Backyard Discovery SWEETWATER HEIGHTS 2303027 User manual

Made in China
INS-2303027-SWEETWATER HEIGHTS-ENG 04/24/2023
Please visit www.backyarddiscovery.com
For the most up to date assembly manual, to register your set, or to order replacement parts
Para obtener instrucciones en español, visite www.backyarddiscovery.com
MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive, Pittsburg, KS 66762
800-856-4445
WARNING
Adult Assembly Required.
Not suitable for children under 2 years due to sharp points and small parts.
FOR DOMESTIC USE ONLY. INTENDED FOR OUTDOOR USE.
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: [phone]
J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: [phone]
SWEETWATER HEIGHTS
PLAYHOUSE
MODEL # 2303027
The assembly manual must be retained since it contains important information .
CAN ICES-003 (B)/NMB-003(B)

Safe Play Zone
General Information:
Your set has been designed and engineered for children only and for residential use only.
A maximum of 150 lbs. per child is recommended for play activities designed for individual use.
A maximum of 120 lbs. per child is recommended for play activities designed for multiple child use.
A maximum of 6 children is recommended for this playhouse.
Ground Dimension
6'-3" [1.9 m] x 10'-1 1/4" [3.1 m]
Safe Play Area
19'-5" [5.9 m] x 23'-2 1/4" [7.1 m] x 14'-2 1/4" [4.3 m]
SAFE PLAY AREA DIAGRAM
Selecting the correct location for your play product is important for your children’s
safety and the product’s longevity
•The safe play area refers to a zone extending 6'-7" (2m) beyond the play product on all sides, including the space
above the play product.
Owner's Manual Basic Setup Dimensions & Assembly Notes
23'-2 1/4"
[7.1 m]
19'-5"
[5.9 m]
10'-0 1/4"
[3.1 m]
6'-3"
[1.9 m]
6'-7"
[2 m]
6'-7"
[2 m]
7'-7 1/4"
[2.3 m]
2'-11 3/4"
[.9 m]
SAFE PLAY HEIGHT: 14'-2 1/4" [4.3m]
MAXIMUM FALL HEIGHT: 2'-11 3/4" [.9m]
2

Owner's Manual
Wood Components (Not to Scale)
Parts Identification
LEFT FRONT UPRIGHT - W4L17837
1 3/8"x3 3/8"x62 3/8" (36x86x1584)
E1
(x1)
RIGHT FRONT UPRIGHT - W2A03762
1 3/8"x3 3/8"x62 3/8" (36x86x1584)
E2
(x1)
RIGHT REAR UPRIGHT - W4L17839
1 3/8"x3 3/8"x62 3/8" (36x86x1584)
E3
(x1)
LEFT REAR UPRIGHT - W4L17840
1 3/8"x3 3/8"x35" (36x86x889)
E4
(x1)
FLOOR RAIL - W4L17846
1"x3 3/8"x54 7/8" (24x86x1394)
H2
(x1)
COUNTER TOP SUPPORT - W4L17873
1"x3 3/8"x8 3/8" (24x86x214)
H3
(x1)
FLOOR RAIL - W4L17847
1"x3 3/8"x54 7/8" (24x86x1394)
H4
(x1)
FLOOR RAIL - W4L17845
1"x3 3/8"x56 3/4" (24x86x1442)
H1
(x2)
FLOOR SUPPORT - W4L17848
1"x3 3/8"x54 7/8" (24x86x1394)
H5
(x2)
GROUND BOARD - W4L17841
1"x5 1/4"x56 3/4" (24x134x1442)
G1
(x2)
GROUND BOARD - W4L17842
1"x5 1/4"x54 7/8" (24x134x1394)
G2
(x2)
WALL RAIL - W4L17849
1"x3 3/8"x18 1/2" (24x86x469)
H6
(x2)
WALL RAIL - W4L17850
1"x3 3/8"x56 3/4" (24x86x1442)
H7
(x1)
WALL RAIL - W4L17851
1"x3 3/8"x34 1/4" (24x86x871)
H8
(x1)
3

