Balboa Water Group BP1500 User manual

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
1
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
BP1500 Tech Sheet
Balboa Water Group
Part Number: 56125-01 4kW 800 Incoloy Element
56126-01 With 4kW Titanium Element
Compatible Plumbing Kits (Coupling nuts and seals included)
55911 2” Tailpieces (2-Speed Pump 1)
55914 1.5” Tailpieces (2-Speed Pump 1)
55912 1” Tailpiece Inserts (Circ)
55913 One Direct Circ Pump Coupling and one 1” Tailpiece Insert
UL System Model: BP15-BP1500-BJ
Software ID: M100_200 V5
Software Version: 5.0
Hex File: BP1500_5.0_BP15TP4.hex
Configuration Signature: BB565841
Eng. Project: 3607
Base PCBs / PCBA’s:
Power Board: 22117_B / 56128
Logic Board: 22121_E / 56127-01
Control Panels:
TP 600 55673-05
Software Version 2.3 and later
TP400T 50260
Software Version 2.4 and later
TP400W 50259
Software Version 2.4 and later
Auxiliary Panels
AX10A2 55919
User Interface and Programming Guide:
http://service.balboa-instruments.com/zz40940_download.zip

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
2
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Part # EPN Date Originator Changes Made
55697
and
55700
2277 05-19-09 Balboa Initial Generic Configuration
800 Incoloy and Titanium models
Initial release
06-09-09 Balboa Minor corrections and clarification. Add J23 / J32 connection for Misc.
08-01-09 BWG Minor corrections, hardware revs and firmware update
08-14-09 BWG Tech Sheet update
3297 12-01-09 BWG Software update and configuration update (remove GFCI Test Feature)
3333 02-09-10 BWG Wiring Diagram Update to Rev B Power Board and Rev C Logic Board
3333 02-17-10 BWG Software update to Version 3.0
3333 03-12-10 BWG P1 Low Timeout Update. Add Setup Change Reference
3479 10-11-10 BWG RMA Tester and eFAST compatibility added, Transformer Update
55697
and
55700
3607 09-15-11 BWG TP400 support, Auto Linking, Set Time moved to menu
N/A 01-10-12 BWG Correction: Pump 1 Low timeout is 30 minutes, not 120 minutes
System Revision History
Service - Input Power Requirements (Circle Letter Assignment)
B240VAC, 60Hz, 48A, Class A GFCI-protected service (Circuit Breaker = 60A max.),
4 wires [hot, hot, neutral, ground]
C120/240VAC, 60Hz, 16/32A, Class A GFCI-protected service (Circuit Breaker = 20/40A max.),
3 or 4 wires [hot, hot (optional), neutral, ground]
D240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
A120/240VAC, 60Hz, 16/40A, Class A GFCI-protected service (Circuit Breaker = 20/50A max.),
3 or 4 wires [hot, hot (optional), neutral, ground]
H240VAC, 60Hz, 32A, Class A GFCI-protected service (Circuit Breaker = 40A max.),
4 wires [hot, hot, neutral, ground]
F120VAC, 60Hz, 16A, Class A GFCI-protected service (Circuit Breaker = 20A max.),
3 wires [hot, neutral, ground]
Y120/240VAC, 60Hz, 16/48A, Class A GFCI-protected service (Circuit Breaker = 20/60A max.),
3 or 4 wires [hot, hot (optional), neutral, ground]
Service - Input Power Requirements (Circle Letter Assignment)
()
B
240VAC, 60Hz, 48A, Class A GFCI-protected service (Circuit Breaker = 60A max.),
4
wires [
h
ot,
h
ot, neutra
l
,
g
roun
d
]
C
1
20
/
240VAC, 60Hz, 16
/
32A, C
l
ass A GFCI-protecte
d
service
(
Circuit Brea
k
er = 20
/
40A max.
)
,
3 or 4 wires [hot, hot
(
optional
)
, neutral, ground]
D
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker = 50A max.)
4
wires
(
Hot–Line 1, Hot–Line 2, Neutra
l
, Groun
d)
A
1
20
/
240VAC, 60Hz, 16
/
40A, C
l
ass A GFCI-protecte
d
service
(
Circuit Brea
k
er = 20
/
50A max.
),
3 or 4 wires [
h
ot,
h
ot
(
optiona
l)
, neutra
l
, groun
d
]
H240VAC, 60Hz, 32A, C
l
ass A GFCI-protecte
d
service
(
Circuit Brea
k
er = 40A max.
