Barranca Diamond BD10 Manual

BD10 Power Feed Trim Saw
Owner’s Manual and Operating Instructions
Caution: Read all safety and operating
instructions before using this equipment.
This manual MUST accompany the
equipment at all times.
Revision 113
Manual Part # 169351
10.2018
Barranca Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.barrancadiamond.com

24
2
4
5
6
7
9
10
11
13
12
14
15
16
17
18
19
23
25
26
27
28
29
30
31
32
33
34
35
36
37
40
41
42
43
44
45
46
47
49
50
51
52
53
54
55
56
60
10
11
11
11
19
19
19
42
20
22
38
48
21
24
61
1
8
62
BD10 EXPLODED VIEW
BD-10 P/N 168787

25
Item Part Description Part# Quantity
1 Nut, Hex, 5/16 - 18 10119 6 4
2 Pulley, 2" x 5/8" bore 134676 1
3 Wrench, Tile Saw Nut 15/16 134684 1
4 Flange, Outer, 2 - 3/8 135830 2
5 Bearing, Ball, 17 x 40 x 12mm 137711 2
6 Screw, Soc HD Cap, 1/4 - 20 x 1 151049 4
7 Screw, Pan HD #10 - 32 x 1/2 151052 9
8 Washer, Lock, Split, 5/16 151747 4
9 Washer, Flat, SAE, 5/16 151754 8
10 Nut, Hex, 1/4 - 20 151893 9
11 Washer, 1/4 SAE Flat 151915 14
12 Belt, AX26 152365 1
13 Screw, Hex HD, 1/4 - 20 x 3/4 152370 4
14 Washer, 1/4 Split Lock 152591 5
15 Plug, Rbbr Drain W/O Hole 153439-NL 1
16 Washer, #10 Split Lock 153684 8
17 Blade 10" x 5/8" 153696 1
18 Screw, Hex, HD, 5/16 - 18 x 1 - 1/4 153950 4
19 Washer, #10 SAE Flat 154369 15
20 Label, Warning, Read Manual 154398 1
21 Label, Information on Service 155038 1
22 Label, Caution, Guards in Place 155587 1
23 Bushing, Blade 1-5.8 x .050 155632 1
24 Label, Notice, Motor Problems 155672 1
25 Nut, Hex 10 - 32 156269 3
26 Screw, 10 - 32 x 1 Hex Head Cap 156270 2
27 Tag, Serial Number, Blank 157500-RW 1
28 Assy, Oil Drain, 1/2NPT 157577-06 1
29 Screw, Hex HD, Tap, 5/16-18x2 157938 1
30 Nut, Hex Jam 5/8 - 11UNC LH 158577 1
31 Guard, Splash 161023 1
32 Guard, Blade PF-10 161068 1
33 Pulley, 1A20 x 1/2 Bore 161070 1
34 Spacer, Nylon 3/8 LG. x 1/2 OD 161076 2
35 MTR, .33HP 115/230V 60Hz 1 PH 161672 1
36 Nut, Wing 3/8 - 16 161715 1
37 Screw, Thumb, 1/4 - 20 x 2.0 161904 1
38 Label, Warning, Silica, Prop 65 164202 1
39 Wrench, 3/16 Hex L-Key 16 5118 1
BD10 PARTS LIST
BD-10 P/N 168787

26
Item Part Description Part# Quantity
40 Hex Cap Screw 1/4 - 20 x 5 - 1/2" 166262 1
41 Cord, Power, 14/3 115V 167180 1
42 Screw, Pan Head Self Sealing 10-32 x 3/4 167781 4
43 Tank, Comp 168789 1
44 Table, Comp 168791 1
45 Assembly, Vise 168792 1
46 Assy, Gear Motor, BD-10 168795 1
47 Guard, Belt, Comp 168804 1
48 Hood, Plastic, BD-10 168817 1
49 Arbor Housing Casting Comp 168825 1
50 Shaft, Arbor 168826 1
51 Hinge, Comp 168835 1
52 Gasket, Arbor 168892 1
53 Screw, Pan HD 10 - 32 x 2.0" 168893 1
54 Table, Rod 168909 1
55 Washer, Slotted 3/8" 16 8911 1
56 Base, Comp 168949 1
57 Owner's Manual, BD-10 169351 1
58 Grease, Super Lube, 3oz Tube 169709 1
59 Assy, Carton, BD-10 169718 1
60 Weldment, Motor Mount 169726 1
61 Label, QR Code BD Manuals 171239 1
62 Strip, Neoprene Foam, 1/2 x 1/4, 48" 172553 1
BD10 PARTS LIST
BD-10 P/N 168787

