Backyard 1802513 User manual

• Owner's Manual
• Frequently Asked Questions
• Assembly Instructions
• Warranty Information
14 x10 PERGOLA
OUTDOOR PRODUCT
MODEL: # 1802513
Backyard Discovery
3305 Airport Drive
Pittsburg, KS 66762
1-800-856-4445
Made in China
INS-1802513-A-14x10 PERGOLA-ENG 10/27/17
Features the fastening system.
Register your new (Outdoor Product) on-line @
www.backyarddiscovery.com (you will also find any updates on
assembly instructions and information to order replacement parts)
Save this assembly manual for future reference in the event that
you need to order replacement parts.

PLEASE HAVE THE FOLLOWING INFORMATION WHEN YOU MAKE YOUR CALL:
1 – MODEL NUMBER OF THE PRODUCT LOCATED ON THE FRONT OF THE ASSEMBLY MANUAL
2 – DESRIPTION OF THE PART FROM THE PARTS LIST
CUANDO LLAME, TENGA LA SIGUIENTE INFORMACIÓN A LA MANO:
1 - NÚMERO DE MODELO DEL PRODUCTO, QUE SE ENCUENTRA EN EL FRENTE DEL MANUAL DE EN
SAMBLAJE.
2 - DESCRIPCIÓN DE LA PIEZA, SEGÚN SE ENCUENTRA EN LA LISTA DE PIEZAS

PLEASE READ THIS BEFORE STARTING ASSEMBLY
LEA ESTO ANTES DE COMENZAR CON EL ENSAMBLAJE
STOP
ALTO
Missing A Part?
CALL US BEFORE GOING
BACK TO THE STORE!
The store where you made your purchase
does not stock parts for this item.
If you have assembly questions or if you need parts,
whether they are missing or damaged
Call Toll-Free Help Line or visit www.backyarddiscovery.com
¡LLÁMENOSANTESDEREGRESARALATIENDA!
Laendadonderealizólacompranoalmacenapiezasdeesteproducto.
Sienepreguntassobreelensamblajeosinecesitapiezasdebidoaque
faltanoestándañadas
llamegrasalalíneadeayuda
1-800-856-4445
 READTHEASSEMBLYMANUALCOMPLETELY,PAYINGSPECIALATTENTIONTOTHEIMPORTANTTIPSANDSAFE-
TYINFORMATION.
 AFTERYOUHAVEREADTHEASSEMBLYMANUAL,YOUWILLBEABLETODECIDEIFYOUNEEDPROFESSIONAL
HELPTOCOMPLETETHEASSEMBLYOFTHESTRUCTURE.
 SEPARATEANDIDENTIFYALLPARTSTOMAKESURETHATYOUHAVEALLOFTHEPARTSLISTED.
 IFYOUCAN’TFINDALLOFTHEPARTS,CHECKTHEPACKINGMATERIAL.SMALLPARTSMAYHAVEFALLENINTOIT
DURINGSHIPMENT.
 IFYOUHAVEPROBLEMSWITHTHEASSEMBLYORIFANYPARTISMISSINGORDAMAGED,PLEASECALLTHE
HELPLINE1‐800‐856‐4445 OR VISIT www.backyarddiscovery.com
 
 LEAESTEMANUALDEENSAMBLAJECOMPLETAMENTE,YPONGAATENCIÓNESPECIALALOSCONSEJOSIMPOR-
TANTESYALAINFORMACIÓNDESEGURIDAD.
 DESPUÉSDEHABERLEÍDOELMANUALDEENSAMBLAJE,PODRÁDECIDIRSINECESITAAYUDAPROFESIONALPA-
RAAYUDARLEATERMINARDEENSAMBLARLAESTRUCTURA.
 SEPAREEIDENTIFIQUETODASLASPIEZASPARAASEGURARSEDEQUETENGATODASLASPIEZASENUMERADAS.
 SINOPUEDEENCONTRARTODASLASPIEZAS,REVISEELMATERIALDEEMPAQUE.LASPIEZASPEQUEÑASPUE-
DENHABERSECAÍDODURANTEELENVÍO.
• MANTÉNGASEALEJADODELOSNIÑOSMENORESALAEDADRECOMENDADA.
 SITIENEPROBLEMASCONELENSAMBLAJE,OSIALGUNAPIEZAFALTAOESTÁDAÑADA,LLAMEALALÍNEADE
AYUDAAL1‐800‐856‐4445 O VISITE www.backyarddiscovery.com

