Backyard Discovery Bay Pointe User manual

Please visit www.backyarddiscovery.com
For the most up to date assembly manual, to register your product, or to order replacement parts
Para obtener instrucciones en español, visite www.backyarddiscovery.com
Made in China
INS-2200128B-A-BAY POINTE-ENG 8-24-22
Manufactured by:
Backyard Discovery
3305 Airport Drive, Pittsburg, KS 66762
800-856-4445
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: [phone]
J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: [phone]
Bay Pointe
SWING SET
MODEL: # 2200128B
INSTALLATION
SERVICES
AVAILABLE!*
See inside for details
EASY STEP-BY-STEP
3D INTERACTIVE INSTRUCTIONS
DOWNLOAD THE FREE APP
WARNING
Adult Assembly Required.
Not suitable for children under 36 months due to small parts.
FOR DOMESTIC USE ONLY. INTENDED FOR OUTDOOR USE.

Safe Play Zone
SAFE PLAY HEIGHT: 14'-3" [4.3 m]
MAXIMUM FALL HEIGHT: 5'-8 1/2" [1.7 m]
General Information:
Your set has been designed and engineered for children only and for residential use only.
A maximum of 150 lbs. per child is recommended for play activities designed for individual use.
A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use.
A maximum of 9 children is recommended for this swing set.
Swingset Ground Dimension
8'-11 3/8" [2.7m] x 10'-2 7/8" [3.1m]
Safe Play Zone
22'-1 1/4" [6.7m] x 23'-4 7/8" [7.1m]
SAFE PLAY AREA DIAGRAM
Place the set on level ground, not less than 6'-7" [2 m] from any structure or obstruction such as a
fence, garage, house, overhanging branches, laundry lines, or electrical wires.
•While assembling unit, take time before and after each phase to make sure fort is level. If fort is not level, assembly will be difficult and
improper assembly may result. Extra care must be taken to insure the fort is square.
•The safe play area refers to a zone extending 6'-7" (2m) beyond the play product on all sides, including the space above the play product.
Owner's Manual Basic Setup Dimensions & Assembly Notes
7'-8"
[2.3 m]
5'-8 1/2"
[1.7 m]
10'-2 7/8"
[3.1 m]
8'-11 3/8"
[2.7 m]
23'-4 7/8"
[7.1 m]
22'-1 1/4"
[6.7 m]
6'-7"
[2.0 m]
6'-7"
[2.0 m]
2

Owner's Manual
Wood Components (Not to Scale)
Parts Identification
RIGHT FRONT UPRIGHT - W4L15660
1 3/8"x3 3/8"x75" (36x86x1905)
E1
(1)
ANGLE BRACE - W4L13293
1 3/8"x3 3/8"x72 7/8" (36x86x1850)
E77
(2)
POST ASSEMBLY - W2A02839
1 7/16"x3 3/8"x75" (36x86x1905)
E2
(1)
ANGLE BRACE - W4L13290
15/16"x3 3/8"x11 13/16" (24x86x300)
H7
(2)
LEFT BACK UPRIGHT - W4L13210
1 3/8"x3 3/8"x75" (36x86x1905)
E3
(1)
RIGHT BACK UPRIGHT - W4L13211
1 3/8"x3 3/8"x75" (36x86x1905)
E4
(1)
UPRIGHT - W4L13283
1 7/16"x2 3/8"x43 3/4" (36x60x1111)
F1
(1)
UPRIGHT - W4L13284
1 7/16"x2 3/8"x43 3/4" (36x60x1111)
F2
(1)
TOP RAIL - W4L13219
1"x5 1/4"x37" (24x134x940)
G1
(1)
TOP RAIL - W4L13228
1"x5 1/4"x37" (24x134x940)
G2
(1)
ANGLE BRACE - W4L13288
15/16"x3 3/8"x40 1/16" (24x86x1018)
H6
(1)
FLOOR RAIL - W4L13295
1"x3 3/8"x36 5/8" (24x86x930)
H8
(1)
FLOOR RAIL - W4L13212
1"x3 3/8"x36 5/8" (24x86x930)
H1
(1)
FLOOR RAIL - W4L13221
1"x3 3/8"x24 1/8" (24x86x612)
H3
(1)
END SUPPORT - W4L13294
1"x3 1/2"x39 1/2" (24x86x1000)
H79
(1)
UPRIGHT - W4L13226
1"x2"x36" (24x52x914)
J1
(1)
FLOOR SUPPORT - W4L13222
1"x3 3/8"x3 3/8" (24x86x86)
H4
(4)
TOP RAIL - W4L13227
1"x3 3/8"x36 5/8" (24x86x930)
H5
(2)
PICKET - W4L13282
1"x2 3/8"x15 1/8" (24x60x385)
J2
(2)
FLOOR RAIL - W4L13213
1"x3 3/8"x26" (24x86x660)
H2
(2)
3

