Baroness LM56GA(GAF) User manual

Read this manual before using the machine.
Owner's Handling Manual
GREEN MOWER
LAWNMOWER
LM56GA SN14723andonwards
LM66TA SN10045andonwards

CONTENTS…………………………………………………………………………………… 1
WarningforSafety …………………………………………………………………………… 2
Greeting ……………………………………………………………………………………… 2
Safetyprecautions …………………………………………………………………………… 3
Partnames …………………………………………………………………………………… 5
FeaturesofLM56GA/LM66GA/LM66TA ………………………………………………… 6
Specifications ………………………………………………………………………………… 6
Handling ……………………………………………………………………………………… 6
1.Assemblyandadjustmentofmainunit ………………………………………………… 6
1-1Installingthehandle…………………………………………………………………… 6
1-2Installingthestand …………………………………………………………………… 7
1-3Confirmationoftheoperationofclutchleverandbrakelever …………………… 7
1-4Connectionofengineswitchcord ………………………………………………… 7
2.Inspectionbeforeuse ……………………………………………………………………… 8
2-1Greasing ……………………………………………………………………………… 8
2-2Inspectionofengineoil ……………………………………………………………… 8
2-3Inspectionofwire ……………………………………………………………………… 8
3.Fasteningofeachportion ………………………………………………………………… 8
4.Enginestartingsequence ………………………………………………………………… 8
4-1 Beforestartingengine …………………………………………… 8
4-2 Startingtheengine ………………………………………………… 8
4-3 Stoppingtheengine………………………………………………… 9
4-4 Fuelsupply ………………………………………………………… 9
4-5 Whenleavingthemachine ………………………………………… 9
5.Machineoperation ………………………………………………………………………… 9
5-1 Beforeoperation …………………………………………………… 9
5-2Mainclutchlever ……………………………………………………………………… 9
5-3Changelever ………………………………………………………………………… 9
5-4Groomerclutchlever …………………………………………………………………10
5-5Adjustmentofhandleheight …………………………………………………………10
5-6 Brakelever …………………………………………………………10
5-7Throttlelever …………………………………………………………………………10
5-8［IMPORTANT］Adjustmentofengineclutch ……………………………………10
1
CONTENTS
5-9Clutchcover ……………………………………………………………………………11
5-10Travellingwheel ……………………………………………………………………11
5-11［IMPORTANT］Adjustmentofmowingheight……………………………………11
5-12［IMPORTANT］Greasing …………………………………………………………11
5-13Settingthemowingheightgaugeandbladethickness …………………………12
6.Bladeengagement…………………………………………………………………………13
6-1［IMPORTANT］Lapping ……………………………………………………………13
6-2［IMPORTANT］Engagement ………………………………………………………13
6-3［IMPORTANT］Camadjustment ……………………………………………………13
6-4Cylindricalgrindingandinstallationofbladereelcylinder ………………………14
6-5［IMPORTANT］Installationofbladereelcylinder …………………………………14
6-6Attaching/detachingthesmallcover ………………………………………………14
6-7Attaching/detachingthebottombladebase ………………………………………15
6-8Machinenumberplateattachingposition …………………………………………15
6-9Specificationformaintenance ………………………………………………………15
6-10Positionofmowerduringmaintenance ……………………………………………15
7.Long-termstorage …………………………………………………………………………15
8. Precautionsforengineoperation ………………………………………16
9.MaintenanceSchedule ……………………………………………………………………16
LocationofLabels ……………………………………………………………………………17
Understandingthemachinesafetylabels …………………………………………………18
WARNING
CAUTION
DANGER
CAUTION
CAUTION
DANGER
WARNING
CAUTION