)
,
4
wires [hot, hot, neutral, ground]
F
1
20VAC, 60Hz, 16A, Class A GFCI-protected service (Circuit Breaker = 20A max.),
3 wires [
h
ot, neutra
l
,
g
roun
d
]
Y
1
20
/
240VAC, 60Hz, 16
/
48A, C
l
ass A GFCI-protecte
d
service
(
Circuit Brea
k
er = 20
/
60A max.
)
,
3 or 4 wires [hot, hot (optional), neutral, ground]

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
3
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
2” Tailpiece kit PN 55911.
Standard 2” sockets to glue up to 2” PVC pipe.
1.5” Tailpiece kit PN 55914.
1.5” sockets to glue up to 1.5” PVC pipe with the I.D.
Be sure to orient the fittings so that the insert is at the 12:00 position to prevent trapped air.
1” Circ Pump Insert kit PN 55912.
1” barb fittings for use with 1” tubing.
Be sure to orient the fittings so that the insert is at the 12:00 position to prevent trapped air.
1” Circ Pump Insert kit PN 55913.
One fitting for direct coupling to the threaded suction of an appropriately-sized circ pump. A 1” barb fitting for use with 1”
tubing is used on the other end of the heater.
Be sure to orient the fittings so that the insert is at the 12:00 position to prevent trapped air.
Plumbing Fittings
Not Immediately Available.
Not Immediately Available.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
4
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
System Ouputs:
Pump 1 240VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Pump 2 240VAC 1-Speed 12A max 15-minute timer
Ozone 240VAC .5A max Uses the same relay as Pump 1 Low
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Misc. J23 & J32 120VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 1 – As Manufactured
Refer to Page 3 to choose a suitable Plumbing Kit.
WS01
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*
SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
1S PUMP 2
WHITE
BLACK
RED
GRN
4.0 kW

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
5
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
System Ouputs:
Pump 1 240VAC 1-Speed 12A max 15-minute timer
Pump 2 240VAC 1-Speed 12A max 15-minute timer
Circ Pump 240VAC 1-Speed 5A max Programmable Filtration Cycles + Polling
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Ozone 240VAC .5A max Uses the same relay as the Circ Pump
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Misc. J23 & J32 120VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 2
WS02
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED
CONTROL PANEL
TO J33 AUX
TO J5
S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
1S PUMP 2
WHITE
BLACK
RED
GRN
4.0 kW
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . .1-Speed Pump 1
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . .Circ Pump Enabled
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
6
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
System Ouputs:
Pump 1 240VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Blower 240VAC 1-Speed 8A max 15-minute timer
Ozone 240VAC .5A max Uses the same relay as Pump 1 Low
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Misc. J23 & J32 120VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 3
WS03
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
BLOWER
WHITE
BLACK
RED
GRN
4.0 kW
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Blower
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
7
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
System Ouputs:
Pump 1 240VAC 1-Speed 12A max 15-minute timer
Blower 240VAC 1-Speed 8A max 15-minute timer
Circ Pump 240VAC 1-Speed 5A max Programmable Filtration Cycles + Polling
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Ozone 240VAC .5A max Uses the same relay as the Circ Pump
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Misc. J23 & J32 120VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 4
WS04
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
BLOWER
WHITE
BLACK
RED
GRN
4.0 kW
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . . . . . . . 1-Speed Pump 1
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Blower
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . . . . . . . Circ Pump Enabled
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
8
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
System Ouputs:
Pump 1 240VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Ozone 240VAC .5A max Uses the same relay as Pump 1 Low
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Misc. J23 & J32 120VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 5
WS05
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
1S PUMP 2NOT USED
WHITE
BLACK
RED
GRN
4.0 kW
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
9
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
240VAC, 60Hz, 40A, Class A GFCI-protected service (Circuit Breaker rating = 50A max.)
4 wires (Hot–Line 1, Hot–Line 2, Neutral, Ground)
System Ouputs:
Pump 1 240VAC 1-Speed 12A max 15-minute timer
Circ Pump 240VAC 1-Speed 5A max Programmable Filtration Cycles + Polling
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Ozone 240VAC .5A max Uses the same relay as the Circ Pump
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 4kW @ 240VAC
Misc. J23 & J32 120VAC 4A max Hot output (Stereo). Fused equipment or in-line fuse required.