Owner's Manual
Wood Components (Not to Scale)
Parts Identification
LADDER RUNG - W4L13286
5/8"x4 3/8"x16 7/8" (16x112x430)
L4
(4)
FLOOR BOARD - W4L13224
5/8"x3 3/8"x36 5/8" (16x86x930)
M4
(5)
SIDE RAIL - W4L13214
5/8"x2 3/8"x24 1/8" (16x60x612)
N1
(7)
SIDE RAIL - W4L13218
5/8"x2 3/8"x36 5/8" (16x60x930)
N2
(3)
TOP RAIL - W4L13229
5/8"x2 3/8"x21 1/8" (16x60x538)
N4
(2)
PICKET - W4L13281
5/8"x2 3/8"x15 1/8" (16x60x385)
N6
(4)
FLOOR SUPPORT - W4L13289
15/16"x1 5/16"x17 1/4" (24x34x438)
T1
(2)
FLOOR BOARD - W4L13223
5/8"x4 3/8"x33 3/4" (16x112x856)
L1
(1)
FLOOR BOARD - W4L13225
5/8"x4 3/8"x33 3/4" (16x112x856)
L2
(1)
LADDER RUNG - W4L13285
5/8"x4 3/8"x16 7/8" (16x112x430)
L3
(1)
TOP LADDER RUNG - W4L13287
5/8"x4 3/8"x16 7/8" (16x112x430)
L5
(1)
GROUND RAIL - W4L13215
5/8"x3 3/8"x36 5/8" (16x86x930)
M1
(1)
GROUND RAIL - W4L13216
5/8"x3 3/8"x25 3/8" (16x86x644)
M2
(1)
ANGLE GROUND RAIL - W4L13217
5/8"x3 3/8"x65 5/8" (16x86x1666)
M3
(1)
GROUND RAIL - W4L13209
5/8"x3 3/8"x36 5/8" (16x86x930)
M5
(1)
SWING BEAM 2 POSITION - W4L13291
2"x5 1/4"x68 3/4" (50x134x1745)
SB74
(1)
GROUND RAIL - W4L13296
5/8"x3 3/8"x21 3/8" (16x86x542)
M6
(1)
SLIDE BRACE - W4L13297
5/8"x3 3/8"x14 1/4" (16x86x362)
M77
(1)
SLIDE BRACE - W4L13298
5/8"x3 3/8"x14 1/4" (16x86x362)
M78
(1)
TOP RAIL - W4L13220
5/8"x2 3/8"x36 5/8" (16x60x930)
N3
(1)
TOP RAIL - W4L13280
5/8"x2 3/8"x36 5/8" (16x60x930)
N5
(1)
SWING BEAM SUPPORT - W4L13292
2"x3 3/8"x44 1/4" (50x86x1123)
W71
(1)
SAFETY RAIL - W4L13299
1"x2 3/8"x36 5/8" (24x60x930)
J3
(1)
4

