BARTEC PIXAVI Orbit X EX User manual

Introduction
Button combinations
Congratulations! You are now using a
quality product made by BARTEC PIXAVI.
The Orbit X EX is intrinsically safe and
can be used in hazardous areas. All you
need to get started can be found in this
quick guide.
Action Button
Light Button
Power/Standby Button
Short Press
1 Second Press
3 Seconds Press
Take a Picture
Start/Stop Video Rec.
Call/Hang Up Video Call
Short Press
1 Second Press
Video Light On/Max/Off
Laser On/Off
Short Press
3 Seconds Press
Standby/Wake up
Power On/Off

Buttons And Ports
LED Video Light
Camera
Laser
Microphone 1
Microphone 2
Status LED
Power/Standby Button
Rugged Alu Housing
Action Button
Light Button
Audio Jack
Micro USB
Wi-Fi LED
Battery LED

Status LED
Battery and WIFI LED
Calling
In Call
Ready To Record
Recording
Pairing Mode
Booting
Ready For Use
Standby
Snapshot
Shutting Down
Pulsate
Constant
Pulsate
Constant
Pulsate
Pulsate
Constant
4 Sec Interval
One Blink
Constant
Strong Signal
Fair Signal
Not Connected
Full Battery
Ok Battery
Low Battery

Our Apps
Orbit X Setup
This app allows you to get
the Orbit X associated with
a wireless network, and
configure the device for
video communication.
Sipido
The Sipido video
conferencing app is using
SIP protocoll and allows
you to do mobile video
conference and live video
streaming from the device
over any network.
Collaboration X
Collaboration X is a Mobile
Device Management
solution that allows you to
remotely manage your
devices from your browser.
With this service, you can
remotely monitor, set
policies and wipe device
safely and securely. The
solution also offer other
MDM functionality.
Collaboration X will update
your OrbitX device to the
latest software release
automaticly whenever the
device is connected to
power.

The Orbit X works right out of the box.
But in order to take advantage of
advanced features like video conferenc-
ing, MDM functionality, over the air
updates and cloud media library storage
you have to connect your Orbit X device
to the internet using the Orbit X setup
app or the Collaboration X website.
Orbit X setup app:
1) Download and start the Orbit X setup
app from “Google Play” on your android
smart phone. The app is already
pre-installed if you are using an Impact X
or Gravity X device.
2) Select “first time setup” and follow the
tutorial.
Collaboration X website:
If your company has a Collaboration X
account the IT administrators can use
the "Orbit X Quick Setup" feature to
quickly associate the Orbit X with
Collaboration X.
1) Login to
www.collaborationx.pixavi.com or sign
up for a 30 days free Collaboration X trial
account.
2) Go to “Devices” and select “Orbit X
Quick Setup”.
First time setup of your Orbit X

The head mount system is designed to
be flexible and fit different types of
helmets and equipment. The Orbit X
snaps into the cradle and allows easy
access to the Orbit X on the go. Below
are two examples of head mount
configurations.
Mounting plate for flat
surfaces (e.g. walls)
Mounting plate for curved
surfaces (e.g. helmet)
Orbit X cradle with 2x
1/4” screw mount
Quick release bracket
Swivel brackets
Screws
Head mount setup

Charging
Support
Special Conditions For Safe Use
FAQs and technical support can be found
here: www.bartec-pixavi.com/support
The Orbit X has a high quality, high capacity
battery and shall only be charged using the
charger supplied with the unit. Charging the
Orbit X from 0% to 80% battery capacity
takes approximately 2hours. Charging the
remaining 80% to 100% takes 1 ½ hours.
The Orbit X should not be used/operated
during the charging process.
OrbitX EX version:
Ex ib parameter
Uo
Io
Po
Co
Lo
USB Interface
8.4 V
0.445 A
0.933 W
1.35 µF
3.06 µH
Headset
11.6 V
0.399 A
1.565 W
1.39 µF
20.6 µH
Label
Waterproof
The Orbit X camera is IP68 waterproof even
without the protective cover fitted over the
mini jack and USB connectors. The micro
USB and mini jack connectors are sealed on
the inside, and they are waterproof
themselves even without the protective
cover.
IC: 9249A -ORBITX
FCC ID : YML-ORBITX
AEx ib op is IIC T4 Gb
CI I, Div2, Grps A, B, C, D
Ex ib op is IIC T4 Gb
Sécurité intrinsèque
Ex ib op is IIC T4 Gb
IECEx SIR 14.0105X
Sira 14ATEX2287X
Intrinsically safe
Serial : PXRBEXxxxxxxxx
Mfr. Bartec Technor 4007-SVG-NO
261724
0470
II 2G
BARTEC-PIXAVI.COM
Model: OrbitX

