Ballard Designs STAKED TWINKLING FRASIER FIR TREE 4FT User manual

PRODUCT NAME: STAKED TWINKLING FRASIER FIR TREE 4FT
ITEM NUMBER: HT041 4FT
DIMENSIONS OF ITEM ASSEMBLED: 48”H x 30”Diam.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 5/24/2022 Page 1 of 4
MADE IN CHINA
NOTE: Before use or reuse, inspect the Tree carefully to ensure there are no cut,
damaged, or frayed wire insulation or cords, exposed copper wire,
loose connections, or cracks in the light holders or enclosures.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.

Page 2 of 4
Ltr.
A
B
1
1
Qty. Hardware Included
************
************
************
************
************
************
************
************
************
************
Power Adaptor
Control Box
Tree stake (E)
Top Section (C)
Bottom Section (D)
Ltr.
C
D
1
1
E 1
Qty. Components
REQUIRED TOOLS:
-Two person assembly suggested.
Remove all parts, hardware and
protective packaging from carton
and carefully arrange on a clean,
level, padded surface.
Assemble in location for intended use.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 3 of 4
STEP 3: Start with the bottom most layers of branches closest to the pole and lift each tip up and
out in alternating directions. Repeat for each branch.
STEP 2: Insert tree stake on the ground and then connect with the tree body. Plug the power
adaptor to electrical outlet.
*
*
*
*
*
*
*
****
*
*
****
*
*
*
*
*
*
*
**
**
*
***
****
*
*
*
*
*
*
*
*
*
*
*
*
*
*
**
*
*
**
**
*
*
1. If entire Tree does not light, make sure the power cord is inserted in a working outlet.
2. Check the plug connections on the tree, control box and power adaptor.
TROUBLESHOOTING:
STEP 1: Attach the Top Section (C) to the Bottom Section (D). Plug the Top Section light strand into
the Bottom Section
************
************
************
************
************
T
op Section (C)
Bottom Section (D)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 4 of 4
1. If entire Tree does not light, make sure the power cord is inserted in a working outlet.
2. Check the plug connections on the tree, control box and power adaptor.
TROUBLESHOOTING:
Cleaning & Care:
When not in use, store in a cool, dry location protected from sunlight.
1.Power ON
2.Power OFF
SELECT
ON
OFF
DESCRIPTION
MODE
MODE
Power ON
Power OFF
Lights steady ON with timer
functions (6 hours ON, 18 hours OFF)
Lights random twinkle with timer
functions (6 hours ON, 18 hours OFF)
Press ON/OFF button once
OPERATION
Control box:
Press ON/OFF button twice
Press MODE button once
Press MODE button twice
SPECIFICATIONS:
LIGHT SOURCE: LED
ELECTRICIAL SPECIFICATIONS: 120V – 60HZ – 0.5A
UP LISTED ADAPTOR: 29V
UL LISTED: E338180
ON/OFF MODE
Function
4.Lights steady ON
with timer
3.Lights random twinkle
with timer
Customer Service: 800-367-2810
Online: www.ballarddesigns.com