Owner's Manual Parts Identification
Hardware Components
SWING HANGER
5/16x9 1/2
(4)
H100099
BOLT WH
5/16x3 1/4
(4)
H100017
BOLT WH
5/16x2 1/4
(11)
H100013
BOLT WH
5/16x2
(20)
H100012
BOLT WH
5/16x1 3/4
(6)
H100011
BOLT WH
5/16x1-1/2
(8)
H100010
BOLT WH
5/16x1 1/4
(2)
H100009
BOLT WH
5/16x1/2
(8)
H100115
T-NUT
5/16
(49)
H100074
NUT BARREL WH
5/16 x 5/8
(7)
H100004
NUT BARREL WH
5/16x7/8
(10)
H100005
LAG SCREW WH
5/16x2
(22)
H100027
LAG SCREW WH
5/16x2 1/2
(8)
H100028
LAG SCREW WH
5/16x3
(1)
H100029
BOLT WH
5/16x4 1/2
(1)
H100021
BOLT WH
5/16x3/4
(4)
H100222
5

Owner's Manual Parts Identification
Hardware Components
BOLT HEX
5/16x2 3/4
(2)
H100047
SCREW PFH
8x2 1/2"
(22)
H100090
SCREW PFH
8x2
(13)
H100111
SCREW PFH
8x1 3/4
(11)
H100089
SCREW PFH
8x1 1/2
(71)
H100086
SCREW PFH
8x1 1/8
(17)
H100088
SCREW PFH
8x3/4
(9)
H100121
SCREW PWH
8x3/4
(11)
H100070
SCREW PWH
8x5/8
(11)
H100128
SCREW PWH BLK
8x3/4
(7)
H100392
WASHER SPLIT
5/16
(4)
H100095
WASHER LOCK EXT
6x15
(8)
H100138
WASHER LOCK INT
8x15
(9)
H100108
WASHER FLAT
8x27
(13)
H100105
WASHER SAFETY
17x30
(4)
H100103
WASHER LOCK EXT
8x19
(72)
H100030
WASHER LOCK EXT
8x15
(7)
H100139
T-NUT
1/4
(18)
H100072 NUT LOCK
5/16
(7)
H100110
BOLT PTH
1/4x3/4
(9)
H100063
BOLT HEX
5/16x2
(2)
H100044
BOLT HEX
5/16x1 1/4
(2)
H100042
LAG SCREW WH
1/4x2 1/2
(3)
H100649
LAG SCREW WH
1/4x1 1/2
(3)
H100145
BOLT WH
1/4x1-1/4
(2)
H100142
BOLT WH
1/4x1
(4)
H100137
BOLT WH
1/4x5/8
(7)
H100490
BOLT WH
1/4 x 1/2"
(2)
H100141
NUT BARREL WH
1/4x5/8
(7)
H100136
WASHER LOCK EXT
12x19
(11)
H100031
6

Owner's Manual
Accessory Components (Not to Scale)
Parts Identification
SWING BEAM
EXT BRACKET
BLUE - RIGHT
(1)
A4M00512
SWING BEAM
EXT. BRACKET
BLUE - LEFT
(1)
A4M00511
BYD ID TAG
(MEDIUM) AGES
3-10
(1)
A100175
90° L-BRACKET -
BLK
(6)
A4M01110
L BRACKET
2.5x38x55x55
(2)
A4M01048
"A" REVISION
TAG
(1)
A100314
L BRACKET
66x66x127 BLUE
(2)
A100153
HAND GRIP
BLUE PLASTIC
(2)
A6P00314
BLUE HC ROCK
#2
(4)
A6P00040
ROPE-CHAIN B /
SEAT B
A6P00405
(2)
T-30 TORX
WRENCH
(1)
H100114
T-30 TORX BIT
(1)
H100147 SCREW SETTER
(1)
H100764
AUGER GROUND
STAKE
(6)
A100178
MAGNETIC DRIVER
(x1)
H101100
7