Precautions:
● Thenameofthemodelmaybedifferentwhenyoumakeaninquiryaboutyour
machine.Adviseusofthemachinenumberaswell.
● Thecontentsofthismanualaresubjecttochangewithoutnotice.
WarningforSafety
Warningmarksindicateimportantitemsforsafety.
Observethemstrictly.
WarningMarks
Negligenceofthewarningmaycausedeathorserious
injury.
Negligenceofthewarningmaycauseinjuryor
propertydamage.
ThankyouverymuchforpurchasingBARONESSGREENMOWER.
ThisOwner'sHandlingManual explainsthe methodof correcthandling, adjustment,
andmaintenanceofthemower.Thoroughlyreadthemanualbeforeoperation.Carefully
readtheengineoperationmanualbeforestartingtheengine.Mowersundergo
thoroughgoingtrialoperationandinspectionbeforeshipment.However,whetherornot
themowercanexhibittheexpectedperformancedependsonthehandlingmethod,
inspection/adjustmentbeforeandafteroperation,andtheproperness oflubrication.
Handlethe mowercorrectly forsafe andexcellent operationfor anextended periodof
time.
Greeting
Owner'sHandlingManual
CAUTION
Thewarningmarksattachedtothemachineindicateprecautions forsafety.Readthem
carefully.Understandwelltheoperatingproceduresandsafetyprecautionsbeforeusing
themachine.Themarksandexplanatorynotesshouldbekeptclean.Iftheyarelostor
damaged,attachnewmarks.Neverremovethewarningmarksattachedtothemachine.
Grease
Every10hours
Hotsurface
Burnonhand
SeetheHandling
Manual
Dangermark
Handcut
Fuel : Gasoline
Dangermark
Footcut
WARNING
CAUTION
CAUTION : Jointshaft
2
Engineswitchlever
10h
Negligenceofthewarningwillcausedeathorserious
injury.
DANGER

3
Thelawnmowerhasarotatingbladereelcylinder (sharpblade),andthesafetyof
operationissubjecttothe placeofuse,obstacles,lawnconditions,andmanyother
factors.Asamaker,wespecificallyrequesttheusertothoroughlyinspectandmaintain
themachine,makeeffortstobecomeskilfulinoperatingthemachine,andcorrectlyand
safelyusethemachineinordertoavoidinjuryonyourselfandothers.
1)Clothesforsafety
● Wearclothes thatwill preventyou from beingcaught inthemachine,andwear
safetygear,goggles,shoes,helmet,andgloves.
Itisstronglyadvisedthattheoperatorsofthismachinewearbothgogglesandear
defendersfortheirprotection.
2)Emergencyreliefmeasures
● Understandthemethodofstoppingtheengineinanemergency.
Safetyprecautions
CAUTION
3)Donotoperatethemachineinsuchcases.
● Donot operatethe machinewhen youaretired.If youget tiredduring machine
operation,stoptheworkandtakearest.
● Donotusethemachinewhenyouaresick,drunk,orundertheinfluenceof
medicine.Thevisualsensation,nimbleness,orjudgmentwillbeadverselyaffected.
● Ifyouareunaccustomedtothemachineoperation,thoroughly understandthe
handlingmethodandsafetyprecautionsbeforeuse.Donotallowchildrentooperate
themachine.
4)Whenlendingthemachinetootherpeople
Ifyoulendthemachinetoapersonwhohasnoknowledgeaboutthesafetyprecautions
orhandling proceduredescribed intheoperation manual,an unexpectedaccident may
result.Thoroughlyexplainthehandlingmethodandhandovertheoperationmanualto
thepersonwhowillusethemachine,havinghimorhercarefullyreadtheoperation
manualbeforeuse.
5)Prohibitionofoperationorworkatnight
Donotoperatethemachineatnightorwhentheviewisunclearbecauseofbadweather.
6)Safetyinspectionbeforework
● Checkthatallcoversareinpositionandthatnoportionisbroken.
● Checkthatboltsandnutsarenotloose.Iftheyareloose,tighten
them.
● Checkthattheoperation ofthebrake,levers,andtiresisnormal.
WARNING
DANGER
CAUTION
CAUTION
WARNING

