3
Orifice
Pre-AssemblyInstructionsForYourSafety
Spidersand small insectscanspinwebsand
nestinthegrill BurnerTubes during transitand
warehousing which canleadtoagas flow
obstruction resulting inafireinand around the
BurnerTubes.Thistypeof"FLASHBACK FIRE"
cancause seriousgrill damageand createan
unsafeoperating condition fortheuser.
Toreduce thechance ofFLASHBACK
FIREyou mustcleantheBurner Tubes
as followsbefore assembling yourgrill.
Alsodo thisatleastonceamonthinsummer
and fall orwheneverspidersareactiveinyour
area,and ifyourgrill has notbeenusedforan
extendedperiod oftime.
Failuretocomplywiththese instructionscould
resultinafireorexplosion thatcouldcause
seriousbodilyinjury,deathorpropertydamage.
Forsafeoperation ensuretheGas ValveAssembly
OrificeisinsidetheBurnerTubebeforeusing your
grill.See figure.IftheOrificeisnotinsidetheBurner
Tube,lightingtheBurnermaycause explosion
and/orfireresulting inseriousbodilyinjuryand/or
propertydamage.
TOCLEANBURNER
TUBE,INSERTHOOK
HERE
1.
2.
3.
4.
Foot
Burner
BurnerPort
METHOD 1:Bend astiff wireorwirecoat
hangerintoasmall hook as shownand run
thehook through theBurnerTubeand inside
theBurnerseveraltimes toremovedebris.
METHOD 2:Use abottlebrushwithaflexible
handleand run thebrushthrough theBurner
Tubeand insidetheBurnerseveraltimes to
removeanydebris.
METHOD 3:Use anairhose toforceair
through each BurnerTube.Theforcedair
shouldpass debrisorobstructionsthrough
theBurnerand outthePorts.
9
GrillInformationCenter1-800-770-9769
8am-4:30pmCST,MondaythroughFriday
ToolsRequiredforAssembly:
protectiveworkgloves
protectiveeyewear
Youwillneedassistancefromanotherpersonto
handlethegrill headand otherlarge,heavy parts.
OpenLidofshipping carton and removetop sheet
ofcardboardand /orpacking materials.Lay
cardboardsheeton floorand use as aworksurface
toprotectfloorand grill partsfromscratches.
You mayslicethecarton frontcornerswithautility
knifetolayopenthecarton frontpanel.Thisallows
you toraise thegrill headLidand removethe
componentspackedinside,making iteasiertolift.
UsetheHardwareand Part Diagramstoensureall
itemsareincludedand freeofdamage.
Donotassembleoroperatethegrill ifitappears
damaged.If therearedamaged ormissingparts
whenyou unpack theshipping boxoryou have
questions during the assemblyprocess,callthe:
Toexpeditethe assemblyprocess followthese
generalguidelines:
NOTE: Thisgas grill isdesignedtobeusedwithtwo
20lbLPGas tanks(notincluded)for8burneropera-
tion.Atank placedon therightwill operatethefour
right-sideburners.Atank placedon theleftwill
operatethefourleft-side burners.
•
•
•PhillipsHeadScrewdriver
GrillInstallation Codes
Theinstallationmustconformwithlocalcodesor,inthe
absenceoflocalcodes,withthe NationalFuelGas Code,
ANSIZ223.1/NFPA54,orthe NaturalGasand Propane
Installation Code,CSAB149.1,as applicable,including:
1.The applianceand itsindividualshutoff valvemustbe
disconnectedfromthegas supplypiping system
during anypressuretesting ofthatsystemattest
pressures inexcess of1/2psi(3.5kPa).
2.Theappliancemustbeisolatedfromthegas supply
pipingsystembyclosing itsindividualmanualshutoff
valveduring anypressuretesting ofthegas supply
piping systemattestpressureequaltoorless than
1/2psi(3.5kPa).
Removethescrewfromtherearofeach Burner
usingaPhillipsHeadScrewdriver.
Carefullylift eachBurnerupandaway fromthe
GasValveOrifice.
CheckandcleanBurner/VenturiTubesfor
insectsand insectnests.Acloggedtubecan
leadtoafirebeneaththegrill.
Refertothefigurebelowand performoneof
these 3cleaning methods:
GasValve
WARNING
! !