Owner's Manual
Accessory Components (Not to Scale)
Parts Identification
6 FT SLIDE RAIL
LEFT
(1)
A6P00402
6 FT SLIDE RAIL
RIGHT
(1)
A6P00403
6 FT SLIDE BED
(1)
A6P00404
ROOF TARP
(1)
A6P00509
CHALK BOARD
(1)
A6P00323
MESH PANEL
(2)
A6P00401
8
PICKET PAL
(x1)
A6P00410

H100194 BOLT WH
5/16 x 2-1/2
(x2)
PRE-ASSEMBLY STEP 1 - SORTING PARTS
It is critical for ease of assembly that you take the time to sort and organize the wood and hardware.
WOOD PARTS:
• Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01).
• If there are multiple boards with the same stamped number, stack those pieces together.
• Stamps can be found on the flat surface of the boards or on the end of the boards.
• Allow yourself plenty of room - the wood pieces can take up a significant amount of space.
NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.
HARDWARE PARTS:
• We recommend that you have a separate table to organize the hardware.
• Hardware bags are printed with a seven-digit, alpha-numeric part number.
• You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.).
• During assembly you only need to reference the last four digits of the number.
9

PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED
Cordless Drill or
Electric Drill
Drill Attachments:
Phillips Head
Open End Wrenches 1/2" & 9/16"
Phillips Screw Driver
1/8", 3/16", 3/8" & 7/16"
Drill Bits
3/8" Drive Ratchet, 1/2" &
9/16" STD Sockets 1/2" & 9/16" Deep
Sockets
Claw Hammer Rubber Mallet - Optional
Tape Measure
Square
Level 24"
10

PRE-ASSEMBLY STEP 3 - CHOOSE YOUR ASSEMBLY METHOD
There are several types of assembly instructions available to you.
1. Printed Assembly Manual included with your set
2. BILT APP - 3D interactive instructions
3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two
methods)
11

STEP 1
LADDER ASSEMBLY
063 (x8)
BOLT - 3/4"
108 (x8)
WASHER - 8x15
072 (x8)
T-NUT - 1/4"
L4 (x4)
LADDER RUNG
BOLT PTH
1/4x3/4
(x8)
H100063 WASHER
LOCK INT
8x15
(8)
H100108 T-NUT
1/4
(x8)
H100072
040 (x4)
BLUE HC ROCK #2
BLUE HC ROCK #2
(x4)
A6P00040
LADDER RUNG - W4L13286
5/8"x4 3/8"x16 7/8" (16x112x430)
L4
(x4)
LEFT RUNG ASSEMBLY (x2)
RIGHT RUNG ASSEMBLY (x2)
TIP:
INSTALL THE T-NUTS FIRST
12

STEP 2
LADDER ASSEMBLY
086 (x20)
SCREW - 1 1/2"
SCREW PFH
8x1 1/2
(x20)
H100086
F2 (x1)
UPRIGHT
F1 (x1)
UPRIGHT
L3 (x1)
LADDER RUNG
LADDER RUNG - W4L13285
5/8"x4 3/8"x16 7/8" (16x112x430)
L3
(x1)
LEFT RUNG ASSEMBLY (x2)
RIGHT RUNG ASSEMBLY (x2)
UPRIGHT - W4L13284
1 7/16"x2 3/8"x43 3/4" (36x60x1111)
F2
(x1)
UPRIGHT - W4L13283
1 7/16"x2 3/8"x43 3/4" (36x60x1111)
F1
(x1)
TIP:
ALIGN HOLES IN RUNGS
WITH HOLES IN UPRIGHTS.
NOTE HOLE LOCATION
RIGHT RUNG ASSEMBLY (x2)
LEFT RUNG ASSEMBLY (x2)
13

