BalanceFrom 291338 Instruction manual

BALANCEFROM SAFETY GATE
MODEL NO: 291338, 292385, 291433, 43348, 433527, 433575, 575622
READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF GATE.
KEEP INSTRUCTIONS FOR FUTURE USE.
BALANCEFROM LLC
740 Vintage Ave. Ontario, CA 91764
[e-mail]
[phone]

Assembly and InstallationInstructions
Read and follow all instructions carefully to ensure that
your gate and extensions are properly installed.
Improper installationcould result in the gatebecoming
unstable or dislodgedfrom the doorway. Thesafety of
your child is your responsibility. Please keep these
instructions for your reference.
If using this gate at the top of
stairs, the four Wall Cups are
recommended.
NOTE:
•In ten ded for y oun g c hil dre n age d 6 mon ths through 24 mon ths . Chec k the gate
regul arl y to s ee i f al l the hardware an d moun ti n gs are ti ghten e d.
•To prevent serious injury or death, securely install gate or enclosure and use
according to manufacturer’s instructions. Never use with a child able to climb
over or dis lodge the gate or enclos ure.
•Never leave child unattended.
•Contact BalanceFrom for questions and replacement parts.

IN THE BOX
A. Gate Frame (comes with all models) B. 4x Threaded Spindle Rods (comes withall models)
C.#4.72”#Extension
Model#291385:#1x
Model#291433:#2x
Model#433527:#1x
Model#433575:#2x#
D.#14.17”#Extension
Model#43348:#1x
Model#433527:#1x
Model#433575:#1x#
E.#28.35”#Extension
Model#575622:#1x
F.#Anchor
(comes#with#extensions)

STEP 1
Rubber F oot Adjustment bolt
Rotate#the#adjustment#bolts#along#the#threading.#Shrink#the#space#
between#adjustment#bolt#and#rubber#foot.
STEP 2
Insert 4 spindle rods intothe holes at 4 corners of the gate frame
(or extensions).

STEP 3
Pla ce the g ate i n the center of your doorway or opening. Make
sure the gate is leveled.
Check the position of the gate. If you are satisfied with the
position, twist the four adjustment bolts until the mark line on
the lock stick is about in parallel with the lock slot opening.
Now the installation is successfully done.

STEP 4
How to open?
Pull back the l atch and lift the gate a t the same time.
STEP 4
Adding extension(s)?
Insert extension(s) intothe gate or extension(s). Then follow
insert spindle rods into extension(s). Put anchorat the
connection of gate and extension.