27
Item Part Description Part# Quantity
1 Screw, rnd hd, #8-32x1/2 152517 6
2 Screw, Hex HD FL 10-24x 5/16 159597 1
3 Switch, Feed Toggle, 15A, DPDT 161052 1
4 Screw, 4-40 x 3/4 socket head cap 164206 2
5 Housing Casting Comp 168797 1
6 Cover, Housing Comp 168802 1
7 Gear Motor 5 RPM 168832 1
8 Switch, Micro Snap Action 168833 1
9 Label, ON/OFF 169352 1
BD10 EXPLODED VIEW & PARTS LIST
1
2
4
5
6
7 8
1
3
9
BD-10 Assy. Gear Motor P/N 168795

28
BD10 EXPLODED VIEW
BD-10 Assy. Vise P/N 168792

29
Item Part Description Part# Quantity
1 Nut, Hex, 3/8 - 16 10118 8 2
2 Washer, Flat, SAE, 3/8 150923 3
3 Screw, 10 -32 x 1/2 Pan Head Phillips Machine 151052 2
4 Washer, #10 SAE Flat 154369 1
5 Screw, Pan HD, 1/4 - 20 x 1/4 157523 1
6 Screw, Soc HD Set 1/4 - 20 x 1/4 157528 1
7 Screw, Set Cup, #10 - 32 x 3/16" S.S. 161038 2
8 Collar, Shaft 1/4 x 1/2 161066 2
9 Nut, Wing 3/8 - 16 161715 2
10 Knob, 1/4 - 20 x 2 Round 165163 1
11 Screw, Pan Head Self Sealing 10 -32 x 3/4 167781 2
12 Screw, Flat HD Phillips, #10 - 32 x 1/2, 18 - 8 S.S. 168284 1
13 Carriage Complete 168794 1
14 Vise, Complete 168800 1
15 Vise Drive Mount 168806 1
16 Rod, Swing Vise 168807 1
17 Threaded Drive Rod 168809 1
18 Guide Rod 168810 1
19 Rock Adjustment Rod 168 811 2
20 On/Off Rod 168812 1
21 Mount, Drive & Guide Rod 168813 1
22 Bracket, Clutch Mount 168814 1
23 Clutch Plate, Front 168815 1
24 Clutch Plate, Rear 168816 1
25 Coupler 168820 1
26 Bearing, Ball 3/8" x 1 - 1/8" 168822 1
27 Bearing Guide 168823 1
28 Knob, Vise 168869 1
29 Knob Assembly, Vise 168871 2
30 Bushing, Bronze Flanged 5/16 x 9/16 x 1/2 168873 1
31 Wood Clamp 168875 1
32 Nut, Flanged 1/4 - 20 168879 2
33 Spring, Complete 168891 2
34 Screw, Soc HD cap, 1/4 - 20 x 1 - 3/4 169707 2
BD10 PARTS LIST
BD-10 Assy. Vise P/N 168792