Wiring Diagram and Settings
Setup 6
WS06
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
1S PUMP 2NOT USED
WHITE
BLACK
RED
GRN
4.0 kW
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . . . . . . . 1-Speed Pump 1
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . . . . . . . Circ Pump Enabled
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
10
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
120/240VAC, 60Hz, 16/40A, Class A GFCI-protected service (Circuit Breaker = 20/50A max.),
3 or 4 wires [hot, hot (optional), neutral, ground]. Do not use this setup with a 3 kW heater.
System Ouputs:
Pump 1 120VAC 2-Speed 12A max 30-minute timer for Low Speed, 15 Minutes for High Speed
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Ozone 120VAC .5A max Uses the same relay as Pump 1 Low
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 1kW @ 120VAC or 4kW @ 240VAC
Misc. J23 & J32 Not Applicable with 120V Heater.
Wiring Diagram and Settings
Setup 7
WS07
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
NOT USED
2S PUMP 1
1S PUMP 2NOT USED
ADDED JUMPER FOR
120VAC HEATER SYSTEM
REMOVE FOR 240V HEATER
GRN BLK
GFCI
1.0 kW
120v to 240v heater conversion instructions:
1, Conversion must be performed by a qualified, licensed electrician.
2, Disconnect from power and remove power cord.
3, Completely remove jumper wire between J29 and J33 and discard.
4, Install 240V power conductors; Line 1, Line 2 and Neutral to main terminal block (TB1)
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
11
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Power Requirements:
120/240VAC, 60Hz, 16/40A, Class A GFCI-protected service (Circuit Breaker = 20/50A max.),
3 or 4 wires [hot, hot (optional), neutral, ground]. Do not use this setup with a 3 kW heater.
System Ouputs:
Pump 1 120VAC 1-Speed 12A max 15-minute timer
Circ Pump 120VAC 1-Speed 1.5A max Programmable Filtration Cycles + Polling
This is the heater pump and must be the same voltage as the Ozone
Must deliver a minimum of 20 GPM through heater
Ozone 120VAC .5A max Uses the same relay as the Circ Pump
Must be the same voltage as heater pump
Spa Light 12VAC On/Off 1A max 4-Hour timer.
Heater 1kW @ 120VAC or 4kW @ 240VAC
Misc. J23 & J32 Not Applicable with 120V Heater.
Wiring Diagram and Settings
Setup 8
WS08
L2
L1
N
F3 10A 250V F2 3A 250V
F6 0.3A 250V
J44
J48
J1
J2
J24
J45
J49
J15
J16
J47
J13 J27
J25 J26 J23 J33
J28 J30 J31 J32 J29
J12
J46
J20
J57
J8 J14 J22 J21
J56
F5 30A
GND
K3
K5 K6
K2
K1
K4
OZONE
22117_B
RED AC
GND
GND
WHT AC
HTR A
HTR B
UNFUSED S1
J45
J46
F4 3A 250V
J18 J19
K7
T1
J15
J33
J31 HCE
J30 TST
J27
H3
J22
J26 H2
J25 H1
J17
J16
J29 VAC
J28 AUX FRZ
J5
LIGHT
ON
22121_E
1
6
CONTROL PANEL
TO J33 AUX
TO J5
ALL UNUSED SWITCHES
SHOULD BE OFF
STORE SETTINGS*
SPECIAL AMPERAGE RULE OFF
DON’T ADD 4 HS PUMPS W/HTR
DON’T ADD 2 HS PUMPS W/HTR
DON’T ADD 1 HS PUMP W/HTR
TEST MODE OFF
MEMORY RESET*
SPECIAL AMPERAGE RULE ON
ADD 4 HS PUMPS WITH HEAT
ADD 2 HS PUMPS WITH HEAT
ADD 1 HS PUMP WITH HEAT
TEST MODE ON
6
5
4
3
2
1
ON POSITION S1 SWITCH # OFF POSITION
*SWITCH # 6SHOULD BE SET TO OFF
UPON FINAL INSTALLATION.