Owner’s Manual Outdoor Product
ENG OWNER OP-2012
Dear Customer:
Please read entire booklet completely before beginning the assembly process.
Structures are not intended for public use. The Company does not warranty any of its
residential structures subjected to commercial use such as: Recreational Park, or any
similar Commercial Application.
Please follow all recommendations below. ailure to do so may result in the warranty
being void and/or safety violations that could result in serious injury. This manual
contains helpful information concerning Assembly Preparation, Installation Procedure,
and Required aintenance. Always keep safety in mind as your structure is being built.
PLEASE RETAIN THESE INSTRUCTIONS OR UTURE RE ERENCE. KEEP THEM IN A SA E
PLACE WHERE YOU CAN RE ER TO THEM AS NEEDED. IN ORDER TO PROVIDE YOU
WITH THE MOST E ICIENT SERVICE, IT IS REQUIRED THAT YOU PROVIDE US WITH THE
PART NUMBERS WHEN ORDERING PARTS.
or Your Records:
Please take time and fill out the information below. This information will be needed for
warranty issues.
Where Purchased: ______________
Date of Purchase: ________________
Installation Date: _______________
Installed by: ______________________
Tracking Number Reference Label
Tracking ID number on the carton and back of the ID plate are included for
tracking purposes associated with warranty claims.
Staple Receipt Here

Owner’s Manual Outdoor Product
ENG OWNER OP-2012
Maintenance Instructions:
1. Check all nuts and bolts twice monthly during the usage season and tighten as required.
(But not so tight that you crack the wood) It is particularly important that this
procedure be followed at the beginning of each season.
2. Oil all metallic moving parts monthly during the usage period.
3. Check all coverings for bolts and sharp edges twice monthly during usage season to be
certain they are in place. Replace when necessary. It is especially important to do this
at the beginning of each new season.
4. For rusted areas on metallic members such as hinges, brackets, etc. sand and repaint,
using a non lead-based paint meeting the requirements of Title 16 CRF Part 1303.
5. Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season
causing splinters to appear. Light sanding may be necessary to maintain a safe
environment. Treating your Product with protection (sealant) after sanding will help
prevent severe checking/splitting and other weather damage.
6. We have applied a waterborne translucent stain to your unit. This is done for color only.
Once or twice a year, depending on your climate conditions, you must apply some type
of protection (sealant) to the wood of your unit. Prior to the application of sealant,
lightly sand any “rough” spots on your set. Please note this is a requirement of your
warranty.

Outdoor Product Assembly Manual FAQs:
1. Is the wood treated with chemicals? Backyard Discovery uses 100% Chinese Cedar
wood which is naturally bug resistant, decay and rot resistant. To help ensure your
family’s safety, our wood is completely chemical free and we do not use pressure-
treated wood. The stain we use is a top coat using a water-based product that is for
appearance only.
2. How often should the product be stained? Backyard Discovery recommends the
product be stained once each year. A water or oil based stain can be used at the
customer’s discretion.
3. Why does it seem that my product is developing cracks? Wood is a natural material;
no two pieces are exactly alike. Each piece has its own characteristics and
personality and reacts differently to environmental changes. When any wood
product is exposed to the elements, it develops “wood checks”. A check is the radial
separation of the wood fibers running with the grain of the wood. These are caused
by the varying temperature and moisture conditions. A check is not a crack – it does
not affect the strength or durability of the wood or structural integrity of the product.
4. Do Backyard Discovery products come with a warranty? Yes. All Backyard
Discovery products carry a 1-year replacement warranty on all parts for
manufacturer’s defect. Our wood carries a 5 year pro-rated warranty on rot and
decay as well. Please see warranty details for more information.
5. What is the best way to get started assembling the product? Backyard Discovery
recommends taking all the parts out of the boxes and arranging them by part
number before you begin any assembly. This will not only allow faster assembly, but
will also identify any parts that may be missing or damaged so they can be replaced
before assembly. If parts are missing or need replacement, go to
www.backyarddiscovery.com/support.aspx and follow the prompts to order them.
Next, read the assembly manual and get the tools ready for the job as
recommended in the manual. If the assembly manual is lost or misplaced a new one
can be printed from Backyard Discovery’s website: www.backyarddiscovery.com .
6. The 2”x4” boards do not measure 2”x 4”. Why not? In the U.S. it is common practice
to describe lumber dimensions using the rough cut sizes from the saw mill and not
the finished dimensions. Retailers, home stores, etc. all use this accepted practice
for describing lumber dimensions. However, Backyard Discovery products are
designed and constructed using the actual dimensions so everything fits properly
and remains so during the life of the product.
For more information and frequently asked questions, please refer to our website at
www.backyarddiscovery.com .