Owner's Manual
Wood Components (Not to Scale)
Parts Identification
FLOOR SUPPORT BLOCK - W4L17858
1"x3 3/8"x3 3/8" (24x86x86)
J1
(x3)
COUNTER TOP SUPPORT - W4L17859
1"x2 3/8"x9 1/4" (24x60x234)
J3
(x2)
FLOOR BOARD - W4L17860
5/8"x4 3/8"x52" (16x112x1321)
L1
(x1)
GABLE BOARD - W4L17862
5/8"x4 3/8"x25 3/8" (16x112x644)
L3
(x4)
FLOOR BOARD - W4L17861
5/8"x4 3/8"x54 3/8" (16x112x1382)
L2
(x1)
GROWTH BOARD - W4L17864
5/8"x3 3/8"x60 1/4" (16x86x1530)
M1
(x1)
DECK BRACE - W4L17854
1"x3 3/8"x13" (24x86x330)
H20
(x8)
LADDER RUNG - W4L17855
1"x3 3/8"x18 1/8" (24x86x460)
H76
(x3)
LEFT UPRIGHT - W4L17856
1"x3 3/8"x38 3/8" (24x86x976)
H79
(x1)
RIGHT UPRIGHT - W4L17857
1"x3 3/8"x38 3/8" (24x86x976)
H80
(x1)
ATTACHMENT BOARD - W4L17869
1"x3 3/8"x19 1/4" (24x86x488)
H110
(x1)
WALL RAIL - W4L17852
1"x3 3/8"x16 5/8" (24x86x423)
H9
(x2)
WALL RAIL - W4L17853
1"x3 3/8"x16 3/4" (24x86x426)
H10
(x2)
WALL RAIL - W4L17877
1"x3 3/8"x55 7/8" (24x86x1418)
H11
(x1)
4

Owner's Manual
Wood Components (Not to Scale)
Parts Identification
WALL BOARD - W4L17844
5/8"x3 3/8"x26 1/2" (16x86x673)
M7
(x2)
FASCIA BOARD - W4L17867
5/8"x3 3/8"x25 5/8" (16x86x652)
M33
(x4)
TIE STRAP - W4L17870
5/8"x3 3/8"x3 3/8" (16x86x86)
N1
(x8)
PICKET - W4L17872
5/8"x1 3/8"x20 1/2" (16x34x520)
O1
(x19)
WALL BOARD - W4L17866
5/8"x3 3/8"x26 1/2" (16x86x673)
M10
(x1)
SLIDE BRACE - W4L13297
5/8"x3 3/8"x14 1/4" (16x86x362)
M77
(x1)
SLIDE BRACE - W4L13298
5/8"x3 3/8"x14 1/4" (16x86x362)
M78
(x1)
WINDOW SHELF - W4L17871
5/8"x2 3/8"x19 1/8" (16x60x485)
N2
(x2)
RAIL BOARD - W4L17874
1"x1"x26 3/4" (24x24x679)
S1
(x2)
WINDOW TRIM - W4L17875
1"x1"x21 1/2" (24x24x545)
S2
(x2)
WINDOW TRIM - W4L17876
1"x1"x23 3/8" (24x24x594)
S3
(x2)
COUNTER TOP - W4L17863
1"x4 3/8"x36 3/4" (24x112x934)
Q1
(x2)
FLOOR BOARD - W4L17865
5/8"x3 3/8"x56 3/4" (16x86x1442)
M4
(x13)
FLOOR BOARD - W4L17843
5/8"x3 3/8"x56 3/4" (16x86x1442)
M6
(x1)
REAR SUPPORT - W4L17868
5/8"x3 3/8"x19 1/4" (16x86x488)
M73
(x1)
5

Owner's Manual
Wood Components (Not to Scale)
Parts Identification
WP1
(x1)
FRONT RIGHT CORNER PANEL - W2A03848
WP2
(x1)
REAR RIGHT CORNER PANEL - W2A03851
WP3
(x1)
FRONT LEFT CORNER PANEL - W2A03854
WP4
(x1)
REAR LEFT CORNER PANEL - W2A03857
WP5
(x1)
REAR CENTER PANEL - W2A03860
1 1/4"x18 7/8"x20 7/8" (32x478x536) WP6
(x1)
LEFT CENTER PANEL - W2A03861
1 1/4"x18 7/8"x20 7/8" (32x478x536)
6

Owner's Manual
Wood Components (Not to Scale)
Parts Identification
WP8
(x2)
HEADER ASSEMBLY - W2A03862
RP1
(x2)
LOWER ROOF PANEL - W2A03863
1 3/8"x13"x44 7/8" (35x329x1140)
DP1
(x1)
RIGHT DOOR PANEL - W2A03865
1 1/8"x19 1/8"x11 3/8" (27x486x288)
RP2
(x2)
UPPER ROOF PANEL - W2A03864
1 3/8"x12 3/4"x44 7/8" (35x324x1140)
7