SENSOR A SENSOR B
CIRC
1S PUMP 1
1S PUMP 2NOT USED
ADDED JUMPER FOR
120VAC HEATER SYSTEM
REMOVE FOR 240V HEATER
GRN BLK
GFCI
1.0 kW
Software Configuration Changes based on Default
Feature Orig. Setup 1 Changes to
J8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-Speed Pump 1 . . . . . . . . . . . . 1-Speed Pump 1
J14, TP600 Button 2, TP400 Button 4, LED 2, AX10A2. . . . . . . . . Pump 2 . . . . . . . . . . . . . . . . . . Not Used
J21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Not Used (non-circ) . . . . . . . . . . Circ Pump Enabled
120v to 240v heater conversion instructions:
See previous page.
Blue indicates changes from the original Setup 1 default
Refer to Page 3 to choose a suitable Plumbing Kit.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
12
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Setup Changes with DIP Switch 1 ON
As soon as Switch #1 is placed
in the ON position,
The temperature will show
“T” after it instead of F or C,
indicating the System is
in Test Mode
1
S1
6
J17
J16
J29 VAC
J28 AUX FRZ
ON
DANGER! HIGH VOLTAGE WILL BE ACCESSIBLE!
SERVICE TECHNICIAN ONLY!
Move DIP Switch 1 (on S1 on the Logic circuit
board) to ON.
The system will enter Test Mode.
Moving DIP Switch 1 to OFF will exit Test Mode.
Read and understand these instructions before beginning this process.
Know the Setup Number you want before you power up the spa and wait to power up the spa until you’re ready to change
the Setup Number.
The system must be in Test Mode, so move Switch 1 to the ON position. The Test Menu will then be available.
Power up the spa, and press any button once to Link the panel. (Note: Switch 1 can be moved to the ON position immedi-
ately after power-up, if preferred - Danger! High Voltage will be present!)
You will have 1 minute to complete the setup change after you manually exit Priming Mode. (Once familiar with the pro-
cess, the Setup change should take less than 15 seconds.)
When the panel displays RUN PMPS PURG AIR, press any Temperature button ONCE to exit Priming Mode.
You should see “---T” where the T indicates the system is in Test Mode.
Continued on Next Page.
READY RANGE

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
13
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Setup Changes – Continued
SET SET
The System will reset and go into Priming Mode if the Light Button
is pressed while anything other than the current setup is flashing.
If there is no change to the Setup Number (S-01, S-02, etc.),
the display returns to the SETP screen.
Several Setups can
exist in in this string
A dash (--) indicates the current Setup.
SET
SET SET
SET SET
SET SET
While the Set Temperature is
still flashing, press Light
TEST will now appear in
the LCD first.
SET RANGE
Main Screen
READY RANGE FLTR1
Main Screen
READY RANGE FLTR1
SET
Approx.
5 sec.
or
Approx.
5 sec.
or
SET
SET
SET
SET
When set to ON, Panel will display
alternate readings from
Senor A and Sensor B
on Main Screen
Displays Fault Log
Again, You will have 1 minute to complete the setup change after you manually exit Priming Mode.
Immediately after exiting Priming Mode, press this sequence of buttons: Warm*, Light, Warm, Warm, Warm, Warm. Continue
to press Warm until the diplay shows the Setup Number (S-01, S-02, etc.) you want to switch to. When the correct setup
number is showing, press Light once, and the system will reset, using the newly-selected Setup from that point on.
Move DIP Switch 1 to the OFF position to take the spa out of Test Mode. °F or °C will replace °T.
Using a permanent marker, write the Setup number on the Setup label mounted inside the system
lid (right). This is very important to any service person in the future who may need to replace a
circuit board or system and needs to change the Setup on a replacement part while in the field.
NOTE: Changing the Setup may require wiring changes as well - refer to the wiring diagram or wiring
diagram addendum.
THIS SYSTEM IS
CONFIGURED AS
SETUP #
*If the Control Panel does not have a Warm (Up) button, but rather a single
Temp button, use the Temp button in place of the Warm button in the instruction
above. (The flow chart assumes a single Temperature Button.)