(Level 24")
(Square)
(Tape Measure)
(Cordless Drill or Electric Drill)
(Drill Attachments: Phillips
Head & Socket Driver)
(An Adult w/ an Adult Helper)
(Rubber Mallet - Optional)
(Ladder)
(Phillips Screw Driver)
(3/16" Concrete
Drill Bit)
Tools Required for Installation:
(These are the tools that are generally required for assembly of our outdoor products. These tools
are not included with the outdoor product purchase.)

Important Assembly Notes
1) While assembling unit, take time before and after each phase to make sure unit is level. If unit is
not level, assembly will be difficult and improper assembly may result. Extra care must be taken to
ensure the unit is square.
2) Pay close attention to the ITEMS NEEDED FOR EACH PHASE. They can be a valuable aid when
sorting your wood and hardware. Assembly will be made easier if items are sorted by phase.
3) Pay close attention to make sure you are using the correct hardware in the correct phases. Using
incorrect hardware may result in improper assembly.
4) Whenever a T-nut is used, follow these directions. Place T-nut in pre-drilled hole. Tap in with hammer.
Place bolt with washers in the opposite side. Hand tighten to make sure the bolt is in the T-nut.
DO NOT over tighten.
5) Read the steps of each phase thoroughly. The written steps may include important information not
shown in the illustrations.
Basic Setup Dimensions
Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such
as a fence, garage, house, overhanging branches, laundry lines, or electrical wires.
10'
14'
6'
6'
6'-75/8"
7'-111/4"
10'-11 3/8"
12'- 3/4"
6'-11 1/4"
8'- 3/4"

Parts Identification
Wood Components
(NOT TO SCALE)
D1 - JOIST - W4L11635
1 3/8"x5 1/4"x92 7/8" (36x134x2360)
(2)
D2 - JOIST END - W4L11643
1 3/8"x5 1/4"x37 1/2" (36x134x954)
(4)
D3 - SLOTTED JOIST - W4L11637
1 3/8"x5 1/4"x114" (36x134x2896)
(8)
D4 - JOIST - W4L11636
1 3/8"x5 1/4"x90" (36x134x2286)
(2)
D5 - JOIST - W4L11638
1 3/8"x5 1/4"x90" (36x134x2286)
(2)
D6 - JOIST END - W4L11633
1 3/8"x5 1/4"x15" (36x134x381)
(8)
D7 - JOIST END - W4L11634
1 3/8"x5 1/4"x37 1/2" (36x134x954)
(4)
D8 - LONG ANGLE BRACE - W4L11641
1 3/8"x5 1/4"x37 1/8" (36x134x942)
(8)
D9 - SHORT ANGLE BRACE - W4L11642
1 3/8"x5 1/4"x29 3/4" (36x134x755)
(4)

Parts Identification
Wood Components
(NOT TO SCALE)
D11 - JOIST - W4L11646
1 3/8"x5 1/4"x92 7/8" (36x134x2360)
(2)
P1 - PURLIN - W4L11639
1 3/8"x1 3/8"x69 5/8" (36x36x1767)
(12)
P2 - PURLIN - W4L11640
1 3/8"x1 3/8"x90 1/4" (36x36x2291)
(12)
WP1 - PERGOLA POST - W2A02600
5 1/2"x5 1/2"x89 1/2" (140x140x2273)
(4)

Parts Identification
Hardware
- T-30 TORX WRENCH - H100114
(2)
- T-30 TORX BIT - H100147
(2)
- T-40 TORX BIT - A100042
(2)
- T-40 TORX WRENCH - A100041
(2)
- BOLT WH 5/16x7-1/4 BLK - H100196
(26)
- BOLT WH 5/16x2-1/4 BLK - H100205
(42)
- SCREW PFH 8x2-1/2 BLK - H100201
(100)
- SCREW PFH 8x1-1/2 BLK - H100200
(17)
- WASHER LOCK EXT 8x19 BLK - H100198
(96)
- WASHER LOCK EXT 12x19 BLK - H100199
(68)
- NUT BARREL WH 5/16x7/8 BLK - H100192
(42)
- LAG SCREW WH 5/16x3 BLK - H100206
(13)
- NUT BARREL WH 5/16x1-1/2 BLK - H100193
(26)
- SCREW PWH 8x5/8 BLK - H100202
(2)
- LAG SCREW WH 5/16x5-1/2 BLK - H100204
(18)
- SCREW PFH 8x1/2 BLK - H100203
(2)
- CONCRETE ANCHOR 1/4" x 2" - H100120
(18)