30
Barranca Diamond warrants to the original retail purchaser for a period of 1 year except as noted, from the
date of purchase all products covered by this Warranty to be free of defects in materials and workmanship.
This Warranty shall not apply to any parts that have been subjected to misuse or improper service, that had
been damaged in transit or handling, or that have been altered or repaired by unauthorized representatives.
This Warranty does not cover defects caused by or resulting from misuse, abuse, neglect or damage caused
by accident or the failure to provide reasonable maintenance. This Warranty is void if the product or any of its
individual components is altered or modied by the purchaser or if the product is used in a manner or with a
blade not recommended by the manufacturer.
Any claim arising under this Warranty must be submitted by the original purchaser within the warranty period
specied above, and shall include proof of purchase. During said warranty period Barranca Diamond shall,
at its option, either replace or repair, at no charge to the original purchaser, any parts or components that are
found to be defective by Barranca Diamond. Barranca Diamond shall not be responsible for or obligated to
pay for freight or other transportation related costs or expenses in connection with any defective products or
components that are either returned to Barranca Diamond’s facility or any authorized repair station and/or any
replacement products or components that are shipped from Barranca Diamond pursuant to this Warranty.
Parts and labor needed to maintain products and the replacement of components due to normal wear and tear
are the purchaser’s responsibility and are not covered by this Warranty. All products or components replaced
under warranty become the property of the manufacturer. All replacement parts will be considered to be part
of the original product and any warranty on such parts will expire coincidentally with the original Warranty.
Barranca Diamond will pay for parts and labor in connection with warranty repairs conducted by Barranca Dia-
mond or its authorized repair centers. Replacement part(s) installed by anyone else will be provided without a
charge for such replacement part(s), but this Warranty will not apply to labor charges in connection therewith.
IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT COST OF
ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF, AND BARRANCA DIAMOND SHALL NOT BE LI-
ABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE OR LOSS
NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.
The foregoing constitutes an expressed warranty on the terms set forth above and is the only warranty or
warranties applicable to the products it covers. All other warranties, including, without limitation, the implied
warranty of merchantability and/or tness for a particular purpose or use being denied. This limited warranty is
expressly in lieu of all other warranties, whether expressed or implied.
BARRANCA DIAMOND LIMITED WARRANTY
Please complete the warranty registration card and return. Any problems encountered should be directed to
Barranca Diamond Customer Service department at [phone] M-F 8am - 5pm PST.
NOTE THIS INFORMATION FOR FUTURE USE:
MODEL NUMBER:
SERIAL NUMBER:
PURCHASE PLACE:
PURCHASE DATE:
BD10 WARRANTY

31
SPECIFICS APPLICABLE TO LIMITED WARRANTY OF DIAMOND BLADES, CORE BITS, POLISHING
TOOLS AND SAWS
Laser Welded Blade and Bit Warranty
If the laser weld between the segment and the steel core or barrel fails during normal use, the blade or bit will
be replaced free of charge. Blades and bits damaged due to careless or improper use are not covered under
this warranty.
Brazed Blade, Bit, and Cup Wheel Warranty
If the brazed bond between the segment and the core, barrel, or cup fails within the rst .050 of segment wear,
the blade, bit, or cup will be replaced free of charge. Blades, bits, and cup wheels damaged due to careless or
improper use are not covered under this warranty.
Continuous Rim Blade Warranty
If the bond between the rim and the core fails during normal use, the blade will be replaced free of charge.
Blades and bits damaged due to careless or improper use are not covered under this warranty.
Exclusions
Barranca Diamond does not warrant the following components, which carry their own manufacturer’s warranty
for the indicated periods:
Electric Motors Manufacturer’s Warranty
Baldor: 1 year
Ryobi: 1 Year
Soga: 1 Year
Gas Engines Manufacturer’s Warranty
Honda: 2 years
Engine Power Information
Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary
among engine manufacturers. Barranca Diamond Products makes no claim, representation or Warranty as to
the power rating of the engine on this equipment and disclaims any responsibility or liability of any kind whatso-
ever with respect to the accuracy or the engine power rating. Users are advised to consult the engine manufac-
turer’s owners manual and website for specic information regarding the engine power rating.
BD10 WARRANTY

32
BD10 SERVICE & WARRANTY
REPLACEMENT PARTS
Replacement parts for this tool may be ordered from your Barranca Diamond distributor or directly from
Barranca Diamond. Please have the following information ready before calling:
• Model and serial number of the machine
• Date of purchase
• Description of parts being ordered (see parts list)
RETURN MATERIALS PROCEDURE
To expedite the service relative to the return of a product purchased through Barranca Diamond, please have
the following information available:
• Model and serial number of the machine
• Date of purchase
• Distributor’s name
Then please call Barranca Diamond at [phone] or toll free at 800-630-7682 to obtain a Return Goods
Authorization number (RGA) authorizing the return.
Please Note:
• Ensure your item(s) are prepaid to the destination
• Return items must have been purchased within the previous twelve (12) months
• Follow the packaging instructions in the following section
• Be sure to include the RGA number, return address and your phone number on or within the
return shipping box.
PACKAGING INSTRUCTIONS
Ship the equipment using its original shipping crate if possible. Secure inside the shipping crate. Ensure all
parts are secured in the packaging to prevent movement. Do not ship the equipment partially exposed.

33
NOTES

34
NOTES

35
NOTES

Barranca Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.barrancadiamond.com