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel configuration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time - varies depending on function

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
14
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Configuration Options
General Features
Feature Default Options Increment
Pump 1 in Filter Cycle (Circ Only) No Yes, No
Pump 1 Low Timer 30 Minutes Between 5 and 240 minutes 1 Minute
General Pump Timer 15 Minutes Between 5 and 60 minutes 1 Minute
Blower Timer 15 Minutes Between 5 and 60 minutes 1 Minute
Mister Timer (N/A) 15 Minutes Between 5 and 60 minutes 1 Minute
Light Timer 240 Minutes Between 5 and 240 minutes 1 Minute
Circ Like P1 Low See Circ Pump Note N/A
Circ Pump can be set with the following functions:
24 hr – 24 hr w/3° shutoff – Acts like P1 Low (filters, polls, etc. - Requires a single-speed P1)
Cleanup Cycle 30 Minutes Between 30 and 240 minutes 30 Minutes
- or OFF
Cleaup as Preference setting Yes Yes, No N/A
Ozone Always Always, Filters/Cleanup Only N/A
Ozone Suppression OFF Between 30 and 120 min. 1 Minute
- or OFF
Pump Purge 60 Seconds Between 30 and 600 seconds 5 Seconds
Blower Purge 30 Seconds Between 5 and 300 seconds 5 Seconds
Mister Purge (N/A) 5 Seconds Between 5 and 300 seconds 5 Seconds
Blue Indicates New Custom Configuration Default (Setup 1)
O
p
tions Increment
Yes, No
Between 5 and 240 minutes 1 Minute
Between 5 and 60 minutes 1 Minute
Between 5 an
d
60 minutes 1 Minute
Between 5 an
d
60 minutes 1 Minut
e
Between 5 an
d
240 minutes 1 Minute
See Circ Pum
p
Not
e
N
/
A
B
et
w
ee
n
30
a
n
d
2
40
min
utes
30
Min
utes
- or OF
F
Yes, No N/A
Always, Filters/Cleanup Only N/A
Between 30 an
d
120 min. 1 Minute
-
o
r
O
F
F
Between 30 and 600 seconds 5 Second
s
Between 5 an
d
300 secon
d
s 5 Secon
ds
Between 5 an
d
300 secon
d
s 5 Secon
d
s
C
irc Pump can be set with the following functions:
2
4 hr – 24 hr w/3° shutoff – Acts like P1 Low
(
filters, polls, etc. - Requires a single-speed P1
)

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
15
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Configuration Options
Temperature Features
Feature Default Options Increment
Temperature Display °F °C, °F
All temperatures must be specified in °F. The system converts °F to °C dynamically. If Celsius is required for default settings,
choose a desired °C value that (after rounding) corresponds to a Fahrenheit value.
°C 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
°F 39 41 43 45 46 48 50 52 54 55 57 59 61 63 64 66 68 70 72
°C 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
°F 73 75 77 79 81 82 84 86 88 90 91 93 95 97 99 100 102 104
Hi-Range Min. Set Temp 80°F Between 50 and 80°F 1°F
Hi-Range Max. Set Temp 104°F Between 60 and 104°F 1°F
Hi-Range Default Temp* 100°F Between 50 and 104°F 1°F
Lo-Range Min. Set Temp 50°F Between 50 and 80°F 1°F
Lo-Range Max. Set Temp 99°F Between 60 and 99°F 1°F
Lo-Range Default Temp* 70°F Between 50 and 99°F 1°F
Freeze Threshold 44°F Between 39 and 54°F 1°F
Temp Lock Type Temp + Settings Temp, Temp + Settings N/A
Time Features
Feature Default Options Increment
Time Format* 12 Hour 12 Hour, 24 Hour N/A
Filter 1 Start Hour* 8:00 PM (20:00) 00:00 to 23:00 1 Hour
Filter 1 Duration* 2 Hours Between 15 Min and 23:45 15 Minutes
-or continuous
Filter Cycle 2 Default* OFF OFF, ON N/A
Filter 2 Start Hour* 8:00 AM (08:00) 00:00 to 23:00 1 Hour
Filter 2 Duration* 15 Minutes Between 15 Min and 23:45 15 Minutes
-or Continuous, or Disabled