BOLT WH
5/16x1/2
(2)
H100115 T-NUT
5/16
(2)
H100074
STEP 1
115 (x2)
BOLT - 1/2"
074 (x2)
T-NUT - 5/16"
SLIDE ASSEMBLY
M77 (x1)
SLIDE BRACE
6 FT SLIDE BED
(1)
A6P00404
1/2
SLIDE BRACE - W4L13297
5/8"x3 3/8"x14 1/4" (16x86x362)
M77
(1)
404 (x1)
6 FT SLIDE BED
NOTE:
TAKE NOTE OF SLIDE BED SURFACE FINISH, THE DULL SIDE WILL BE TOWARDS THE GROUND. PLACE SLIDE BRACE
CENTERED ON THE BOTTOM (DULL SIDE) AND 1/2" FROM THE EDGE. USE M77 BOARD AS A TEMPLATE FOR
DRILLING BOTTOM HOLE PATTERN IN SLIDE BED. USE A 5/16" DRILL BIT.
TIP:
PRE-BENDING THE ENDS WILL EASE ASSEMBLY.
PLACING THE SLIDE BED OUT IN THE SUN
MAKES IT EASIER TO BEND.
14

A HELPER IS REQUIRED FOR THIS STEP.
6 FT SLIDE RAIL RIGHT
(1)
A6P00403
SCREW PFH
8x2 1/2"
(16)
H100090
TIP:
STEP 2
NOTE:
PLACE SECOND SLIDE RAIL ASSEMBLY OVER THE TOP OF THE SLIDE BED AND M78 CENTER SLIDE BRACES. INSERT
THE SLIDE BED AND CENTER SLIDE BRACES INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY IN
THE SLIDE CAVITY. USE A RUBBER MALLET TO FULLY SEAT THE SLIDE BED INTO THE SLIDE CAVITY.
USING AN 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD BE 12
INDENTATIONS ON EACH RAIL. BE SURE TO DRILL THROUGH THE SLIDE RAIL AND THE SLIDE BED. THEN SECURE
WITH THE PROVIDED HARDWARE.
SLIDE ASSEMBLY
402 (x1)
6 FT SLIDE RAIL LEFT
403 (x1)
6 FT SLIDE RAIL RIGHT
090 (x16)
SCREW - 2 1/2"
M78 (x1)
SLIDE BRACE
6 FT SLIDE RAIL LEFT
(1)
A6P00402
SLIDE BRACE - W4L13298
5/8"x3 3/8"x14 1/4" (16x86x362)
M78
(1)
FAILURE TO INSERT SLIDE BED COMPLETELY AND SECURED MAY RESULT IN
INJURY OR AMPUTATION. EXPOSED SLIDE EDGES CAN BE SHARP AND BECOME
A LACERATION HAZARD IF THE SLIDE IS NOT PROPERLY ASSEMBLED.
15

SWING BEAM STEP 1
047 (x2)
BOLT - 2 3/4"
105 (x4)
WASHER - 8x27
110 (x2)
NUT - 5/16"
128 (x4)
SCREW - 5/8
005 (x3)
NUT BARREL - 7/8"
011 (x3)
BOLT - 1 3/4"
153 (x2)
L BRACKET 66x66x127 BLUE
512 (x1)
SWING BEAM EXT BRACKET BLUE - RIGHT
511 (x1)
SWING BEAM EXT. BRACKET BLUE - LEFT
175 (x1)
BYD ID TAG (MEDIUM) AGES 3-10
SB74 (x1)
SWING BEAM 2 POSITION
SWING BEAM 2 POSITION - W4L13291
2"x5 1/4"x68 3/4" (50x134x1745)
SB74
(1)
SWING BEAM
EXT. BRACKET
BLUE - LEFT
(1)
A4M00511
SWING BEAM
EXT BRACKET
BLUE - RIGHT
(1)
A4M00512
L BRACKET
66x66x127 BLUE
(2)
A100153
NUT LOCK
5/16
(2)
H100110
WASHER FLAT
8x27
(4)
H100105 NUT BARREL WH
5/16x7/8
(3)
H100005
BOLT WH
5/16x1 3/4
(3)
H100011
BOLT HEX
5/16x2 3/4
(2)
H100047 SCREW PWH
8x5/8
(4)
H100128
BYD ID TAG
(MEDIUM) AGES
3-10
(1)
A100175
16

