customer Service Customer
Service
Australia: 1800 126806 New
Zealand: 0800 003618
email : conairprofessional_
[email protected]om
WARRANTY AGAINST DEFECTS
A. AUSTRALIAN CONSUMER LAW
1. Our goods come with
guarantees that cannot be
excluded under the Australian
Consumer Law. You are entitled
to a replacement or refund for a
major failure and compensation
for any other reasonably
foreseeable loss or damage.
You are also entitled to have the
goods repaired or replaced if the
goods fail to be of acceptable
quality and the failure does not
amount to a major failure. 2. The
guarantees under the Australian
Consumer Law (“ACL”) are
provided in sections 51 to 59
inclusive of the ACL (“Statutory
Guarantees”) and the remedies
are provided in sections 259
to 266 inclusive of the ACL
(“StatutoryRemedies”).
In New Zealand our goods come
with a guarantee that cannot be
excluded under the Consumer
Guarantee Act 1993.
B. BaByliss PRO EXTENDED
WARRANTY
1. In addition and subject to
the Statutory Guarantees
and Statutory Remedies, the
16_BABFB1BA_IB.indd 8 08/03/2016 8:51 AM

9
following express warranty
(“Warranty”) commences
from the date of purchase
and continues for a period of
24 months (“Warranty Period”)
after which it expires. Subject
to the conditions in Section C
below, Conair warrants to the
original purchaser (“Purchaser”)
of the BaByliss PRO product
that is the subject of this
warranty (“Product”) that if
during the Warranty Period, the
Product suers from any defect
caused by faults in materials
or workmanship, Conair will
a) replace the Product, or b)
exchange defective parts in
the Product or c) repair the
Product, as Conair may choose
in its discretion (“Warranty”). In
this Warranty “Conair” means
Conair Australia Pty Limited
(ABN 64 068 492 044) of The
Equinox Centre, Suite 101,
18 Rodborough Rd, Frenchs
Forest, NSW, 2086. in relation to
Products purchased in Australia
and Conair New Zealand Ltd in
relation to Products purchased
in New Zealand.
2. To honour the Warranty, Conair
must replace, or exchange
parts in, or repair, the Product,
as Conair determines, in
accordance with paragraph B1
above, subject always to the
conditions in Section C below.
3. If any of the conditions in Section
C below are inconsistent with
any provisions of the ACL or
regulations made there under,
those provisions of the ACL or
regulations shall prevail to the
extent of the inconsistency.
C.CONDITIONS
1. The Product must be used in
accordance with manufacturer’s
instructions. This Warranty does
not apply should the defect
in or failure of the Product be
attributable to misuse, abuse,
accident, act of God such as
lightning, or nonobservance
of manufacturer’s instructions
on the part of the user. This
Warranty does not cover
ordinary wear and tear in the
Product or its parts.
2. Conair does not accept liability
for a) any loss or damage
however suered, caused by
or arising out of any failure to
use the Product in accordance
with the manufacturer’s
instructions, and b) any indirect,
consequential or economic loss
or damage however caused.
3. This Warranty is immediately
void if – a) any serial number
or appliance plate is removed
or defaced, b) the Product has
been serviced or otherwise
repaired by a person not
authorized to do so by Conair
or where non approved
replacement parts are used.
4. The Product must be connected
to the electrical voltage supply
as specied in the ratings label
located on the Product. This
Warranty does not cover defects
16_BABFB1BA_IB.indd 9 08/03/2016 8:51 AM

10
arising from non-domestic use
or incorrect voltage supply.
5. This Warranty may only be
claimed against where proof of
original purchase is presented,
for example, original receipt or
invoice.
6. Any parts of the Product
that need to be replaced, or
if the whole Product needs
to be replaced, the replaced
Product, become the property
of Conair. The Warranty on any
replacement Product or parts
will expire on the same date
that the Warranty Period on
the original Product expires.
7. The benets provided by this
Warranty are in addition to all
other rights and remedies in
respect of the Product which
the Purchaser has under the
ACL, and applicable laws in
New Zealand, which rights
and remedies by law may
not be excluded. All other
warranties and representations
express and implied are hereby
excluded.
8. The defect must have occurred
during the Warranty Period
and Purchaser bears the onus
of proving that fact, and that
the defect was not caused by
any of the causes excluded
from this Warranty.
9. This Warranty does not cover
Products purchased from any
person who is not a retailer
serviced by Conair’s authorized
distributors or purchased
second hand.
10. The Purchaser is responsible for
all postage and freight charges
and any other expenses
incidental to claiming against
this Warranty.
11. The Warranty excludes
consumable items (such as
blades or brushes) and normal
wear and tear.
12. If you’re certain your product
is defective, and the product
is covered by the terms of this
warranty, you need to take
the product back to the place
you purchased it from, where
the retailer will replace the
product for you on our behalf.
In this event, per the terms of
this warranty you will need
to present this portion of the
warranty information and
the purchase receipt as proof
of purchase so please make
sure you keep both these
instructions and your receipt
on hand for the duration of the
warranty period.
SPARE PARTS
Replacement parts may be
available for your product.
Contact us on the phone or email
address provided for more details.
Please provide your product
name/model number details, date
of purchase and part you require.
16_BABFB1BA_IB.indd 10 08/03/2016 8:51 AM

11
16_BABFB1BA_IB.indd 11 08/03/2016 8:51 AM

QUESTIONS OR ADVICE?
Get more from your styling tool,
visit www.babylisspro.com.au
and keep up to date with news,
trends, styling tips and much more.
©2016 BaByliss PRO
Conair Australia Pty Ltd
Suite 101, 18 Rodborough Rd,
Frenchs Forest NSW 2086, Australia
Customer Service Hotline:
Australia 1800 126 806
New Zealand 0800 003 618
Customer Service e-mail:
[e-mail]
16_BABFB1BA_IB.indd 12 08/03/2016 8:51 AM