Light Cycle Disabled Disabled, Enabled N/A
Light Cycle Default* OFF OFF, ON N/A
Light Cycle Start Hour* 9:00 PM (21:00) 00:00 to 23:00 1 Hour
Light Cycle Duration* 15 Minutes Between 15 Min and 04:00 15 Minutes
-or or Disabled
Blue Indicates New Custom Configuration Default (Setup 1)
*May be changed by end-user (if Enabled)
O
p
tions Increment
°C, °
F
Between 50 and 80°F 1°F
Between 60 and 104°F 1°F
Between 50 and 104°F 1°F
Between 50 an
d
80°F 1°F
Between 60 an
d
99°F 1°F
Between 50 and 99°F 1°F
B
et
w
ee
n
39
a
n
d
54
°F 1°
F
Temp, Temp + Settings N
/
A
Opt
i
ons Increment
12 Hour, 24 Hour N
/
A
00:00 to 23:00 1 Hou
r
B
et
w
ee
n 1
5
Min
a
n
d
2
3:45
1
5
Min
utes
-
o
r
co
n
t
in
uous
OFF, ON N/A
00:00 to 23:00 1 Hou
r
Between 15 Min an
d
23:45 15 Minute
s
-or Continuous
,
or Disa
bl
e
d
Disa
bl
e
d
, Ena
bl
e
d
N
/
A
OFF, ON N
/
A
00:00 to 23:00 1 Hou
r
Between 15 Min and 04:00 15 Minute
s
-
o
r
o
r Di
sabled

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
16
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Configuration Options
Reminder Features
Feature Default Options Increment
Reminders Shown* Yes Yes, No N/A
Check pH OFF See Reminder Period Note 1 Days
Check Sanitizer OFF See Reminder Period Note 1 Days
Clean Filter 30 Days See Reminder Period Note 1 Days
Test GFCI 65 Days See Reminder Period Note 1 Days
Drain Water 100 Days See Reminder Period Note 1 Days
Change Cartridge OFF See Reminder Period Note 1 Days
Clean Cover OFF See Reminder Period Note 1 Days
Treat Wood OFF See Reminder Period Note 1 Days
Change Filter 365 Days See Reminder Period Note 1 Days
Reminder Periods can be set between 7 and 180 days. In addition, 365 days can be chosen.
Each reminder can be turned OFF individually.
Special Features
Feature Default Options Increment
Special Amperage Rule 1 No Limitation 1 Pump
Special Amperage Rule 2 No Limitation 1 Pump
1 to 7 pumps can run on high speed together.
Blower can be allowed or suppressed when number of pumps selected is reached.
“No Limitation” does not restrict pump or blower operation.
DIP Switch 5 is used to choose Special Amperage Rule 1 or 2.
Drain Mode Disabled Disabled, Enabled N/A
Demo Mode Disabled Disabled, Enabled N/A
Automatic GFCI Test Disabled Disabled, 1-7 Days 1 Day
When GFCI Test is Enabled, the Auto-Test can be set between 1 and 7 days from startup
Ozone Slaved to Heater Pump Yes Yes, No N/A
Blue Indicates New Custom Configuration Default (Setup 1)
*Editable by end-user
O
p
tions Increment
Y
es, No N
/A
See
R
e
min
de
r P
e
ri
od
N
ote
1
D
a
y
s
See
R
e
min
de
r P
e
ri
od
N
ote
1
D
ays
See Remin
d
er Perio
d
Note 1 Days
S
ee Remin
d
er Perio
d
Note 1 Days
S
ee Remin
d
er Perio
d
Note 1
D
a
y
s
See
R
e
min
de
r P
e
ri
od
N
ote
1
D
a
y
s
See
R
e
min
de
r P
e
ri
od
N
ote
1 Days
S
ee Remin
d
er Perio
d
Note 1 Days
See Remin
d
er Perio
d
Note 1 Da
y
s
Disabled, Enabled N
/
A
Disabled, Enabled N
/
A
D
isa
bl
e
d
, 1-7 Days 1 Day
da
y
s from startu
p
e
s, No N/A
O
p
tions Increment
1 Pum
p
1 Pum
p
1
to 7
p
um
p
s can run on
h
i
gh
s
p
ee
d
to
g
et
h
er.
B
l
ower can
b
e a
ll
owe
d
or suppresse
d
w
h
en num
b
er o
f
pumps se
l
ecte
d
is reac
h
e
d
.
“No Limitation” does not restrict pump or blower operation.
DIP Switc
h
5 is use
d
to c
h
oose S
p
ecia
l
Am
p
era
g
e Ru
l
e 1 or 2.
When GFCI Test is Enabled, the Auto-Test can be set between 1 and 7
Reminder Periods can be set between 7 and 180 da
y
s. In addition, 365 da
y
s can be chosen.
Eac
h
remin
d
er can
b
e turne
d
OFF in
d
ivi
d
ua
ll
y.