4
7)Precautionstotakeduringoperation
● Checkthat thereis noperson oranyobjectthatmay bebroken
aroundthemachineduringoperation.
● Checkthatthereisnoplayerinthevicinity,otherwiseaflyinggolf
ballmayhitagainstyou.
● Exerciseadequate careso thatyou willnotgetinjuredby flying
objectsortheblade.
●
Exercisespecialcarewhenworkingonaslopeorundulatingground.
Theinclinationofthemachineshouldnotexceed25degrees.
● Donotoperatethemachineinplaceswherethere isariskof
topplingorslipping.
● Donot touchrotating partsduringoperation, otherwiseyou may
haveyourfingersorhandsinjured.
● Operatethemachineataspeedthatwillallowthemachinetostop
immediatelyinanemergency.Donotstartthemachineoroperate
thehandlesuddenly.Besuretomovethemachineataslowspeed
especiallywhendescendingaslope.
● Donotmovethethrottleleverabruptlytoincreasethespeed,
otherwisethefrontofthemachinemayjumpup.
● Whenyounoticeabnormalvibration,unusualsound,orother
abnormalityinthemachine,stoptheengineimmediatelyand
investigatethecause.Completelyrepairthemachinebeforereuse.
● Whenleaving themachine,stop themachine onthelevelground
andthenstoptheengine.
DANGER
8)Precautionsastoinspection
● Placethemachineonthelevelgroundforinspectionandrepair.
Checkthatallpartsareatrest.
● Cloggingofthecoolingairintakeoftheengine,airintakeoftheair
cleaner,muffler,andexhaustpipewithmowngrassorother
foreignsubstances maycausefire duetoengine malfunctionor
overheating.Stoptheworkimmediately,andremovetheclogging
substanceaftertheoverheatedsectionhascooled.
● Keepthewarningmarksandexplanationscleanatalltimes.
Replacethem withnewones immediatelywhenthey arelostor
damaged.
● Donotremodelthemachine.
● Useparts,oil,andgreasespecifiedbyourcompanywhenchanging
them.
● Remodelingor operationof themachinewithsomeparts thatare
notspecifiedbyourcompanymaycausedamagetothemachineor
injury.
9)Movingonapublicroad
● Runningthe machineon apublic roadwhileyouareriding ona
sulkyisprohibited bythelaw. Walkandmovethemachineon a
publicroad.
10)Storage
● Waituntiltheenginecoolswhencoveringthemachinewitha
sheet,etc.
● Removegasolinewhenthemachinewillnotbeoperatedformore
thansixmonths.
CAUTION
WARNING
CAUTION
CAUTION
DANGER
DANGER

Partnames
5
Engine
Engineclutchcover
Engineswitchcord
Brakelever
Throttlelever
Handle
Bladereel
Drumwheel
Travellingwheel
WheelShaft
Grasscatcher
Frontroller
Frontgroomer
Engineswitch
Mainclutchlever
Groomerclutchlever

FeaturesofLM56GA・66GA・66TA
Specifications
● Thelightestgreenmowerofallmodelsofthisclass
● Theweightbalanceandundulationfollowingperformancehavebeenimprovedfor
bettergreenmowing.
● Thenewly-designedhandleimprovestheoperability,lesseningtheoperator'sfatigue.
● Thestructureoftheclutchhasbeenchangedforsmoothstarting.
●LM56GAF・66GAFareequippedwithFrontGroomer.
● Thefrontgroomerisprovidedtopermitnormalandreverserotation.
(Providedwithagroomer.)
6
Handling
1.Assemblyandadjustmentofmainunit
Installingthehandle
1)Put thehandle pinontheleftframe intothe holeat theleft-side loweredgeof the
handle.
2)Whilepressingtheright-sideloweredgeofthehandleinward,putthehandlepinofthe
rightframeintothehole.
3)Securetheloweredge(slottedsection)oftherightandlefthandlestotheframefrom
thebackwiththebolt,conicalspringwasher,andwasher.
Model
Length(withgrasscatcher)
Width(withouttravellingwheel)
Height(handle)
Weight
Mowing
section
Mainunit(withoutcatcherandwheel)
Grasscatcher
Travellingwheels(2pcs)
Mowingwidth
Reeldiameter
Numberofreelblades
Mowingheight
Engine
Speed(Km/h)
LM56Series
LM66Series
Frontgroomer Dethatchingreel Dethatchingbrush
Workingwidth
（cm）
49
57
（cm）
6
6
Workingwidth
（cm）
50
60
39
46
Workingwidth
（cm）
51
60
Numberof
blades Numberof blades Turning diameter
78
92
1-1
Left-sideloweredgeofhandle
Conicalspringwasher
Washer
Bolt
Handlepin
(Leftframe)
Handlepin(Rightframe)
Right-sideloweredgeofhandle
※
Whilepressingthe
right-sideloweredge
ofthehandleinward,
putthehandlepin
LM56GA（GAF）LM66GA（GAF）
150cm
94.2cm 103.2cm
81kg（85kg）
3.3kg
87kg（91kg） 86kg
3.6kg
103cm
6.9kg
φ12.8cm
9or11blades
3.0〜29mm（3.0〜27mm）
7blades
7.0〜29mm
RobinEX13D3.2kw（4.3ps）/4000rpm
4.8km/h（3000rpm）
4.4km/h
（3000rpm）
55.6cm 64.6cm
LM66TA