Audio Levels
Recycling (WEEE)
The device is compliant with the EN9650-1
standard. However, third party music
players can exceed the recommended
audio levels, and as such should be used
with caution as prolonged listening to
sound at high volumes can cause
permanent damage.
If you wish to discard the Orbit X, please
contact your dealer or supplier. Do not
throw the device in your domestic
rubbish/trash.
Please make sure the connectors are dry
before connecting a USB cable, headset or
charging the unit.
Integrated Laser
The Orbit X has built-in Laser functionality
for realtime collaboration and highlighting.
The laser can be controlled with the
“light-button” It uses a class 2 laser

The ambient temperature range of the Orbit X
is -20°C to + 45°C
The Orbit X shall be protected from
contamination by liquid and dust; this is
normally achieved by the operator carrying
the device on their person.
The USB port shall only be used for charging
the Orbit X when in the non-hazardous area.
The Orbit X shall only be charged using the
charger specifically supplied for use with the
unit, part number USB-AC35M, manufactured
by Deltaco, part number 1001-0007,
manufactured by Ansmann or model
GT-41078-0505-USB and
GT-41078-0506-0.4-USB manufactured by
GlobTec. The maximum input voltage (Um)
from the charger between these lines is 5.6V.
The ambient temperature during charging
shall be in the range 0°C to 45°C. The charger
shall be approved for use in USA/Cananda
against CSA/UL 60950-1 or equivalent.
The USB port is also used for data download.
The port has been assessed with a Um of 5.8
V. The equipment connected to the USB port
shall be approved for use in USA/Canada
against CSA/UL 60950-1 or equivalent.
Conditions For Use (CSA)
Ce produit répond aux exigences de la section
15 de la réglementation FCC. Son fonctionne-
ment est soumis aux deux conditions
suivantes: (1) cet appareil ne doit pas causer
d'interférences nuisibles et (2) cet appareil
doit accepter toute interférence reçue, y
compris les interférences qui peuvent
provoquer un fonctionnement indésirable.

The ambient temperature range of the Orbit
X is -20°C to + 45°C
The Orbit X shall be protected from
contamination by liquid and dust; this is
normally achieved by the operator carrying
the device on their person.
The USB port shall only be used for
charging the Orbit X when in the
non-hazardous area. The Orbit X shall only
be charged using the charger specifically
supplied for use with the unit, part number
USB-AC35M, manufactured by Deltaco,
part number 1001-0007, manufactured by
Ansmann or model GT-41078-0505-USB
and GT-41078-0506-0.4-USB manufac-
tured by GlobTec. The maximum input
voltage (Um) from the charger between
these lines is 5.6V. The ambient
temperature during charging shall be in the
range 0°C to 45°C
The USB port is also used for data
download. The port has been assessed
with a Um of 5.8 V and shall be installed in
accordance with clause 12.2.1 of IEC
60079-14:2007/EN 60079-14:2008
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
Conditions For Use (ATEX & IECEx)
FCC/IC

The Orbit X Camera is a radio transmitter
and receiver. It is designed and manufac-
tured not to exceed the emission limits for
exposure to radio frequency (RF) energy set
by the Federal Communications
Commission (FCC) of the U.S. Government,
Industry Canada of the Canadian
Government (IC), and recommended by The
Council of the European Union.
The exposure standard for wireless devices
employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC/IC is 1.6W/kg. The
SAR limit recommended by The Council of
the European Union is 2.0W/kg. Tests for
SAR are conducted using standard
operating positions specified by the FCC/IC
with the device transmitting at its highest
certified power level in all tested frequency
bands.
For body worn operation, the Orbit X device
has been tested and meets the FCC/IC
exposure guidelines when used with an
accessory that contains no metal and that
positions the device a minimum of 10 mm
from the body. Such a device can i.e. be
BARTEC PIXAVI camera cradle.
Specic Absorption Rate Data

Quick guide