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
17
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Configuration Options
Blue Indicates New Custom Configuration Default (Setup 1)
Download the User Interface and Programming Guide here:
http://service.balboa-instruments.com/zz40940_download.zip
TP400 Control Panel Features
Feature TP400T Options Increment
Button 1 Temperature See Panel Button Note N/A
Button 2 Jets 1 See Panel Button Note N/A
Button 3 Light 1 See Panel Button Note N/A
Button 4 Jets 2 See Panel Button Note N/A
Panel Buttons can be set with the following functions:
Unused – Up – Down – Temp – Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 – Jets 8 – Blower 1 – Blower 2 –
Mister 1 – Mister 2 – Mister 3 – Light 1 – Light 2 – Light 3 – Light 4 –
Fiber Optic – Option 1 – Option 2 – Option 3 – Option 4 – EitherLight – Flip – Chooser
LED B1 Heat ON See LED Indicators Note N/A
LED B2 Jets 1 See LED Indicators Note N/A
LED B3 Light 1 See LED Indicators Note N/A
LED B4 Jets 2 See LED Indicators Note N/A
LED Indicators can be set with the following functions:
Unused – Heat On – Filter Cycle On – Lock – Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 –
Jets 8 – Blower 1 – Blower 2 – Mister 1 – Mister 2 – Mister 3 – Light 1 – Light 2 – Light 3 – Light 4 –
Fiber Optic – Option 1 – Option 2 – Option 3 – Option 4 – EitherLight
TP400T
50260 
Includes Overlay PN 12511
TP400W
50259 
Includes Overlay PN 12510
TP400W requires the use of
an AX10A2 in Setups 1 – 4.
B1
B1
B2
B2
B3
B3
B4
B4
A4
A4
A3
A3
A2
A2
A1
A1
Opt
i
ons Increment
See
P
a
n
el
B
utto
n N
ote
N
/A
See
P
a
n
el
B
utto
n N
ote
N/
A
See Pane
l
Button Not
e
N
/A
See Pane
l
Button Not
e
N
/A
See LED In
d
icators Note N
/A
See
LED In
d
i
cato
r
s
N
ote
N
/A
LED Indicators can be set with the following functions
:
U
nuse
d
– Heat On – Fi
l
ter C
y
c
l
e On – Loc
k
– Jets 1 – Jets 2 – Jets 3
Jets 8 – Blower 1 – Blower 2 – Mister 1 – Mister 2 – Mister 3 – Light 1 – Light 2 – Light 3 – Light 4 –
Fiber Optic – Option 1 – Option 2 – Option 3 – Option 4 – EitherLight
– Jets 4 – Jets 5 – Jets 6 – Jets 7 –
t1
–
Light 2
–
Light 3
–
Light 4
–
Panel Buttons can be set with the followin
g
functions
:
U
nuse
d
– U
p
– Down – Tem
p
– Jets 1 – Jets 2 – Jets 3 – Jets 4 – J
e
Mister 1 – Mister 2 – Mister 3 – Light 1 – Light 2 – Light 3 – Light 4 –
Fiber O
p
tic – O
p
tion 1 – O
p
tion 2 – O
p
tion 3 – O
p
tion 4 – EitherLi
g
ht – Fli
p
– Choose
r
e
ts 5 – Jets 6 – Jets 7 – Jets 8 – B
l
ower 1 – B
l
ower 2 –
4
TP400W
Up
Down
Light 1
Jets 1
Heat ON
Unused
Light 1
Jets 1

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
18
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
TP600 Control Panel Features
Feature Default Options Increment
Button 1 Jets 1 See Panel Button Note N/A
Button 2 Jets 2 See Panel Button Note N/A
Button 3 Flip See Panel Button Note N/A
Button 4 Up See Panel Button Note N/A
Button 5 Light 1 See Panel Button Note N/A
Button 6 Down See Panel Button Note N/A
Panel Buttons can be set with the following functions:
Unused – Up – Down – Temp – Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 – Jets 8 – Blower 1 – Blower 2 –
Mister 1 – Mister 2 – Mister 3 – Light 1 – Light 2 – Light 3 – Light 4 –
Fiber Optic – Option 1 – Option 2 – Option 3 – Option 4 – EitherLight – Flip – Chooser