7
Installingthestand
1)Temporarilysecuretheleftsideofthestandtotheframewiththebolt,washer
(inside),andnut(outside).
2)Putthespringontheprojectionoftheframeandtheprojectionattherightedgeofthe
stand.
3)While pullingthe rightsideofthestand backward,make alignmentwith theholein
theframe,andsecurethestandwiththebolt,washer(inside),andnut(outside).
4)Tighten thebolt, washer,and nutat theleftside ofthe standthat weretemporarily
secured.
1-2 Confirmationoftheoperationofclutchleverandbrakelever
Checkthattheclutchandbrakeoperatecompletely.
Whenadjustmentisnecessary,makeadjustmentaccordingto"5-8.［Important］
Adjustmentofengineclutchsection."
Connectionofengineswitchcord
Whenassemblingthehandle,checktheconnectionoftheengineswitchcord.Thereare
twoconnections-plugandcrimpterminal.
1)Theplugisconnectedtotheplugthatisconnectedtotheengine.
2)Thecrimpterminalissecuredtotheenginecrankcasewithahexagonbolt.Whenthe
connectionoftheengineswitchcordisincomplete,theenginewillnotstopevenifthe
engineswitchisoperated.Checkthatthecordiscorrectlyconnected.
1-3
1-4
WARNING
Putthespringontheprojection.
Temporarilysecurethe
leftsideofthestand.
Tightenthe
leftsideof
thestand.
Whilepullingtherightside
ofthestandbackward,
makealignmentwith the
holeandsecurethestand.
Plug
Crimpterminal

8
2.Inspectionbeforeuse
Greasing
Thetransmissionand intermediatetransmissiongearsareequipped
withneedlebearings.Grease themevery10hours.Shortage ofgrease
willcausedamagetotheneedlebearings.
Inspectionofengineoil
Replenishtheenginewithengineoil.(Acorrectlevelwillbeshownwhentheengineis
placedhorizontally.) Change engineoil 8hours afterthe initial operation,and every50
hoursfromthesecondtimeonward.Oil:SAE30.
Inspectionofwire
Checkthattheclutchwireandbrakewirearenormal.
3.Fasteningofeachportion
Manypartsarefastenedbybolts.Boltsandnutsmaybeloosenedsometimeafterinitial
operation.Fastenthemtothespecifiedtorque.
2-1
2-2
2-3
M6
M8
M10
M16
Normalbolt
8（80）
18（180）
36（360）
1.5-pitchleft-handthread:36（360）
Heattreatedbolt
36（360）
72（720）
4.Enginestartingsequence
Beforestartingengine
Carefullyreadthe gasolineengineoperationmanual beforestartingtheengine. The
handlecoverisequippedwithanengineswitch.Checkthe"ON/OFF"positions.Setthe
engineswitchleverintheONposition,setallmovingpartsintheneutralposition.Check
forsafety -covers arein positionandnotdamagedand thereis noperson aroundthe
machine-beforestartingtheengine.Donotstarttheengineindoorswithoutan
appropriateventilator.
Startingtheengine
1)Donotgripthemainclutchlever.
2)Setthethrottleleverinthehigh-speed position.
3)SettheengineswitchintheONposition.
4)Setthestrainerleverintheopenposition.
5)Pullthechokeleverandpulltherecoilstarter,andtheenginewillstart.
6)Returnthechokelever.
4-1
AppropriatefasteningtorqueN.m(kgf-cm)
WARNING
10h
4-2 CAUTION
High-speed
OFF ON
Open
Main
Clutchlever

5.Machineoperation
Beforeoperation
● Checkthateachportion-especiallythebrakeandclutch-operates
satisfactorilybeforestartingmachineoperation.
● Makesurethatthemachinecanbestoppedimmediatelyatanytime.
● Exercise care so that you and people around the machine will not be injured.
Mainclutchlever
Theclutchleverisontheleftsideofthehandle.
Avoidquickoperation.Carefullyandslowlyoperatethe
machine.
※ Gripthelever,andthetravellingdriveisturned"ON"and
themachinebeginstomoveforward.
Changelever
Thechangeleverisatthetopoftheleftframe.
Therearethreechangeoverpositions.Whentheleverisinthe"ReelON"position,the
drumandcutteroperate,enteringthemowingmode.
Whenthelever isinthe"Travel ON"position,onlythe drumoperates,enteringthe
travelingmode.
Whentheleverisonthe"TravelOFF"position,bothdrumandcutterstop,enteringthe
travelingmodewiththeenginestopped.
Stoppingtheengine
※Rememberthemethodforstoppingtheengineinanemergency.
1)Donotgripthemainclutchlever.
2)Setthethrottleleverinthelow-speed position.
3)Setthestrainerleverinthecloseposition.
4)SettheengineswitchintheOFFposition.
5)SettheengineleverintheOFFpositionimmediatelyinanemergency.
Fuelsupply
● Keepflameetc.awayfromtheenginewhensupplyingfuel.Stop
theengineoutdoorsandallowittocoolbeforesupplyingfuel.
● Keepthe machine cleanat alltimesto preventdeposition of
dust,grease,oroil.
Whenleavingthemachine
● Parkthemachineonaflatplace.
● Checkthattheenginehasstoppedandtheengineswitchleveris"OFF."
● Donotparkthemachineonaslope.
9
4-3
DANGER
CAUTION
5-1 DANGER
5-2
OFF
ON
Mainclutchlever
4-4
4-5 CAUTION
Low-speed
Close
OFF ON
Main
Clutchlever
Drumoperation
Bladereelcylinderoperation
Drumoperation
Bladereelcylinderstop
Drumcutterstop
Bladereelcylinderstop
TravelON
ReelON
TravelOFF
（
（
（
Changelever
5-3