Owner's Manual Parts Identification
Hard are Components
BOLT WH BLK
1/4x1
(x6)
H100171
NUT BARREL WH BLK
1/4x7/8
(x4)
H100399
NUT BARREL WH BLK
5/16x5/8
(x7)
H100469
T-NUT BLK
1/4
(x2)
H100398
T-NUT BLK
5/16
(x40)
H100379
SCREW SETTER
(x1)
H100764
TORX WRENCH
T-30
(x1)
H100114
MAGNETIC DRIVER
(x1)
H101100
TORX BIT
T-30
(x1)
H100147
BOLT WH BLK
5/16x1/2
(x10)
H100396
BOLT WH BLK
5/16x1
(x4)
H100468
BOLT WH BLK
5/16x1 1/2
(x6)
H100407
BOLT WH BLK
5/16x1 3/4
(x10)
H100378
BOLT WH BLK
5/16x2-1/4
(x14)
H100205
BOLT WH BLK
5/16x3 1/4
(x3)
H100484
PICKET PAL
(x1)
A6P00410
8

Owner's Manual Parts Identification
Hard are Components
SCREW PFH BLK
8x3/4
(x2)
H100395
SCREW PFH BLK
8x1
(x24)
H100385
SCREW PFH BLK
8x1 1/8
(x42)
H100380
SCREW PFH BLK
8x1 1/4
(x60)
H100387
SCREW PFH BLK
8x1 1/2
(x134)
H100200
SCREW PFH BLK
8x1 3/4
(x9)
H100382
SCREW PFH BLK
8x2
(x20)
H100391
SCREW PFH BLK
8x2 1/4
(x3)
H100483
SCREW PFH BLK
8x2-1/2
(x28)
H100201
SCREW PWH BLK
8x1/2
(x8)
H100408
SCREW PWH BLK
8x5/8
(x12)
H100202
SCREW PWH BLK
8x3/4
(x8)
H100392
SCREW PWH BLK
8x1
(x6)
H100797
SCREW POH BLK
8/32x1 1/8
(x12)
H100806
T-NUT
8/32
(x12)
H100804
LAG SCREW WH BLK
5/16x2
(x24)
H100458
LAG SCREW WH BLK
1/4x1 1/2
(x10)
H100403
WASHER LOCK EXT BLK
8x19
(x57)
H100198
WASHER LOCK EXT BLK
12x19
(x7)
H100199
WASHER LOCK EXT BLK
6x15
(x16)
H100405
WASHER LOCK EXT BLK
8x15
(x4)
H100400
9

Owner's Manual
Accessory Components (Not to Scale)
Parts Identification
90° L-BRACKET - BLK
(x8)
A4M00555
HAND GRIP GREEN PLASTIC
(x2)
A100028
BYD ID TAG (MEDIUM) AGES 2 TO 10
(x1)
A4M00528
L BRACKET 2.5x38x55x55
(x3)
A4M01047
PLASTIC SUNBURST
(x2)
A100361
KNOB - BLK
(x1)
A6P00067
FAUCET KIT
(x1)
A6P00024
SURFACE MOUNT BASIN
(x1)
A6P00032
AUGER GROUND STAKE
(x4)
A100178
10

Owner's Manual
Accessory Components (Not to Scale)
Parts Identification
HINGE (DOOR, SPRING LOADED)
(x1)
A4M00624 HINGE (DOOR, NON-SPRING LOADED)
(x1)
A4M00994
DOOR STOP
(x1)
A4M00933
6FTSLIDERAILLEFT
(x1)
A6P00389
6FTSLIDERAILRIGHT
(x1)
A6P00390
6 FT SLIDE BED
(x1)
A6P00391
BELL ASSEMBLY
(x1)
A4M01045
11

Owner's Manual
Accessory Components (Not to Scale)
Parts Identification
BOIL POT
(x1)
A6P00336
FRY PAN
(x1)
A6P00338
POT/PAN LID
(x2)
A6P00337
SPATULA
(x1)
A6P00339
LADLE
(x1)
A6P00340
INDUCTIVE BURNER KIT
(x1)
A6P00330
BLENDER
(x1)
A6P00331
STOVE BASE
(x1)
A6P00335
12

Owner's Manual Electronics Safety Warnings
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
--Consult the dealer or an experienced radio/TV technician for help
Caution: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
CLASS B DIGITAL DEVICE STATEMENT
13

H100194 BOLT WH
5/16 x 2-1/2
(x2)
PRE-ASSEMBLY STEP 1 - SORTING PARTS
It is critical for ease of assembly that you take the time to sort and organize the wood and hardware.
WOOD PARTS:
• Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01).
• If there are multiple boards with the same stamped number, stack those pieces together.
• Stamps can be found on the flat surface of the boards or on the end of the boards.
• Allow yourself plenty of room - the wood pieces can take up a significant amount of space.
NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.
HARDWARE PARTS:
• We recommend that you have a separate table to organize the hardware.
• Hardware bags are printed with a seven-digit, alpha-numeric part number.
• You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.).
• During assembly you only need to reference the last four digits of the number.
14