Parts Identification
Accessories
(NOT TO SCALE)
HT - FOOT 142 SQUARE POST - A100029
(4)
XR - BYD ID TAG (SMALL) WITHOUT AGES - A100241(1)
SQ - "A" REVISION TAG - A100314
(1)
- STAIN MARKER - A6P00171
(1)

STEP 1
D4 - JOIST - W4L11636
1 3/8"x5 1/4"x90" (36x134x2286)
(2)
D9 - SHORT ANGLE BRACE - W4L11642
1 3/8"x5 1/4"x29 3/4" (36x134x755)
(4)
BUILD BOTH SIDES
***HAND TIGHEN ONLY AT THIS TIME***
D9
D9
D4
WASHER LOCK EXT 12x19 BLK
(8 PLCS)
NUT BARREL WH 5/16x7/8 BLK
(8 PLCS)
BOLT WH 5/16x2-1/4 BLK
(8 PLCS)
WASHER LOCK EXT 8x19 BLK
(8 PLCS)
BOLT WH
5/16x2-1/4
BLK
(8)
WASHER
LOCK EXT
8x19 BLK
(8)
WASHER
LOCK EXT
12x19 BLK
(8)
NUT
BARREL WH
5/16x7/8 BLK
(8)

STEP 2
D2 - JOIST END - W4L11643
1 3/8"x5 1/4"x37 1/2" (36x134x954)
(4)
D11 - JOIST - W4L11646
1 3/8"x5 1/4"x92 7/8" (36x134x2360)
(2)
D8 - LONG ANGLE BRACE - W4L11641
1 3/8"x5 1/4"x37 1/8" (36x134x942)
(4)
BUILD BOTH SIDES
D2
D2
D11D8
D8
WASHER LOCK EXT 12x19 BLK
(16 PLCS)
NUT BARREL WH 5/16x7/8 BLK
(16 PLCS)
BOLT WH 5/16x2-1/4 BLK
(16 PLCS)
WASHER LOCK EXT 8x19 BLK
(16 PLCS)
BOLT WH
5/16x2-1/4
BLK
(16)
NUT
BARREL WH
5/16x7/8 BLK
(16)
WASHER
LOCK EXT
12x19 BLK
(16)
WASHER
LOCK EXT
8x19 BLK
(16)

STEP 3
D1
D1 - JOIST - W4L11635
1 3/8"x5 1/4"x92 7/8" (36x134x2360)
(2)
D7 - JOIST END - W4L11634
1 3/8"x5 1/4"x37 1/2" (36x134x954)
(4)
D8 - LONG ANGLE BRACE - W4L11641
1 3/8"x5 1/4"x37 1/8" (36x134x942)
(4)
BUILD BOTH SIDES
BOLT WH
5/16x2-1/4
BLK
(16)
NUT
BARREL WH
5/16x7/8 BLK
(16)
WASHER
LOCK EXT
12x19 BLK
(16)
WASHER
LOCK EXT
8x19 BLK
(16)
D7
D7
D8
D8
NOTE HOLE
LOCATIONS
WASHER LOCK EXT 12x19 BLK
(16 PLCS)
NUT BARREL WH 5/16x7/8 BLK
(16 PLCS)
BOLT WH 5/16x2-1/4 BLK
(16 PLCS)
WASHER LOCK EXT 8x19 BLK
(16 PLCS)