Groomerclutchlever
Theleverisatthetopofthegroomergearcaseontheoutsideoftherightframe.
Thereare threechangeoverpositions -"Normal rotation"(in thesame directionasthe
rotatingdirection oftheblade reelcylinder), "Rotationstop,"and "Reverserotation" (in
thedirectionoppositetothedirectionofrotationofthebladereelcylinder).Changethe
positionsaccordingtothetypeofwork.
Adjustmentofhandleheight
Movethesecuringboltupanddownintheslotofthehandleguide,whichissecuringthe
handletotheframe,inordertoadjusttheheightofthehandleaccordingtotheoperator's
workingposition.
Brakelever
Theleverisintheright-sidegripsectionofthehandle.Gripthelever,andtheinternal
expandingbrakesetinthesecondshaftsectionwilloperate.
Thestrengthcanbeadjustedbythescrew.
10
5-4
Normalrotation
Reverserotation
Rotationstop
Throttlelever
Thethrottleleverisontheleftsideofthehandle.Thelevercontrols
theenginespeed.Thespeedofrotationis1,400-3,400rpm.
Operateatabout3,000rpm.
［IMPORTANT］Adjustmentofengineclutch
《Whenreinstallingtheengine》
Adjusttheclearancebetweentheengineclutchandclutchfacingsothatitwillbeapprox.
0.5to1mmwhenthetravellingclutchisengaged.Foradjustment,loosenthefourbolts
thataresecuring theengine,andinsertathicknessgauge (attached)intothefrontand
rear.Makeadjustmentsothatthegapwillbeparallel,andthenfastenthebolts.
《Whenadjustingtheclutchwire》
Makeadjustment sothat theoperation distanceof theclutch platebetween theclutch
engagmentanddisengagementwillbe0.8-1mm.
5-5
5-6 WARNING
5-7
Engineclutch Clutchfacing
Clutchwireadjustingnut
Clearance
0.5〜1.0mm
1.0〜2.0mm
Operationdistance
5-8

Clutchcover
Theclutchcover isontheleftsideof
theengine, covering theengine clutch.
Itissecured byturningthe fastenbolt
clockwise(by4-5turns).
Travellingwheel
Thetravellingwheelisusedtomovethemachinefromgreentogreen.Setthestandup
right,pullthetireholdingthelever,andthewheelwillcomeoff.
※tireairpressure120kPa（1.2kg/cm2）
［IMPORTANT］ Adjustmentofmowingheight
Movethefrontrollerupordown,andthemowingheightcanbeadjustedtoamaximum
of27mm.Useanoptionalbottombladewhen3m/mmowingheightisdesired.
5-9
clutchcover
fasten
fastenbolt
open
［IMPORTANT］ Greasing
Periodicallyfilluprespectivegreasenipples.
Exercisespecialcarewhengreasingthesectionswhereneedlebearingsareused.
(Intermediateshaftoftherightandleftgearsandtheintermediateshaftofthegroomer)
Periodicallyfill upthe greasenippleswith approx.1 gof grease(EXCELITE EPNo.2)
(oneortwotimeswithacompactmanualgreasepump).
5-10
5-11
Drum
Bottomblade
Frontgroomer
Bladereedcylinder
Frontroller
mowing
height
Every10hr Every50hr
Leftframeintermediateshaft(forReel)
Right&leftframeintermediateshaft(forDrum)
Differentialgearparts
Verticalgearcaseintermediateshaft
Leftgearcover
Reelbearing
Frontroller
Verticalgearcase
5-12
11
Right-sidemainunit Left-sidemainunit
Every10hr
Every50hr