SWING BEAM STEP 2
105 (x4)
WASHER - 8x27
110 (x4)
NUT - 5/16"
103 (x4)
WASHER - 17x30
099 (x4)
SWING HANGER - 9 1/2"
WASHER FLAT
8x27
(4)
H100105 NUT LOCK
5/16
(4)
H100110
WASHER SAFETY
17x30
(4)
H100103
SWING HANGER
5/16x9 1/2
(4)
H100099
17

SWING BEAM STEP 3
030 (x1)
WASHER - 8x19
021 (x1)
BOLT - 4 1/2"
005 (x1)
NUT BARREL - 7/8"
031 (x1)
WASHER - 12x19
074 (x2)
T-NUT - 5/16"
030 (x2)
WASHER - 8x19
013 (x2)
BOLT - 2 1/4
030 (x2)
WASHER - 8x19
027 (x2)
LAG SCREW - 2"
E77 (x1)
ANGLE BRACE
E77 (x1)
ANGLE BRACE
W71 (x1)
SWING BEAM SUPPORT
H79 (x1)
END SUPPORT
WASHER LOCK EXT
8x19
(5)
H100030
WASHER LOCK EXT
12x19
(1)
H100031
NUT BARREL WH
5/16x7/8
(1)
H100005
BOLT WH
5/16x2 1/4
(2)
H100013
BOLT WH
5/16x4 1/2
(1)
H100021 LAG SCREW WH
5/16x2
(2)
H100027
SWING BEAM SUPPORT - W4L13292
2"x3 3/8"x44 1/4" (50x86x1123)
W71
(1)
END SUPPORT - W4L13294
1"x3 1/2"x39 1/2" (24x86x1000)
H79
(1)
ANGLE BRACE - W4L13293
1 3/8"x3 3/8"x72 7/8" (36x86x1850)
E77
(2)
T-NUT
5/16
(2)
H100074
18

SWING BEAM STEP 4
005 (x2)
NUT BARREL - 7/8"
011 (x2)
BOLT - 1 3/4"
BOLT WH
5/16x1 3/4
(2)
H100011 NUT BARREL WH
5/16x7/8
(2)
H100005
'A' FRAME SUB ASSEMBLY
(FROM STEP 3)
SWING BEAM SUB ASSEMBLY
(FROM STEP 2)
19

FORT ASSEMBLY STEP 1
E1 (x1)
N3 (x1)
H8 (x1)
M5 (x1)
E2 (x1)
027 (x2)
LAG SCREW - 2"
030 (x2)
WASHER - 8x19
028 (x3)
LAG SCREW - 2 1/2"
TOP RAIL - W4L13220
5/8"x2 3/8"x36 5/8" (16x60x930)
N3
(1)
LAG SCREW WH
5/16x2 1/2
(3)
H100028
RIGHT FRONT UPRIGHT - W4L15660
1 3/8"x3 3/8"x75" (36x86x1905)
E1
(1)
FLOOR RAIL - W4L13295
1"x3 3/8"x36 5/8" (24x86x930)
H8
(1)
GROUND RAIL - W4L13209
5/8"x3 3/8"x36 5/8" (16x86x930)
M5
(1)
LAG SCREW WH
5/16x2
(6)
H100027
WASHER LOCK
EXT
8x19
(9)
H100030
POST ASSEMBLY - W2A02839
1 7/16"x3 3/8"x75" (36x86x1905)
E2
(1)
030 (x3)
WASHER - 8x19
027 (x4)
LAG SCREW - 2"
030 (x4)
WASHER - 8x19
NOTE HOLE LOCATIONS
20