LED 1 Jets 1 See LED Indicators Note N/A
LED 2 Jets 2 See LED Indicators Note N/A
LED 3 Light 1 See LED Indicators Note N/A
LED 4 Heat ON See LED Indicators Note N/A
LED Indicators can be set with the following functions:
Unused – Heat On – Filter Cycle On – Lock – Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 –
Jets 8 – Blower 1 – Blower 2 – Mister 1 – Mister 2 – Mister 3 – Light 1 – Light 2 – Light 3 – Light 4 –
Fiber Optic – Option 1 – Option 2 – Option 3 – Option 4 – EitherLight
Configuration Options
JETS AUX LIGHT HE AT
TP600
55673-05 
Includes overlay PN12511
Blue Indicates New Custom Configuration Default (Setup 1)
14
1 2 3 4
2 5
36
Download the User Interface and Programming Guide here:
http://service.balboa-instruments.com/zz40940_download.zip
Opt
i
ons Increment
See
P
a
n
el
B
utto
n N
ote
N
/A
See
P
a
n
el
B
utto
n N
ote
N/
A
See Pane
l
Button Not
e
N
/A
See Pane
l
Button Not
e
N
/A
See
P
a
n
el
B
utto
n N
ote
N
/A
See
P
a
n
el
B
utto
n N
ote
N
/A
See LED In
d
icators Note N
/A
See
LED In
d
i
cato
r
s
N
ote
N
/A
See
LED In
d
i
cato
r
s
N
ote
N
/A
See LED In
d
icators Note N
/A
LED In
d
icators can
b
e set wit
h
t
h
e
f
o
ll
owing
f
unctions
:
U
nused – Heat On – Filter Cycle On – Lock – Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 –
J
ets 8 – Blower 1 – Blower 2 – Mister 1 – Mister 2 – Mister 3 – Li
g
ht 1 – Li
g
ht 2 – Li
g
ht 3 – Li
g
ht 4 –
Fi
b
er Optic – Option 1 – Option 2 – Option 3 – Option 4 – Eit
h
erLig
h
t
Pane
l
Buttons can
b
e set wit
h
t
h
e
f
o
ll
owing
f
unctions
:
U
nused – U
p
– Down – Tem
p
– Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 – Jets 8 – Blower 1 – Blower 2 –
Mister 1 – Mister 2 – Mister 3 – Li
gh
t 1 – Li
gh
t 2 – Li
gh
t 3 – Li
gh
t 4 –
Fi
b
er Optic – Option 1 – Option 2 – Option 3 – Option 4 – Eit
h
erLig
h
t – F
l
ip – C
h
oose
r

Template 40941_J 04-02-10 56125-01/56126-01_97_B 01-10-12
19
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
Auxilliary Panel Features
Feature Default Options Increment
Aux Button A1 Jets 1 See Aux Button Note N/A
Aux Button A2 Jets 2 See Aux Button Note N/A
Aux Button A3 Unused See Aux Button Note N/A
Aux Button A4 Light See Aux Button Note N/A
Aux Buttons can be set with the following functions:
Unused – Up – Down – Temp – Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 – Jets 8 – Blower 1 – Blower 2 –
Mister 1 – Mister 2 – Mister 3 – Light 1 – Light 2 – Light 3 – Light 4 –
Fiber Optic – Option 1 – Option 2 – Option 3 – Option 4 – EitherLight – Flip – Chooser
AX10 A1 No O/L 52803
AX10 A2 AUX O/L 55919 
AX10 A3 No O/L 52805
AX10 A4 No O/L 52806
AX20 A1A2 No O/L 52800
AX20 A1A3 No O/L 52801
AX20 A1A4 No O/L 52802
AX40 No O/L 52799
Configuration Options
Blue Indicates New Custom Configuration Default (Setup 1)
A1 A2, 3 or 4
A1 A2 A3 A4
O
p
tions Increment
S
ee Aux Button Not
e
N
/
A
See
A
u
x B
utto
n N
ote
N
/
A
See
A
u
x B
utto
n N
ote
N
/A
S
ee Aux Button Not
e
N
/
A
Aux Buttons can
b
e set wit
h
t
h
e
f
o
ll
owing
f
unctions:
U
nused – Up – Down – Temp – Jets 1 – Jets 2 – Jets 3 – Jets 4 – Jets 5 – Jets 6 – Jets 7 – Jets 8 – Blower 1 – Blower 2 –
Mister 1 – Mister 2 – Mister 3 – Li
g
ht 1 – Li
g
ht 2 – Li
g
ht 3 – Li
g
ht 4 –
Fiber Optic – Option 1 – Option 2 – Option 3 – Option 4 – EitherLight
– Flip – Chooser
t