Settingthemowingheightgaugeandbladethickness
1)Set themowing heightgaugeatthedesired height. Theminimum mowingheight
withrespecttoeachbottombladethicknessisshownbelow.
※ Theminimummowingheightistheheightontheaverageconditiongreen.Lawnmay
beshaved whenthe undulationof thegreen issubstantial. Set themowing height
higherinthatcase.
2)Adjustthefrontgloomeraccordingtotheconditionofthegreenbeforeuse.
※ Ifthegroomerbladesaresetdeeperthanthegroundsurface,theshaftmaybend.
※ Thefrontgroomer,whenitisputtoolow,willapplyanexcessiveloadtotheengine
andtransmissionsection,causingmalfunctionorfailure.
3)Whenusingthe groomingbrush,adjusttheheight sothatitwillbe equaltothe
mowingheight.
※ Thebrushwillbeworneasilywhentheheightistoolow.
4)［IMPORTANT］ Adjustmentoffrontrollerheight
Bringthemowingheightgaugeintocontactwiththefrontrolleranddrum(asshown
below),andadjusttheheightofthebottomblade.
a.Loosenthetallnutoftherollerbracket,andmovethefrontrollerupordownwith
rolleradjuster.
b.Positionthefrontrollerwiththemowingheightgauge.
c.Makeadjustmentatbothedges.
d.Tightenthetallnut,andsecuretherollerbracket.
12
5-13
Frontroller
Frontgroomer
Bladereelcylinder
Drum
Smallscrewfor
Dethatching
Smallscrewfor
mowingheight
Bottomblade
Mowingheightgauge
Bladethickness Bladethickness
Standardblade Tippedblade
1.5
2
2.5
3
5
1.5
2
2.5
3
5
3.0
3.5
4.0
4.5
7.0
3.0
3.5
4.0
4.5
7.0
LM56GA
LM66GA
Standard
blade
Tipped
blade
Standard
blade
Tipped
blade
Typeof
blade
Blade
thickness
(mm)
Min.mowing
height(mm) CodeNo. PartName Note
K2511000270
K2511000280
K2511000050
K2510000060
K2510000160
K2511000310
K2511000300
K2511000200
K2510000150
K2510000170
1.5 bottomblade55G
2 bottomblade55G
2.5 bottomblade55G
3 bottomblade62.5-559
5 bottomblade62.5-559
1.5 bottomblade65G
2 bottomblade65G
2.5 bottomblade65G
3 bottomblade
62.5-648.4
5 bottomblade 62.5-648.4
Option
standard
standard
Option
Option

13
6.Bladeengagement
Checkthattheengineisatrestbeforemakingadjustment.
Grindandadjustthebladereelcylinderandbottombladeentirelysothata
newspaperwillbecutsharply.
［IMPORTANT］ Lapping
Conductlappingaftermowingoperation(beforeadjustingtheengagement).
1)Checktheentireportionofthebladereelcylindertocheckwhichportionisdull.(Ifa
newspapercannotbecutinanyportion,putintwosheetsofpapertocarefullycheck
whichportionisdull.)
2)Connectthelappingmachine(RM20B)orlappingbolt(option)tothelappingshaftof
themower.
3)Rotate thebladereel cylinderin thedirection oppositeto the mowingdirection, and
applyabrasive witha brushonlyto theportion wherea newspaperwas sharplycut.
Theportion wherea newspaperwas notcut isworn away.Do notapply abrasiveto
suchportions.
※Therightside(whenviewedfromthefrontofthebladereelcylinder)oftheblade
reelcylinderwillbewornaway3-4timesearlierthantheleftside.Whenapplying
abrasivetothebladereelcylinder,besuretomovethebrushfromlefttoright.(See
rightsketch)When theabrasive isamixture ofpowder (#200〜#400)and oil,mix
themattherateof1:3to4.Thegelcompound(option)canbeusedasitis.
4)Keeprotatingthebladereelcylinder,andstoprotationwhenthecontactsound
disappears.Putinanewspaperagaintocheckthebladereelcylinderentirelyforthe
sharpnessofeachportion.
5)Repeatoperations(3)and(4).Whenthebladereelcylinderandbottombladearein
contactwitheachotheruniformly,applyabrasivetothebladereelcylinderentirelyfor
finallapping.
6)Afterlapping,removetheabrasivewithsteam,etc.
Bothbladereelcylinderandbottombladeareedged.Handlethem
carefully.
Becarefulofthefingers,whichturnthebladereelcylinder,when
cuttinga newspapertocheck sharpness. Uniformlylap theright and
leftsidesofthebottombladeincontactwiththebladereelcylinder,and
thelifeofthebladewillbemaximized.
6-1
［IMPORTANT］Engagement
1)Lightlyengagethebladereelcylinderandbottombladeuniformlyonbothsides.
2)Uniformlyadjustthebottombladeontherightandleftsides.
Turnthebladeadjustingnutclockwiseforslightengagement,andturnit
counterclockwiseforfirmengagement.
3)Lightlyengagebothsidestotheextentthatanewspaperwillbecutsharply.
Whenthe bladereel cylinderis wornandthespringpressure decreases,adjust the
springpressureby thespringadjustingscrewand14nut. (Makeadjustmentso that
thespringwillbe50mmlong.)
［IMPORTANT］ Camadjustment
Turnthecambushonbothsidesofthebottomblade,andthebladewillberaisedand
loweredwithinamaximumrangeof0.3mm.Theabovemethodisusedwhentheedges
ofthebladereelcylinderandbottombladearenotinparallel.
1)When thereis agapbetween theblade reelcylinderandtheleft frameside ofthe
bottombladeloosenthelocknut,andturntheleftcambushclockwiseasmuchasthe
gap.Turn itclockwiseby 30°toraise thebottomblade by0.1 mm.Afteradjustment,
firmlyfastenthelocknut.
2)Whenthereisagapontherightframeside,loosenthelocknut,andturntherightcam
bushcounterclockwiseasmuchasthegap.
6-2
6-3
CAUTION
Movethebrush
fromlefttoright
Springlength
50mm
Bladeadjustingnut