STEP 4
D5 - JOIST - W4L11638
1 3/8"x5 1/4"x90" (36x134x2286)
(2)
WP1 - PERGOLA POST - W2A02600
5 1/2"x5 1/2"x89 1/2" (140x140x2273)
(4)
BUILD BOTH SIDES
123456789101112131415
13
12
11
10
9
8
7
6
5
4
3
2
1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
17 18 19
20 21 22 23
2221201918171615141312111098765432
1
!
NOTE HOLE
LOCATIONS
LAG SCREW WH 5/16x3 BLK
(2 PLCS)
WASHER LOCK EXT 8x19 BLK
(2 PLCS)
NUT BARREL WH 5/16x1-1/2 BLK
(4 PLCS)
WASHER LOCK EXT 12x19 BLK
(4 PLCS)
BOLT WH 5/16x7-1/4 BLK
(4 PLCS)
WASHER LOCK EXT 8x19 BLK
(4 PLCS)
LAG SCREW
WH 5/16x3
BLK
(4)
NUT
BARREL WH
5/16x1-1/2
BLK
(8)
WASHER
LOCK EXT
12x19 BLK
(8)
WASHER
LOCK EXT
8x19 BLK
(12)
BOLT WH
5/16x7-1/4
BLK
(8)
D5
WP1
WP1
ASSEMBLY FROM
STEP 1

STEP 5
D6 - JOIST END - W4L11633
1 3/8"x5 1/4"x15" (36x134x381)
(8)
NUT
BARREL WH
5/16x1-1/2
BLK
(8)
WASHER
LOCK EXT
12x19 BLK
(8)
WASHER
LOCK EXT
8x19 BLK
(8)
BOLT WH
5/16x7-1/4
BLK
(8)
BOLT WH 5/16x7-1/4 BLK
(8 PLCS)
WASHER LOCK EXT 8x19 BLK
(8 PLCS)
WASHER LOCK EXT 12x19 BLK
(8 PLCS)
NUT BARREL WH 5/16x1-1/2 BLK
(8 PLCS)
BUILD BOTH SIDES
D6 X 8

STEP 6
123456789101112131415
13
12
11
10
9
8
7
6
5
4
3
2
1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
19
20 21 22 23
2221201918171615141312111098765432
1
!
ASSEMBLY FROM
STEP 5
ASSEMBLY FROM
STEP 2
ASSEMBLY FROM
STEP 3
ASSEMBLY FROM
STEP 3
ASSEMBLY FROM
STEP 2
ASSEMBLY FROM
STEP 5
NUT BARREL WH 5/16x1-1/2 BLK
(8 PLCS)
WASHER LOCK EXT 12x19 BLK
(8 PLCS)
BOLT WH 5/16x7-1/4 BLK
(8 PLCS)
LAG SCREW WH 5/16x3 BLK
(8 PLCS)
WASHER LOCK EXT 8x19 BLK
(16 PLCS)
LAG SCREW
WH 5/16x3
BLK
(8)
NUT
BARREL WH
5/16x1-1/2
BLK
(8)
WASHER
LOCK EXT
12x19 BLK
(8)
WASHER
LOCK EXT
8x19 BLK
(16)
BOLT WH
5/16x7-1/4
BLK
(8)
NOTE HOLE
LOCATION
NOTE HOLE
LOCATION

STEP 7
D3 - SLOTTED JOIST - W4L11637
1 3/8"x5 1/4"x114" (36x134x2896)
(8)
WASHER LOCK EXT 8x19 BLK
(16 PLCS)
LAG SCREW WH 5/16x5-1/2 BLK
(16 PLCS)
WASHER
LOCK EXT
8x19 BLK
(16)
LAG SCREW
WH
5/16x5-1/2
BLK
(16)
D3 X 8

STEP 8
P1 - PURLIN - W4L11639
1 3/8"x1 3/8"x69 5/8" (36x36x1767)
(12)
P2 - PURLIN - W4L11640
1 3/8"x1 3/8"x90 1/4" (36x36x2291)
(12)
P1 P1 P1 P1 P1 P1
P2
P1
P1 P1 P1
P1
P1
P2
SCREW PFH 8x2-1/2 BLK
(96 PLCS)
SCREW PFH
8x2-1/2 BLK
(96)

STEP 9
123456789101112131415
13
12
11
10
9
8
7
6
5
4
3
2
1
1
2 3 4 5 6 7
8 9 10
11 12 13 14 15
16 17 18 19 20 21 22 23
2221201918171615141312111098765432
1
!
HT - FOOT 142 SQUARE POST - A100029
(4)
FOOT 142 SQUARE POST
(4 PLCS)
IF PLACING PERGOLA ON CONCRETE, PLACE THE PERGOLA
EXACTLY WHERE IT WILL BE ANCHORED WHEN COMPLETED
AND SLIDE A FOOT UNDER EACH POST.
NOTE:
IF NOT PLACING ON CONCRETE, PROCEED TO STEP 13.
SQUARE POSTS AND TIGHTEN
ALL BOLTS AND SCREWS AT
THIS TIME.