PRE-ASSEMBLY STEP 2 - TOOLS REQUIRED
Cordless Drill or
Electric Drill
Drill Attachments:
Phillips Head Open End Wrenches 1/2" & 9/16"
Phillips Screw Driver
1/8", 3/16", 3/8" & 7/16"
Drill Bits
3/8" Drive Ratchet, 1/2" &
9/16" STD Sockets 1/2" & 9/16"
Deep Sockets
Claw Hammer Rubber Mallet - Optional
Tape Measure
Square
Level 24"
15

PRE-ASSEMBLY STEP 3 - CHOOSE YOUR ASSEMBLY METHOD
There are several types of assembly instructions available to you.
1. Printed Assembly Manual included with your set
2. BILT APP - 3D interactive instructions
3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two
methods)
16

TIP:
BOLT WH BLK
5/16x1/2
(2)
H100396 T-NUT BLK
5/16
(2)
H100379
STEP 1
PLACE 'M77' SLIDE BRACE BOARD 1/2" FROM THE BOTTOM EDGE OF THE SLIDE BED. USING THE BOARD AS A TEMPLATE,
MARK WHERE THE PILOT HOLES WILL BE DRILLED. USE A 3/8" DRILL BIT TO DRILL THE PILOT HOLES INTO THE SLIDE BED.
ATTACH THE SLIDE BED SUPPORT BOARD USING THE HARDWARE PROVIDED.
391 (x1)
6 FT SLIDE BED 396
(x2)
BOLT - 1/2"
379 (x2)
T-NUT - 5/16"
SLIDE ASSEMBLY
M77 (x1)
SLIDE BRACE
6 FT SLIDE BED
(1)
A6P00391
1/2"
SLIDE BRACE - W4L13297
5/8"x3 3/8"x14 1/4" (16x86x362)
M77
(1)
PRE-BENDING THE ENDS WILL EASE ASSEMBLY.
PLACING THE SLIDE BED OUT IN THE SUN
MAKES IT EASIER TO BEND.
17

A HELPER IS REQUIRED FOR THIS STEP.
6 FT SLIDE RAIL RIGHT
(1)
A6P00390
SCREW PFH BLK
8x2-1/2
(16)
H100201
TIP:
STEP 2
NOTE:
SLIDE ASSEMBLY
389 (x1)
6 FT SLIDE RAIL LEFT
390 (x1)
6 FT SLIDE RAIL RIG T
201 (x16)
SCREW - 2 1/2"
M78 (x1)
SLIDE BRACE
6 FT SLIDE RAIL LEFT
(1)
A6P00389
SLIDE BRACE - W4L13298
5/8"x3 3/8"x14 1/4" (16x86x362)
M78
(1)
1. PLACE THE SLIDE RAIL ON FLAT SURFACE. STARTING AT THE BOTTOM, INSERT THE SLIDE BED INTO THE
CHANNEL ON THE INSIDE OF THE RAIL. HOLD THE SLIDE BED IN PLACE WHILE A HELPER BENDS THE SLIDE BED
INTO THE CHANNEL. MAKE SURE THE SLIDE BED IS COMPLETELY INSERTED INTO THE CHANNEL. SEE VIEWING
WINDOW BELOW.
2. INSERT THE TWO CENTER SLIDE BRACES INTO THEIR RESPECTIVE LOCATIONS.
3. USE A 1/8" DRILL BIT, DRILL PILOT HOLES IN EACH INDENTATION ALONG EACH SIDE RAIL. THERE SHOULD BE 12
INDENTIONS ON EACH RAIL. BE SURE TO DRILL THOUGH THE SLIDE RAIL AND THE SLIDE BED. THEN SECURE WITH
THE PROVIDED HARDWARE.
REPEAT THIS PROCESS FOR THE OPPOSITE SLIDE RAIL.
FAILURE TO INSERT SLIDE BED
COMPLETELY AND SECURED BY SCREWS
MAY RESULT IN INJURY OR AMPUTATION.
EXPOSED SLIDE EDGES CAN BE SHARP
AND BECOME A LACERATION HAZARD IF
THE SLIDE IS NOT PROPERLY ASSEMBLED.
VIEWING WINDOW
18

LADDER ASSEMBLY
H76 (x3)
H79 (x1)
391 (x6)
SCREW - 2"
LEFT UPRIGHT - W4L17856
1"x3 3/8"x38 3/8" (24x86x976)
H79
(x1)
LADDER RUNG - W4L17855
1"x3 3/8"x18 1/8" (24x86x460)
H76
(X3)
SCREW PFH BLK
8x2
(x6)
H100391
STEP 1
19

LADDER ASSEMBLY
RIGHT UPRIGHT - W4L17857
1"x3 3/8"x38 3/8" (24x86x976)
H80
(x1)
391 (x6)
SCREW - 2"
H80 (x1)
SCREW PFH BLK
8x2
(x6)
H100391
STEP 2
20