14
Cylindricalgrindingandinstallationofbladereelcylinder
Cylindricallygrindthebladereelcylinderwhenitiswornawayandhasbecomeconical.
(Askthedealeryoupurchasedthemachinefromforcylindricalgrinding.)
［IMPORTANT］ Installationofbladereelcylinder
6-4
6-5
Attaching/detachingthesmallcover
Removethelappingboltand thegearretainercollarinthisorder,andthenremovethe
leftsmallcover.
Attachtheleftsmallcover,andthenattachthegearretainercollarandlappingboltinthis
order.(Attachtheleftsmallcoversothatthereelcuttershaftwillbeatthecenterofthe
oilsealoftheleftsmallcover.)
6-6
reelgearsecuringnut
20toothreelgear
NonGroomer
2SPCCwasher1635
16Lefthandthreadnut3P1.5
Leftsmallcover
Lappingbolt
Gearretainercollar
Torguewrench
GroomerModel
1)Replacethebearingsandreelshaftsealsonbothsidesofthebladereelcylinder.Use
thebearing30204JRP6thathasthesmallesterror.
2)Sufficientlyapplygrease(EXCELITEEPNO2)tothebearingandseal.(Applygrease
tothebearingwhileturningtheroller.)
3)Methodtofastennutafterinstallingthebladereelcylinder
［IMPORTANT］Tightenthenutuntilthelengthofthespringreaches11.5mm,andlock
thenut.Acertainpreloadwillbeappliedbythespringpressure.Therotationaltorqueof
theblade reelcylinder shouldbe0.8〜1.0N・m(8〜10kgf・cm). If itis not,check the
bearingandseal.
0.3
Centerofcambush
Camadjustment
Centerofcutterpin
Thebottombladerises
Thebottombladelowers
10diskspringH

Specificationformaintenance
Positionofmowerduringmaintenance
Ifthe mowerhandle isleftleaned onthe groundforalongtime duringmaintenance,
engineoilmayentertheenginecombustionchamberandcausetheenginetorun
improperly.
Becarefulnottokeepthispositionlong.
7.Long-termstorage
1)Fortheengine,refertotheengineoperationmanual.
2)Cylindricallygrindthebladereelcylindereverysixmonths.
3)Replacethebearing(30204JRP6)andsealonbothsidesofthebladereelcylinder
everyseason.(Replacethemeveniftheyhavenotbeenusedformanyhours.)
4)Cleanthemachine,andapplygreaseoroiltorespectiveslidingsections.
15
Machinenumberplateattachingposition
Thetypeandserialnumberaremarkedonthemachinenumberplate.
Itisattachedtotheupperportionontheleftsideofthefrontframestay.
6-8
6-9
6-10
Qtyofengineoil
Plug
Capacityofgasolinetank
Tireairpressure
Enginespeed
0.6dm3（0.6L）
NGKBR4HS
2.5dm3（2.5L）
120kpa（1.2kg/cm2）
1400〜3400rpm
Machinenumberplate
Attaching/detachingthebottombladebase
Removethebottombladebasearm,andthenremovethebottombladebase.
Attachthebottombladebase,andthenattachthebottombladebasearm.
6-7
Bottombladebasearm Bottombladebasearm
Loosen.
Tighten.
Bottombladebase
Loosen.
Tighten.
Loosen.
Tighten.

