Baicells EG7035 User manual

All rights reserved © BaiCells Technologies Co., Ltd.
BaiCells EG7035 User Manual
V1.0

1
About This Document
This document introduces the specifications of BaiCells EG7035 CPE and guides users to
install and configure it.
Copyright Notice
BaiCells copyrights this specification. No part of this specification may be reproduced in
any form or means, without the prior written consent of BaiCells.
Disclaimer
This specification is preliminary and is subject to change at any time without notice.
BaiCells assumes no responsibility for any errors contained herein. For more information,
please consult our technical engineers.
Revision Record
Date
Version
Description
Author
15 Jun,2015
V1.0
Initial released.
Tang Houcheng
Contact Us
E-mail: [e-mail]
Phone: [phone]
Website: http://www.baicells.com/

Contents
1. Product Overview.......................................................................................................1
Introduction .............................................................................................................. 11.1
Features..................................................................................................................... 11.2
Product Description.................................................................................................... 21.3
Appearance ............................................................................................................... 21.4
Interface and Button ................................................................................................ 31.5
LED Indicators ........................................................................................................... 31.6
2. Technical Specifications...............................................................................................4
Basic Specification.................................................................................................... 42.1
RF Specification ........................................................................................................ 42.2
SW Specification ....................................................................................................... 42.3
Device Management .................................................................................................. 52.4
Environment Specification ......................................................................................... 52.5
Regulatory Compliance .............................................................................................. 62.6
3. Product Installation.......................................................................................................8
1.1 Installation Steps ............................................................................................................. 8
4. CPE Configuration .......................................................................................................9
Log in .......................................................................................................................... 94.1
Basic Configuration .................................................................................................... 94.2
Network Mode.................................................................................................... 94.2.1
LTE Setting ........................................................................................................ 104.2.2
Setting Connect Method .................................................................................. 114.2.3
Manual Connect Network ................................................................................ 114.2.4
Setting Scan Mode............................................................................................ 124.2.5
Setting Frequency (Earfcn) ............................................................................... 124.2.6
APN Management ............................................................................................ 134.2.7
FAQs.........................................................................................................14Appendix A

2
A.1 The POWER indicator does not turn on. .................................................................. 14
A.2 Fails to Login to the web management page........................................................... 14
A.3 The CPE fails to search for the wireless network..................................................... 14
A.4 The power adapter of the CPE is overheated. ......................................................... 14
A.5 The parameters are restored to default values. ...................................................... 14
Product List ..............................................................................................15Appendix B

Contents of Figure
Figure 1-1 EG7035 Appearance ..................................................................................2
Figure 1-2 Interface and Button of EG7035.................................................................3
Figure 3-1 Install the Sample..........................................................................................8
Figure 3-2 Connection Diagram ......................................................................................8
Figure 4-1 Login Page..................................................................................................9
Figure 4-2 Setup Network Mod..................................................................................10
Figure 4-3 LTE Setting................................................................................................10
Figure 4-4 Setup Connect Method.............................................................................11
Figure 4-5 Setup Scan Mode .....................................................................................12
Figure 4-6 Setting frequency......................................................................................13
Figure 4-7 APN Management.....................................................................................13

Contents of Table
Table 1-1 EG7035 Product Description........................................................................2
Table 1-2 EG7035 Appearance Index..........................................................................2
Table 1-3 Description of EG7035 Interface and Button ...............................................3
Table 1-4 LED Indicators..............................................................................................3
Table 2-1 Basic Specification .......................................................................................4
Table 2-2 RF Specification ...........................................................................................4
Table 2-3 SW Specification ..........................................................................................4
Table 2-4 Device Management.....................................................................................5
Table 2-5 Environment Specification............................................................................6

1
1. Product Overview
Introduction1.1
Baicells is a high-tech company dedicated in wireless broadband access solutions and
service operation. With the advent of the Internet+ era, the development of WBB is
imminent. Through continuous innovation, Baicells launches the world first mobile
broadband system based on the Internet architecture and unlicensed spectrum.
Baicells can provide serious CPEs, include indoor and outdoor unit on different
spectrums.
Baicells EG7035 is a high performance outdoor CPE. EG7035 has the superior
wireless access performance and comprehensive routing capabilities, which have the
abilities to bring the end-users WBB services.
Features1.2
EG7035 is designed according to the simplicity principle, which can evolve in a short
period and realize fast customization, delivery and deployment as well. The main
features of EG7035 is as follows:
Support TD-LTE network according to the operator’s choice.
LTE comply to 3GPP Release9 CAT4.
LTE TDD 3650MHz - 3700MHz
Support the 100Mbps Ethernet WAN.
Intuitionist and convenient Web-based management.
Built-in LTE bipolar directional high gain antenna.
Support TR069 and OMA-DM network management protocol.
Support Cell lock. SIM lock. Pin lock.
User-friendly design of LED indicator.
Power supply with PoE.

2
Protection support IP67.
Support pole installation or wall mounting.
Product Description1.3
EG7035 CPE product is shown in Table 1-1.
Table 1-1 EG7035 Product Description
Product
Description
EG7035
3.65G LTE Customer Premise Equipment
Appearance1.4
The appearance of EG7035 is shown in Figure 1-1, and is described in Table 1-2.
Figure 1-1 EG7035 Appearance
Table 1-2 EG7035 Appearance Index
Index
Description
Dimension
About 280mm * 280mm * 135mm
Weight
About 1000g
Color
French grey

3
Interface and Button1.5
The interface of EG7035 is shown in Figure 1-2, and is described in Table 1-3.
Figure 1-2 Interface and Button of EG7035
Table 1-3 Description of EG7035 Interface and Button
Connectors
Description
ETH RJ45
One LAN
USIM Slot
Support 1.8V/3.0V USIM
Restore Button
Long press over 10s to restore the factory settings
LED Indicators1.6
Table 1-4 LED Indicators
LED Name
Description
Color
LED Behavior
Status Indicator
PWR
Power
Indicator
Green
OFF
No Power Supply
Steady On
Power On
LTE Signal
3 LTEs,
Indicate
connection
state and
signal
strength
Green
All OFF
No Connected
ALL blanking
Connecting
One LED Steady
On
Connected, the
signal is weak
Two LED Steady
On
Connected, the
signal is medium
Three LED Steady
On
Connected, the
signal is strong
LAN
Eth Indication
Green
OFF
Ethernet connection
is not established
Steady On
Ethernet connection
is normal
Blanking
Ethernet interface
data being
transmitted

4
2.Technical Specifications
Basic Specification2.1
Table 2-1 Basic Specification
Specification
Description
Comment
LTE Standard
3GPP Release 9
None
Ethernet LAN
Port
One RJ-45 port 10/100
auto-sensing, auto-MDX, 12V ~
24V PoE
None
LED Indicators
Power/LET Signal/LAN Indicator
None
USIM
Support 1.8V/3.3V 2FF USIM
None
Restore Button
Tact Button
Long press over 10s
to restore the
factory settings
Power Supply
Input: Universal range
100~240V AC
Output: 12V 1A
None
RF Specification2.2
Table 2-2 RF Specification
Feature
Capability
Value
Unit
LTE Mode
TDD LTE
None
Channel Bandwidth
5/10/15/20
MHz
MAX Output Power
17
dBm
LTE Standard
3GPP R9
None
Frequency
3650 ~ 3700
MHz
Antenna Gain
19.5
dBi
SW Specification2.3
Table 2-3 SW Specification
Item
Description
Language Settings
English
Network Mode
Bridge / NAT