9)Whenthemachineistobestoredforalongtimeexceeding5
months,removegasolinefromtheengine.
10)Enginemaintenanceschedule
Tokeep theenginein satisfactorystatusat alltimes,be sureto
conductmaintenanceandinspectionaccordingtothefollowing
table:
9.MaintenanceSchedule
8. Precautionsforengineoperation
Fortheengine,refertotheengineoperationmanual.
1)Usegasolineforautomobilesasthefueloftheengine.
2)Completelychangeengineoilwhenthemachinehasbeenusedfor
eighthoursaftertheinitial operation,becausethemachineisused
undertoughconditionswithvibrationanddust,andchangeoilevery
50hoursafterthat.Thequantityofengineoilis0.6dm3(0.6L).Use
SAE30.
3)Alwayscoverthesuctionportoftheaircleanerwithacleanercover
bagduringoperation.Besuretocleantheaircleanerelement
beforeusingthemachine.
4)Fireisstrictlyprohibitedduringfuelsupply.Becarefulofalit
cigarette.Replenishthefueltankoutdoorsafterthestoppedengine
hasbeencooled.Wipeoffthespiltfuelcompletely.
5)Donotstarttheengineinabuildingwithoutaproperventilator.
6)Themufflerandtheareaaroundtheexhaustportofthemufflerwill
becomehot.Do notbringgasoline, matches,drygrass,orother
inflammablesnearhotportions.
7)Inspectionbeforeoperation
Checkthe jointoffuel pipe,etc. forloosenessordamage.Check
boltsandnutsinrespectivesectionsforlooseness.
8)Wearappropriateclothes.Anapron,towelonthebelt,longstring,
etc.willcauseyoutobecaughtinrotatingparts.
DANGER
CAUTION
CAUTION
CAUTION
CAUTION
Engine
Maintenance
Cleaningofeachpart/inspectionoftightening
Inspectionandadditionoffuel
Inspectionandcleaningofaircleaner
Inspectionandadditionofengineoil
Engineoilchange
Mainunit
Maintenance
Inspectionandcleaningofrecoilstarterdustproofingnet
Cleaningofeachpart/inspectionoftightening
Inspectionandadjustmentofbladeengagement
Inspectionandadjustmentofmowingheight
Greasingandoiling
Removalofmowngrassanddust
Beforeuse
○
○
○
○
○
○
○
○
○
Every8hr
Every8hr
Every10hr
Every10hr
○
Every50hr
○
Every50hr
○
16
onlyafterthe
initialoperation

17
LocationofLabelsforLM56GAandLM66TA
1
2
3
4
5
6
7
8
9
10
11
12
CodeNo. PartName Qty
/
Unit
CodeNo. PartName
ClutchMark
EngineoilWarningMark
NoiseWarningMark
LWA98Mark
ClutchMark(Large)
"Handlewithcare"label
"CuttingWarning"label
GroomerModeSelector
GreaseUp10hMark
BRAKEMark
WarningMark
Ｋ４２０３００１０４０
Ｋ４２０５００１３００
Ｋ４２０５００１３３０
Ｋ４２０９０００８８０
Ｋ４２０３００１１１０
Ｋ４２０５００１５９０
Ｋ４２０５００１６００
Ｋ４２０３００１１２０
Ｋ４２０９０００３７０
Ｋ４２０３０００９７０
Ｒ０７３−２００５１−８１
1
1
1
1
1
1
1
1
2
1
1
4
35
Right-sideofthemainunit
Rearofthemainunit
12

18
①Useonlyunleadedgasoline.
②Readtheowner'smanual.
③keepasafedistancefromthe
machine.
④Donotopenorremovesafety
shields while engine is
running.
⑤Stoptheengineandwaitfor
movingpartstostop.
⑥Itisstronglyadvisedthatthe
operatorsofthismachinewearear
defendersfortheirprotection.
⑦Stayclearofthehotsurface.
⑧Exhaustgasispoisonous.
Donotoperateinanunventilated
area.
⑨Stoptheenginebeforerefueling.
⑩Fire,openflameandsmoking
prohibited.
Understandingthemachinesafetylabels
①
②
③
④
⑤
⑥
⑦⑧②
⑨⑩ R073-20051-81
K4205001600
K4205001330
K4205001590